Detached leaf culture: viability to evaluate 2,4-D toxicity symptoms in cotton apex leaves

To study the viability of detached leaf culture technique, studies were carried out with detached leaves from cotton apex (true trilobed leaves). The prepared leaves were sprayed with 2,4-D amine and ester, at rates of 10, 30, 70, and 100% of the recommended doses. Detached leaves without herbicide spray were used as controls. Simultaneously, a greenhouse experiment was conducted with the same treatments as used for the detached leaves experiment. Toxicity was measured through a 0-to-5 grading according to the percentage of affected leaf area in the detached leaves experiment or examining the affected rate of whole plant as indicated in the greenhouse. Results showed that the ester form of the herbicide induced earlier and more severe toxicity symptoms in detached leaves and greenhouse grown plants. Positive and significant correlations (p < 0.001) were found between toxicity results obtained at 7 and 14 days after application in detached leaves and greenhouse plants (r = 0.97 and 0.92, respectively). Negative, significant correlations (p < 0.005) were found between the toxicity levels found at 7 and 14 days after application in detached leaves and dry matter of cotton plants grown in the greenhouse (r= - 0.92 and -0.92, respectively).     

Effect of alkalinity on the performance of a simulated landfill bioreactor digesting organic solid wastes

This study investigated the effects of alkalinity on the anaerobic treatment of the organic solid wastes collected from the kitchen of Engineering Faculty in Dokuz Eylul University, Izmir, Turkey and the leachate characteristics treated in three simulated landfill anaerobic bioreactors. All of the reactors were operated with leachate recirculation. One reactor was operated without alkalinity addition. The second reactor was operated by the addition of 3 g l-1 d-1 of NaHCO3 alkalinity to the leachate and the third reactor was operated by the addition of 6 g l-1 d-1 NaHCO3 alkalinity to the leachate. After 65 d of anaerobic incubation, it was observed that the chemical oxygen demand (COD), volatile fatty acids (VFA) concentrations, and biochemical oxygen demand to chemical oxygen demand (BOD5/COD) ratios in the leachate samples produced from the alkalinity added reactors were lower than the control reactor while the pH values were higher than the control reactor. The COD values were measured as 18900, 3800 and 2900 mg l-1 while the VFA concentrations were 6900, 1400 and 1290 mg l-1, respectively, in the leachate samples of the control, and reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 after 65 d of anaerobic incubation. The total nitrogen (TN), total phosphorus (TP) and ammonium nitrogen (NH4-N) concentrations in organic solid waste (OSW) significantly reduced in the reactor containing 6 g l-1 NaHCO3 by d 65. The values of pH were 6.54, 7.19 and 7.31, after 65 d of anaerobic incubation, respectively, in the aforementioned reactors results in neutral environmental conditions in alkalinity added reactors. Methane percentage of the control, reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 were 37%, 64% and 65%, respectively, after 65 d of incubation. BOD5/COD ratios of 0.27 and 0.25 were achieved in the 3 and 6 g l-1 NaHCO3 containing reactors, indicating a better OSW stabilization. Alkalinity addition reduced the waste quantity, the organic content of the solid waste and the biodegradation time.     

Microbiological aspects of humid husk composting

The feasibility of composting as disposal practice of husk mixed with olive mill wastewaters (OMW) was studied in the present research. The process was investigated with regards to some reliable and easy to be determined microbial activity parameters such as the ATP content, the activity of a pool of enzymes and the viable counts, keeping in mind the well known bias of this last technique. Two different composting technologies were compared: static pile and reactor by studying the cured composts obtained. Among the bioindicators tested, the composting process trend was described better by the ATP content and the activity of some enzymes. In fact, the ATP content showed an increase during the thermophilic phase in both the pile and the reactor, and decreased at the end of the process, it was also higher in the bioreactor-pile technology than in the pile. With regard to the enzymatic activity, with the reactor technology experiment, two peaks were evidenced in the thermophilic phase and during the curing phase in pile, and a drop during the transfer of material from the reactor to the pile. The quality of the cured product obtained using the reactor technology has been evaluated considering phytoxicity and hygienic features: the stabilised compost resulted to have neither phytoxical effect, nor faecal indicator contaminants.     

Mobility of heavy metals as related to soil chemical and mineralogical characteristics of Brazilian soils

In order to better understand the relationship between soil characteristics and mobility of some heavy metals, correlation studies were conducted in samples of unlimed and limed A, B and C horizons of three Brazilian soils, representative of the majority of the tropical soils. A number of chemical and mineralogical characteristics of one Oxisol and two Ultisols were related to the retardation factors (Rf) for zinc (Zn), cadmium (Cd), copper (Cu) and lead (Pb). The retardation factors, obtained in leaching column experiments, were used as an estimate of solute movement in the profile. Soil types and soil horizons were found to influence metal retardation factors which, in turn, correlated better with the chemical than the mineralogical soil characteristics. For the unlimed soil samples, the soil characteristics that significantly correlated with Zn-Rf and Cd-Rf were the sum of exchangeable bases (SB), and soil exchangeable (Ca-KCl) and non-exchangeable (Ca-HCl) calcium contents. These results showed the strong influence of the cation exchange phenomenon on the retention and mobility of these two metals. For Cu and Pb, not only SB, cation exchange capacity (CEC) and Ca-KCl and Ca-HCl but also the organic matter correlated well with the Rf, showing that complex or chelate formation may play an important role in the movement of these elements. The important soil chemical characteristics related to the retardation factors in the limed soil samples were SB for Cd, and Ca-HCl for Cu and Pb, suggesting that precipitation may also influence the mobility and retention of the latter two heavy metals in these soil samples. Soil pH influenced the heavy metals adsorption and movement as shown by the significant correlation with the retardation factors when the combined data for the unlimed and limed soil samples was considered.     

Modulation of branchial ion transport protein expression by salinity in glass eels (<Emphasis Type="Italic">Anguilla anguilla</Emphasis> L.)

The Anguillid juvenile glass eel must deal with the osmoregulatory consequences of highly variable environmental salinities on its recruitment migration from coastal to fresh waters. Changes in ionoregulatory parameters and branchial ion transport protein [Na⁺/K⁺-ATPase, Na⁺:K⁺:2Cl⁻ cotransporter (NKCC), cystic fibrosis transmembrane regulator (CFTR) anion channel, V-type proton ATPase] expression (activities, protein and/or mRNA level expression and/or cellular localization) in response to acclimation to a broad range of ionic strengths [distilled water (DW) to hypersaline water (HSW; 150%) sea water (SW 32‰)] was studied. The estuarine glass eels were very euryhaline and successfully acclimated to acute changes in environmental ionic strength from 50% SW, with high mortality only observed in HSW (51%) and sublethal osmoregulatory indicators (whole body water content and sodium levels) disturbed at the extremes (DW and HSW). Central to a high salinity acclimation were elevated branchial Na⁺/K⁺-ATPase, NKCC and CFTR expression. At lower salinity, Na⁺/K⁺-ATPase expression was maintained and NKCC and CFTR expressions were reduced. Branchial chloride cells increased in size up to SW but decreased in HSW. During hypotonic disturbance (DW), no compensatory elevation in V-ATPase or Na⁺/K⁺-ATPase expression was observed.     

前地板工艺分析及修边冲孔模具设计

介绍了冲压上常见的大型覆盖件的冲压工艺方案的确定过程 ,并以S0 1农用皮卡车“前地板”为例 ,针对此件外形复杂 ,成形深度大 ,模具加工周期大 ,成本高等问题 ,进行了详细的冲压工艺分析 ,确定了合理的冲压工序 ,且着重介绍了修边冲孔模具的设计要点及简化模具加工工艺 ,降低模具成本 ,缩短制模周期等措施     

Use of organic coagulant/flocculant for treatment of effluents generated in intensive rearing of swine

Separation of water for reuse is essential in an effluent treatment system, especially in activities with high water consumption, such as a pig production system. The objective of this work was to evaluate the efficiency of Tanfloc SG^® coagulant tannin/organic flocculant used to treat effluent generated during the intensive rearing of swine. For the evaluation, laboratory and in situ tests (field test) were performed. The laboratory tests were performed to define the concentration (1 and 16%), dosage (0, 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 2.0, 4.0, 8.0, and 16.0 milliliters of the solution), and time (24, 48, 72, and 96 hours) of coagulation/flocculation treatment of the solid portion of the effluent. The parameters pH, turbidity, oxidation reduction potential, dissolved oxygen, and electroconductivity (in microsiemens per centimeter) were evaluated using a multiparameter probe and the parameters ammonia (NH₃), nitrate (NO₃), and nitrite (NO₂) in the laboratory, in relation to the coagulation/flocculation time of the solid part of the effluent. The use of tannin as a coagulant/flocculant of plant origin in the treatment of swine effluents was effective in reducing turbidity and concentrations of ammonia, nitrite, and nitrate, and it allowed separation of the solid–liquid phase in approximately 68% as liquid phase.     

Barriers,potentialities, and actions for implementation of sustainable energy procedures in Brazilian federal universities

Many universities around the world have served as active centers for research on climate change. However, there are several barriers to their activities, stemming from the nature of research, resources, and the structure of institutions. This document provides an overview of barriers, potential factors, and activities to develop and implement sustainable energy processes in public higher education institutions (HEIs) in Brazil. The research was conducted from March to April of 2018 with representatives of HEIs (rectors or prorectors of research). A total of 63 invitations to respond to the Survey‐monkey survey were emailed, and responses were received from 32 universities. The research concludes by proposing measures that can be taken to make the issue of climate change more present and effective in university research and teaching activities. This includes changes in research, information dissemination, and teaching approaches to better support actions to address climate change. In Brazil, there are many potentialities in terms of natural resources, but actions for implementation are still incipient. Further efforts and investment in research and development will be required.     

Preparation of jet engine range fuel from biomass pyrolysis oil through hydrogenation and its comparison with aviation kerosene

The Bio-oil was produced from the pyrolysis of agricultural wastes (Eucalyptus sawdust) and discarded soybean frying oil. The temperature of the pyrolysis system was initiated at 28°C and increased to 850°C. Atmospheric distillation of crude bio-oil was performed and a fraction at a temperature range 160–240°C (pyrolysis oil) was separated and subjected to GC-MS, ¹H-NMR, TGA and FTIR analysis to identify the different properties and compounds present in pyrolysis oil. It was noticed that there was an abundance of oxygen and nitrogen containing compounds as well as other reactive species in pyrolysis oil. To reduce the amount of these species, the pyrolysis oil was subjected to hydrogenation in the presence of NiMo as a catalyst. After hydrogenation, the atmospheric distillation of hydrogenated bio-oil was performed and another fraction at temperature range 160–240°C (hydrogenated bio-oil) was separated and analyzed by the same techniques. It was noticed that during hydrogenation, more than 60% oxygenated and other reactive species were converted into hydrocarbons. Hydrogenated bio-oil showed very similar physico-chemical properties such as distillation curve, density, viscosity, freezing point, flash point, the presence of hydrocarbons and enthalpy of combustion as aviation kerosene also known as QAV-1.