The impact of EDTA on lead distribution and speciation in the accumulator Sedum alfredii by synchrotron X-ray investigation

The in vivo localization and speciation of lead (Pb) in tissues of the accumulator Sedum alfredii grown in EDTA-Pb and Pb(NO₃)₂ was studied by synchrotron X-ray investigation. The presence of EDTA-Pb in solution resulted in a significant reduction of Pb accumulation in S. alfredii. Lead was preferentially localized in the vascular bundles regardless of treatments but the intensities of Pb were lower in the plants treated with EDTA. Lead was predominantly presented as a Pb-cell wall complex in the plants regardless of its supply form. However, a relatively high proportion of Pb was observed as Pb-EDTA complex when the plant was treated with EDTA-Pb, but as a mixture of Pb₃(PO₄)₂, Pb-malic, and Pb-GSH when cultured with ionic Pb. These results suggest that EDTA does not increase the internal mobility of Pb, although the soluble Pb-EDTA complex could be transported and accumulated within the plants of S. alfredii.     

The internal microstructure and fibrous mineralogy of fly ash from coal-burning power stations

Coal fly ash (CFA) is a significant environmental pollutant that presents a respiratory hazard when airborne. Although previous studies have identified the mineral components of CFA, there is a paucity of information on the structural habits of these minerals. Samples from UK, Polish and Chinese power stations were studied to further our understanding of the factors that affect CFA geochemistry and mineralogy. ICP-MS, FE-SEM/EDX, XRD, and laser diffraction were used to study physicochemical characteristics. Analysis revealed important differences in the elemental compositions and particle size distributions of samples between sites. Microscopy of HF acid-etched CFA revealed the mullite present possesses a fibrous habit; fibres ranged in length between 1 and 10 μm. Respirable particles (<10 μm) were frequently observed to contain fibrous mullite. We propose that the biopersistence of these refractory fibres in the lung environment could be contributing towards chronic lung diseases seen in communities and individuals continually exposed to high levels of CFA.     

Adaptive management of the Great Barrier Reef and the Grand Canyon world heritage areas

Conventional perceptions of the interactions between people and their environment are rapidly transforming. Old paradigms that view humans as separate from nature, natural resources as inexhaustible or endlessly substitutable, and the world as stable, predictable, and in balance are no longer tenable. New conceptual frameworks are rapidly emerging based on an adaptive approach that focuses on learning and flexible management in a dynamic social-ecological landscape. Using two iconic World Heritage Areas as case studies (the Great Barrier Reef and the Grand Canyon) we outline how an improved integration of the scientific and social aspects of natural resource management can guide the evolution of multiscale systems of governance that confront and cope with uncertainty, risk, and change in an increasingly human-dominated world.     

Source apportionment of fine particulate matter in Phoenix, AZ, using positive matrix factorization

Speciated particulate matter (PM)2.5 data collected as part of the Interagency Monitoring of Protected Visual Environments (IMPROVE) program in Phoenix, AZ, from April 2001 through October 2003 were analyzed using the multivariate receptor model, positive matrix factorization (PMF). Over 250 samples and 24 species were used, including the organic carbon and elemental carbon analytical temperature fractions from the thermal optical reflectance method. A two-step approach was used. First, the species excluding the carbon fractions were used, and initially eight factors were identified; non-soil potassium was calculated and included to better refine the burning factor. Next, the mass associated with the burning factor was removed, and the data set rerun with the carbon fractions. Results were very similar (i.e., within a few percent), but this step enabled a separation of the mobile factor into gasoline and diesel vehicle emissions. The identified factors were burning (on average 2% of the mass), secondary transport (7%), regional power generation (13%), dust (25%), nitrate (9%), industrial As/Pb/Se (2%), Cu/Ni/V (7%), diesel (9%), and general mobile (26%). The overall contribution from mobile sources also increased, as some mass (OC and nitrate) from the nitrate and regional power generation factors were apportioned with the mobile factors. This approach allowed better apportionment of carbon as well as total mass. Additionally, the use of multiple supporting analyses, including air mass trajectories, activity trends, and emission inventory information, helped increase confidence in factor identification.     

Analysis and apportionment of organic carbon and fine particulate matter sources at multiple sites in the midwestern United States

Speciated fine particulate matter (PM2.5) data collected as part of the Speciation Trends Network at four sites in the Midwest (Detroit, MI; Cincinnati, OH; Indianapolis, IN; and Northbrook, IL) and as part of the Interagency Monitoring of Protected Visual Environments program at the rural Bondville, IL, site were analyzed to understand sources contributing to organic carbon (OC) and PM2.5 mass. Positive matrix factorization (PMF) was applied to available data collected from January 2002 through March 2005, and seven to nine factors were identified at each site. Common factors at all of the sites included mobile (gasoline)/secondary organic aerosols with high OC, diesel with a high elemental carbon/OC ratio (only at the urban sites), secondary sulfate, secondary nitrate, soil, and biomass burning. Identified industrial factors included copper smelting (Northbrook, Indianapolis, and Bondville), steel/manufacturing with iron (Northbrook), industrial zinc (Northbrook, Cincinnati, Indianapolis, and Detroit), metal plating with chromium and nickel (Detroit, Indianapolis, and Bondville), mixed industrial with copper and iron (Cincinnati), and limestone with calcium and iron (Bondville). PMF results, on average, accounted for 96% of the measured PM2.5 mass at each site; residuals were consistently within tolerance (+/-3), and goodness-of-fit (Q) was acceptable. Potential source contribution function analysis helped identify regional and local impacts of the identified source types. Secondary sulfate and soil factors showed regional characteristics at each site, whereas industrial sources typically appeared to be locally influenced. These regional factors contributed approximately one third of the total PM2.5 mass, on average, whereas local mobile and industrial sources contributed to the remaining mass. Mobile sources were a major contributor (55-76% at the urban sites) to OC mass, generally with at least twice as much mass from nondiesel sources as from diesel. Regional OC associated with secondary sulfate and soil was generally low.     

U(VI) adsorption on aquifer sediments at the Hanford Site

Aquifer sediments collected via split-spoon sampling in two new groundwater wells in the 200-UP-1 operable unit at the Hanford Site were characterized and showed typical Ringold Unit E Formation properties dominated by gravel and sand. High iron-oxide content in Fe oxide/clay coatings caused the highest U(VI) adsorption as quantified by batch K(d) values, indicating iron oxides are the key solid adsorbent in the 200-UP-1 sediments that affect U(VI) fate and mobility. Even though U(VI) adsorption on the gravel-sized fraction of the sediments is considered to be negligible, careful characterization should be conducted to determine U(VI) adsorption on gravel, because of presence of Fe oxides coatings and diffusion-controlled adsorption into the gravel particles' interior surfaces. A linear adsorption isotherm was observed up to 10(-6) M (238 microg/L) of total U(VI) concentration in batch U(VI) adsorption tests with varying total U(VI) concentrations in spiked groundwater. U(VI) adsorption decreased with increasing concentrations of dissolved carbonate, because strong anionic aqueous uranium-carbonate complexes formed at high pH and high alkalinity conditions. Noticeable uranium desorption hysteresis was observed in a flow-through column experiment, suggesting that desorption K(d) values for aged uranium-contaminated sediments at the Hanford Site can be larger than adsorption K(d) values determined in short-term laboratory experiments and slow uranium release from contaminated sediments into the groundwater is expected.     

Toxicity of cobalt-complexed cyanide to <Emphasis Type="Italic">Oncorhynchus mykiss,Daphnia magna</Emphasis>, and <Emphasis Type="Italic">Ceriodaphnia dubia</Emphasis>

Background Cobalt cyanide complexes often result when ore is treated with cyanide solutions to extract gold and other metals. These have recently been discovered in low but significant concentrations in effluents from gold leach operations. This study was conducted to determine the potential toxicity of cobalt-cyanide complexes to freshwater organisms and the extent to which ultraviolet radiation (UV) potentiates this toxicity. Tests were also conducted to determine if humic acids or if adaptation to UV influenced sensitivity to the cyanide complexes. Methods Rainbow trout (Oncorhynchus mykiss), Daphnia magna, and Ceriodaphnia dubia were exposed to potassium hexacyanocobaltate in the presence and absence of UV radiation, in the presence and absence of humic acids. Cyano-cobalt exposures were also conducted with C. dubia from cultures adapted to elevated UV. Results With an LC50 concentration of 0.38 mg/L, cyanocobalt was over a 1000 times more toxic to rainbow trout in the presence of UV at a low, environmentally relevant irradiance level (4 μW/cm² as UVB) than exposure to this compound in the absence of UV with an LC50 of 112.9 mg/L. Toxicity was immediately apparent, with mortality occurring within an hour of the onset of exposure at the highest concentration. Fish were unaffected by exposure to UV alone. Weak-acid dissociable cyanide concentrations were observed in irradiated aqueous solutions of cyanocobaltate within hours of UV exposure and persisted in the presence of UV for at least 96 hours, whereas negligible concentrations were observed in the absence of UV. The presence of humic acids significantly diminished cyanocobalt toxicity to D. magna and reduced mortality from UV exposure. Humic acids did not significantly influence survival among C. dubia. C. dubia from UV-adapted populations were less sensitive to metallocyanide compounds than organisms from unadapted populations. Conclusions The results indicate that metallocyanide complexes may pose a hazard to aquatic life through photochemically induced processes. Factors that decrease UV exposure such as dissolved organic carbon or increased pigmentation would diminish toxicity.     

Line transect sampling of Karner blue butterflies ( Lycaeides melissa samuelis)

Line transect sampling is an effective survey method for estimating butterfly densities because it provides unbiased estimates of site-density (provided key assumptions are met), and estimates are comparable among sites. For monitoring Karner blue butterflies in Wisconsin, USA, comparable estimates are required because each year a different selection of sites will be monitored. Annual state-wide indices of species abundance can be derived from the site-surveys and compared to previous year's indices to monitor trends. We advocate that line transect sampling is preferable to Pollard-Yates transects as a survey technique for monitoring Karner blue butter- flies. The Pollard-Yates surveys do not adjust for diferences in site detectability. As a consequence, estimates of among-site from Pollard-Yates surveys can be biased. © Rapid Science 1998     

Volatiles from the bark of trembling aspen, Populus tremuloides Michx. (Salicaceae) disrupt secondary attraction by the mountain pine beetle, Dendroctonus ponderosae Hopkins (Coleoptera: Scolytidae)

Summary. Coupled gas chromatographic-electroantennographic detection (GC-EAD) analysis of the Porapak Q-captured volatiles from the bark of trembling aspen, Populus tremuloides Michx., revealed four compounds that consistently elicited antennal responses by mountain pine beetles (MPBs), Dendroctonus ponderosae Hopkins. One of these, 1-hexanol, disrupted the capture of MPBs in multiple-funnel traps baited with the aggregation pheromones trans-verbenol and exo-brevicomin and the host kairomone myrcene, a blend of semiochemicals that mediates the secondary attraction response in which beetles mass attack and kill living pines. The other three EAD-active aspen bark volatiles, benzyl alcohol, benzaldehyde and nonanal, were inactive alone, but in binary and ternary combinations contributed to a disruptive effect in an additive and redundant manner when all four aspen bark volatiles were tested in all possible binary and ternary blends. The best ternary blend and the quarternary blend achieved ≥ 80% disruption. The quarternary blend enhanced the disruptive effect of the antiaggregation pheromone verbenone in traps, raising the disruptive effect to 98%, and also enhanced the inhibition of attack on attractant-baited lodgepole pines. This is the first demonstration of specific compounds from the bark of angiosperm trees that disrupt the secondary attraction response of sympatric coniferophagous bark beetles. The results support the hypothesis that such bark beetles are adapted to recognize and avoid non-host angiosperm trees by responding to a broad spectrum of volatiles that can act in various blends with equal effect. Received 27 October 1997; accepted 20 February 1998.