The effect of repeated vibration signals on worker behavior in established and newly founded colonies of the honey bee, <Emphasis Type="Italic">Apis mellifera</Emphasis>

Communication signals used in animal social interactions are frequently performed repetitively, but the function of this repetition is often not well understood. We examined the effects of signal repetition by investigating the behavior of worker honey bees that received differing numbers of vibration signals in established and newly founded colonies, which could use signal repetition differently to help adjust task allocations to the labor demands associated with the different stages of colony development. In both colony types, more than half of all monitored workers received more than one vibration signal, and approximately 12% received ≥5 signals during a given 20-min observation period. Vibrated recipients exhibited greater activity and task performance than same-age non-vibrated controls at all levels of signal activity. However, vibrated workers showed similar levels of task performance, movement rates, cell inspection rates, and trophallactic exchanges regardless of the number of signals received. Thus, the repeated performance of vibration signals on individual bees did not cause cumulative increases in the activity of certain workers, but rather may have functioned to maintain relatively constant levels of activity and task performance among groups of recipients. The established and newly founded colonies did not differ in the extent to which individual workers received the different numbers of vibration signals or in the levels of activity stimulated by repeated signals. Previous work has suggested that compared to established colonies, newly founded colonies have a greater number of vibrators that perform signals on a greater proportion of the workers they contact. Taken in concert, these results suggest that vibration signal repetition may help to adjust task allocations to the different stages of colony development by helping to maintain similar levels of activity among a greater total number of recipients, rather than by eliciting cumulative effects that cause certain recipients to work harder than others.     

Male mate choice favors more colorful females in the gift-giving cabbage butterfly

While the phenomenon of male mate choice has attracted considerable attention in the last two decades, whether this sexual selection mechanism could drive the evolution of female ornaments remains poorly understood. Here, we used experimental manipulation of female wing coloration to investigate male mate choice in Pieris rapae, a gift-giving butterfly. Further, we tested whether males’ nutritional status influenced their mating preferences by subjecting larvae to short periods of starvation. We found that males showed significantly more mating approaches toward control females with more colorful wings (higher pteridine content), and that this preference was strongest in low-nutrition males. Additionally, a study of field-collected females revealed that pteridine-based wing coloration was positively correlated with female egg load, which suggests such ornaments may signal female quality. Pteridine-based ornaments are widespread in nature, however their potential as honest signals in male mate choice remains largely unexplored. This work furthers our understanding of how male mate choice and female ornamentation may evolve in species whose mating systems include nutritional nuptial gifts.     

Behavior and ecology of Old World Luperini beetles of the genusAulacophora (Coleoptera: Chrysomelidae)

Summary The attraction of Old World leaf beetles in the genusAulacophora to kairomones and parakairomones which are effective lures for New WorldDiabrotica andAcalymma were investigated. Beetles captured on sticky traps baited with single and multicomponent lures were no different from the control traps for two species ofAulacophora. Yellow colored traps and squash blossoms are attractive toAulacophora beetles which detect sub-microgram quantities of cucurbitacins on silica gel. Leaf feeding behavior and flight activity data are correlated with varietal preference of threeAulacophora species. The common response byDiabrotica andAulacophora to cucurbitacins reinforces the two groups' coevolutionary association with the Cucurbitaceae. The apparent lack of a common response toCucurbita blossom volatiles suggests recent evolutionary pathways are substantially different for these two groups of beetles.     

Dredging impact on an urbanized Florida bayou: effects on benthos and algal-periphyton.

Environmental effects of dredging events have been uncommonly reported for shallow, residential estuaries characteristic of the Gulf of Mexico region. The objective of this study was to determine the impact of hydraulic dredging on an urbanized estuary. Physicochemical quality, benthic community composition, whole sediment toxicity, periphytic algal community composition and trace metal tissue quality were determined prior to and after dredging. The effects on surface water pH, dissolved oxygen, and temperature were negligible but photosynthetically active radiation was decreased at several stations. Dredging significantly reduced benthic diversity and density (P < 0.05). However, the sediments were not acutely toxic to the epibenthic, Americamysis bahia (formerly Mysidopsis bahia); survival averaged 93% (post-dredging) and to 98% (pre-dredging). There were several post-dredging taxonomic structural changes in the diatom-dominated, periphyton community but differences in mean density and three diversity indices were not significant. Trace metal concentration in periphyton after dredging were reduced from an average of 4-65% and significantly for mercury, zinc and chromium in several areas. It was concluded that the environmental impact of small-scale dredging events in urbanized near-coastal areas, based on the selected parameters, are likely to be localized and of short-term environmental consequence. The choice of the target biota, response parameters and chemical analysis are important considerations in the environmental impact assessment of these periodic episodic events.     

Source Apportionment Using Positive Matrix Factorization on Daily Measurements of Inorganic and Organic Speciated PM(2.5)

Particulate matter less than 2.5 microns in diameter (PM(2.5)) has been linked with a wide range of adverse health effects. Determination of the sources of PM(2.5) most responsible for these health effects could lead to improved understanding of the mechanisms of such effects and more targeted regulation. This has provided the impetus for the Denver Aerosol Sources and Health (DASH) study, a multi-year source apportionment and health effects study relying on detailed inorganic and organic PM(2.5) speciation measurements.In this study, PM(2.5) source apportionment is performed by coupling positive matrix factorization (PMF) with daily speciated PM(2.5) measurements including inorganic ions, elemental carbon (EC) and organic carbon (OC), and organic molecular markers. A qualitative comparison is made between two models, PMF2 and ME2, commonly used for solving the PMF problem. Many previous studies have incorporated chemical mass balance (CMB) for organic molecular marker source apportionment on limited data sets, but the DASH data set is large enough to use multivariate factor analysis techniques such as PMF.Sensitivity of the PMF2 and ME2 models to the selection of speciated PM(2.5) components and model input parameters was investigated in depth. A combination of diagnostics was used to select an optimum, 7-factor model using one complete year of daily data with pointwise measurement uncertainties. The factors included 1) a wintertime/methoxyphenol factor, 2) an EC/sterane factor, 3) a nitrate/polycyclic aromatic hydrocarbon (PAH) factor, 4) a summertime/selective aliphatic factor, 5) an n-alkane factor, 6) a middle oxygenated PAH/alkanoic acid factor and 7) an inorganic ion factor. These seven factors were qualitatively linked with known PM(2.5) emission sources with varying degrees of confidence. Mass apportionment using the 7-factor model revealed the contribution of each factor to the mass of OC, EC, nitrate and sulfate. On an annual basis, the majority of OC and EC mass was associated with the summertime/selective aliphatic factor and the EC/sterane factor, respectively, while nitrate and sulfate mass were both dominated by the inorganic ion factor. This apportionment was found to vary substantially by season. Several of the factors identified in this study agree well with similar assessments conducted in St. Louis, MO and Pittsburgh, PA using PMF and organic molecular markers.     

Changes in character of organics in the receiving environment of effluent from a sulphite pulp mill

Purpose

The characteristics of organics in sulphite pulp mill effluent and in the receiving environment of effluent discharge were investigated to assess the basis for the persistence or attenuation of colour.

Methods

Characterization of organics was conducted through determination of SUVA, specific colour, and molecular weight distribution of organics using high performance size exclusion chromatography and by solid-state ¹³?C cross polarization (CP) NMR. The characteristics of organics from mill wastewater before and after secondary aerobic treatment, followed by lime treatment and from the receiving environment, an enclosed brackish lake were compared. Changes in the character of organics in lake water over a period of 14?years were studied in the context of changes in mill processing and climate impacts.

Results

High colour in mill effluent and in receiving waters correlated with high SUVA and specific colour levels, high molecular weight range and aromatic content. Conversely, lake waters with low colour had UV absorbing compounds of much lower molecular weight range and low relative abundance of aromatic compounds. Attenuation of colour and changes in the character of organics in the receiving environment coincided with increased concentrations of metal cations.

Conclusions

These increased concentrations appear to be due to the effects of climate change, lake management and their presence in mill effluent, with subsequent discharge to the lake. Attenuation of colour was found to be predominantly through removal of high molecular weight aromatic compounds where the removal processes could be through adsorption and co-precipitation with divalent metals, as well as through dilution processes.     

Speciated arsenic in air: measurement methodology and risk assessment considerations

Accurate measurement of arsenic (As) in air is critical to providing a more robust understanding of arsenic exposures and associated human health risks. Although there is extensive information available on total arsenic in air, less is known on the relative contribution of each arsenic species. To address this data gap, the authors conducted an in-depth review of available information on speciated arsenic in air. The evaluation included the type of species measured and the relative abundance, as well as an analysis of the limitations of current analytical methods. Despite inherent differences in the procedures, most techniques effectively separated arsenic species in the air samples. Common analytical techniques such as inductively coupled plasma mass spectrometry (ICP-MS) and/or hydride generation (HG)- or quartz furnace (GF)-atomic absorption spectrometry (AAS) were used for arsenic measurement in the extracts, and provided some of the most sensitive detection limits. The current analysis demonstrated that, despite limited comparability among studies due to differences in seasonal factors, study duration, sample collection methods, and analytical methods, research conducted to date is adequate to show that arsenic in air is mainly in the inorganic form. Reported average concentrations of As(III) and As(V) ranged up to 7.4 and 10.4 ng/m3, respectively, with As(V) being more prevalent than As(III) in most studies. Concentrations of the organic methylated arsenic compounds are negligible (in the pg/m3 range). However because of the variability in study methods and measurement methodology, the authors were unable to determine the variation in arsenic composition as a function of source or particulate matter (PM) fraction. In this work, the authors include the implications of arsenic speciation in air on potential exposure and risks. The authors conclude that it is important to synchronize sample collection, preparation, and analytical techniques in order to generate data more useful for arsenic inhalation risk assessment, and a more robust documentation of quality assurance/quality control (QA/QC) protocols is necessary to ensure accuracy, precision, representativeness, and comparability.     

Influence of liberated silver from silver nanoparticles on nitrification inhibition of Nitrosomonas europaea

The ecotoxicity of silver nanoparticles (Ag-NPs) to wastewater biota, including ammonia oxidizing bacteria (AOB), is gaining increasing interest as the number of products containing Ag-NPs continues to rise exponentially and they are expected to accumulate in wastewater treatment plants. This research demonstrated that the addition order of Ag-NP and the media constituents had a profound influence on the stability of the Ag-NP suspension and the corresponding repeatability of results and sensitivity of Nitrosomonas europaea. N. europaea, a model AOB, was found to be extremely sensitive to ionic silver (Ag⁺) and two sizes of Ag-NPs (20 and 80 nm). Ag⁺ exposures resulted in the highest level of toxicity with smaller Ag-NPs (20 nm) being more toxic than larger Ag-NPs (80 nm). The increased sensitivity of N. europaea to smaller Ag-NPs was caused by their higher rates of dissolved silver (dAg) release, via dissolution, due to a greater surface area to volume ratio. dAg was shown to be responsible for the vast majority of the observed Ag-NP toxicity, as determined by abiotic Ag-NP dissolution tests. For the sizes of Ag-NP studied (20 and 80 nm), there appears to be a negligible nanoparticle-specific toxicity. This was further supported by similarities in inhibition mechanisms between Ag⁺ and Ag-NP, with both causing decreases in AMO activity and destabilization of the outer-membrane of N. europaea. Finally, equal concentrations of total silver were found to be tightly associated to both Ag⁺ and Ag-NP-exposed cells despite Ag-NP concentrations being five times greater, by mass, than Ag⁺ concentrations.     

Metrics for integrating sustainability evaluations into remediation projects

The US Sustainable Remediation Forum (SURF) created a compilation of metrics (Metrics Toolbox) in response to a need for a broad set of metrics that could be used to assess and monitor the effectiveness of remedies in achieving sustainability goals. Metrics are the key impacts, outcomes, or burdens that are to be assessed or balanced to determine the influences and impacts of a remedial action. Metrics can reflect any of the three aspects of sustainability (i.e., environmental, social, or economic) or a combination of these aspects. Regardless, metrics represent the most critical sustainable outcomes from the perspective of the key stakeholders. The Metrics Toolbox is hosted online at www.sustainableremediation.org/library/guidance‐tools‐and‐other‐resources . By selecting metrics from the Metrics Toolbox as a starting point and considering a potentially wider suite of metrics in remedial program decisions, appropriate assessments can be made. Qualitative and quantitative metrics are tabulated for each remedial phase: remedial investigation, remedy selection, remedial design, remedial construction, operation and maintenance, and closure. Attributes for each metric are described so that remediation practitioners and key stakeholders can view the universe of metrics available and select the most relevant, site‐specific metrics for a particular site. For this reason, SURF recommends that remediation practitioners consider the metrics compiled in the Metrics Toolbox as a companion to the sustainable remediation framework published elsewhere in this journal and other sustainability evaluations. © 2011 Wiley Periodicals, Inc.     

Environmental metabolites of fluoroquinolones: synthesis, fractionation and toxicological assessment of some biologically active metabolites of ciprofloxacin

Background, aim, and scope

Biowastes produced by humans and animals are routinely disposed of on land, and concern is now growing that such practices provide a pathway for fluoroquinolone (FQs) antibacterial agents and their environmental metabolites (FQEMs) to contaminate the terrestrial environment. The focus of concern is that FQs and FQEMs may accumulate in amended soils to then adversely impact on the terrestrial environment. One postulated impact is the development of a selective environment in which FQ-resistant bacteria may grow. To find evidence in support of an accumulation of antibacterial-like activity, it was first necessary to establish whether any biologically active FQEMs could be synthesized by physicochemical factors that are normally present in the environment. However, many FQEMs are not commercially available to be used as standards in such studies. FQEMs were therefore synthesized using well-defined processes. They were subsequently analyzed using spectroscopy (UV-vis) and high performance liquid chromatography with mass spectral detection. The antibacterial-like activities of fractionated FQEMs were then assessed in novel bacterial growth inhibition bioassays, and results were compared to those obtained from instrumental analyses.

Materials and Methods

Parent FQs were either exposed to sunlight or were synthesized using defined aerobic microbial (Mycobacterium gilvum or a mixed culture derived from an agricultural soil) fermentation processes. Mixtures of FQEMs derived from photo- and (intracellular) microbial processes were isolated by preparative chromatography and centrifugation techniques, respectively. Mixtures were subsequently fractionated using analytical high-performance thin layer chromatography (HPTLC), and excised analytes were tested in bioautography assays for their antibacterial-like activities. Two bacteria, Escherichia coli (E. coli) and Azospirillum brasilense (A. brasilense) were used as reporter organisms in testing FQ standards and any subtle differences between biologically active FQEMs of ciprofloxacin (CF).

Results and discussion

FQEMs produced in the photo-synthetic process had UV-vis profiles that were indistinguishable from the parent FQs, and yet mass spectral data revealed the presence of N-formylciprofloxacin (FCF). In contrast, the UV-vis profiles of FQEMs synthesized by M. gilvum and a mixed culture of microorganisms had UV-vis profiles that were similar to one another and markedly different to the parent fluoroquinolones. Mass spectral studies confirmed the presence of FCF and N-acetylciprofloxacin in both microbial ferments. In addition, a photo-FQEM (Cp 6), three M. gilvum FQEMs (Cm 5, Cm 8, and Cm 10) and a mixed culture FQEM (Cs 6) of CF and many other FQEMs of CF, norfloxacin (NF), and enrofloxacin (EF) were fractionated using HPTLC, although their identities have yet to be confirmed. Differences between bioautography results were obtained when E. coli or A. brasilense were used as reporter organisms. Parent FQs (CF and EF) and the FQEMs of CF (Cp 6, Cm 8, and Cs 6) displayed antibacterial-like activity when using E. coli as the reporter organism. In contrast, A. brasilense was insensitive to parent CF and sensitive to EF and all tested FQEMs of CF. Results are consistent with photo- and microbial processes modifying CF in different ways, with the latter changing the UV-vis chromophores. It can be inferred that a lack of detection of analytes (especially photo-FQEMs) when using UV-vis does not necessarily indicate an absence of analyte. Additionally, similarities between the UV-vis profiles of FQEMs extracted from the (monoculture) M. gilvum and the mixed culture microbial aerobic ferments are consistent with similar processes operating in both ferments. Results of HPTLC and bioautography studies revealed that mixtures of (photo- and microbial) FQEMs could be fractionated into individual components.

Conclusions

Bioactive FQEMs of ciprofloxacin, as a representative FQ, can be synthesized by photo- and microbial processes, and their detection required the use of both instrumental and bioautography analytical techniques. It is likely that such FQEMs will also be present on agricultural land that has been repeatedly amended with FQ-contaminated biosolids.

Recommendations and perspectives

The use of instrumental analytical techniques alone and especially photometric detection techniques will underestimate antibacterial-like activities of FQEMs. Moreover, the extraction technique(s) and the selected toxicological endpoint(s) require careful consideration when assessing bioactivity. It is therefore recommended that instrumental analytical techniques and several bioautography assays be performed concurrently, and bioautography assays should use a variety of reporter organisms. Two types of bacterial growth bioassays are recommended in any assessment of antibacterial-like activity derived from CF (and possibly from other FQs). A standardized E. coli bioassay should be used as a general screening procedure to facilitate intra- and inter-laboratory exchange of data. Additionally, soil-specific (region-specific) growth inhibition bioassays should be undertaken using several species of endemic soil bacteria. It is likely that the two sets of data will be useful in future risk assessment processes.