Single and joint effects of acetochlor and urea on earthworm Esisenia foelide populations in phaiozem

Much attention is paid to soil health and environmental safety. Earthworms are an important indicator of soil ecosystem health and safety. Ecological toxicity of acetochlor and excessive urea, in both their single and joint effects, on earthworm Esisenia foelide was thus studied using the soil-culture method. Acetochlor had an enhanced toxicity from low concentration to high concentration. The mortality of earthworms after a 6-day exposure was changed from 0 to 86.7%, and the weight change rate ranged from 7.86 to -30.43%, when the concentration of acetochlor was increased from 164 to 730 mg kg(-1). Urea expressed its positive and beneficial effects on earthworms when its concentration was lower than 500 mg kg(-1). Strongly toxic effects took place when the concentration of urea was higher than 1000 mg kg(-1). The mortality of earthworms exposed to urea reached 100% when its concentration was more than 1500 mg kg(-1). When the concentration of urea was lower than 500 mg kg(-1), there were antagonistic effects between the two agrochemicals on earthworms; when the concentration of urea was higher than 500 mg kg(-1), joint toxic effects of acetochlor and excessive urea on earthworms were synergic. In any case, excessive urea application is very harmful to the health of soil ecosystems.     

灾害医学救援中伤病员分类工作研究

灾害条件下的医学救援,要及时准确地处理大批伤病员,首先需要迅速实施伤病员分类。目前,除军队医疗机构外,其他实施灾害医学救援的各级救治机构,都还没有真正建立健全伤员分类组织,应引起重视。各级参加灾害医学救援的医疗救治机构,都应成立有经验的医疗技术人员或管理人员组成的分类组;制定出分类标准;制备分类标志和加强分类训练。做到伤病员分类迅速准确,保证救治和后送工作的顺利进行。     

Influence of hydrogeochemical processes on zero-valent iron reactive barrier performance: a field investigation

Geochemical and mineralogical changes were evaluated at a field Fe0-PRB at the Oak Ridge Y-12 site concerning operation performance during the treatment of U in high NO3- groundwater. In the 5-year study period, the Fe0 remained reactive as shown in pore-water monitoring data, where increases in pH and the removal of certain ionic species persisted. However, coring revealed varying degrees of cementation. After 3.8-year treatment, porosity reduction of up to 41.7% was obtained from mineralogical analysis on core samples collected at the upgradient gravel-Fe0 interface. Elsewhere, Fe0 filings were loose with some cementation. Fe0 corrosion and pore volume reduction at this site are more severe due to the presence of NO3- at a high level. Tracer tests indicate that hydraulic performance deteriorated: the flow distribution was heterogeneous and under the influence of interfacial cementation a large portion of water was diverted around the Fe0 and transported outside the PRB. Based on the equilibrium reductions of NO3- and SO4(2-) by Fe0 and mineral precipitation, geochemical modeling predicted a maximum of 49% porosity loss for 5 years of operation. Additionally, modeling showed a spatial distribution of mineral precipitate volumes, with the maximum advancing from the interface toward downgradient with time. This study suggests that water quality monitoring, coupled with hydraulic monitoring and geochemical modeling, can provide a low-cost method for assessing PRB performance.     

超临界络合萃取铅的研究进展

本文综述了超临界络合萃取铅的研究进展 ,介绍了几类络合剂 ,以及温度、压力和基质及基质修饰剂等因素对萃取效率的影响。     

The effect of diesel fuel sulfur content on particulate matter emissions for a nonroad diesel generator

The effect of sulfur content on diesel particulate matter (DPM) emissions was studied using a diesel generator (Generac Model SD080, rated at 80 kW) as the emission source to simulate nonroad diesel emissions. A load simulator was used to apply loads to the generator at 0, 25, 50, and 75 kW, respectively. Three diesel fuels containing 500, 2100, and 3700 ppm sulfur by weight were selected as generator fuels. The U.S. Environmental Protection Agency sampling Method 5 "Determination of Particulate Matter Emissions from Stationary Sources" together with Method 1A "Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts" was adopted as a reference method for measurement of the exhaust gas flow rate and DPM mass concentration. The effects of various parameters on DPM concentration have been studied, such as fuel sulfur contents, engine loads, and fuel usage rates. The increase of average DPM concentrations from 3.9 mg/Nm3 (n cubic meter) at 0 kW to 36.8 mg/Nm3 at 75 kW is strongly correlated with the increase of applied loads and sulfur content in the diesel fuel, whereas the fuel consumption rates are only a function of applied loads. An empirical correlation for estimating DPM concentration is obtained when fuel sulfur content and engine loads are known for these types of generators: Y = Zm(alphaX + beta), where Y is the DPM concentration, mg/m3, Z is the fuel sulfur content, ppm(w) (limited to 500-3700 ppm(w)), X is the applied load, kW, m is the constant, 0.407, alpha and beta are the numerical coefficients, 0.0118 +/- 0.0028 (95% confidence interval) and 0.4535 +/- 0.1288 (95% confidence interval), respectively.     

Investigation on the influence of methanol on adsorption and leaching of pesticides with soil column liquid chromatography

The effect of methanol of low concentration on adsorption and leaching of atrazine and tebuconazole was studied in this paper. The adsorption coefficients and the retardation factors (R^m) of pesticides on EUROSOIL 3# log-linearly decreased as volumetric fraction of methanol (f^c) was increased in the binary solvent mixtures of methanol and water. These data are consistent with solvophobic theory formerly outlined for describing the adsorption and transport of hydrophobic organic chemicals from mixed solvents. Nevertheless, the adsorption of these pesticides in soil–water system slightly increased when the soil was pre-washed with methanol in comparison with that pre-washed with water (pure water system). Furthermore, their adsorption coefficients were still higher in binary solvent systems with methanol of very low concentrations, i.e. f^c<0.03 for atrazine and f^c<0.01 for tebuconazole, than those in pure water system. The adsorption coefficients (logK^w) of atrazine and tebuconazole predicted by solvophobic theory were 0.5792 and 1.6525, respectively, and their experimental logK^w were 0.3701 and 1.6275 in pure water system. Obviously, the predicted logK^w of the two pesticides was higher than the experimental log K^w in pure water system. The predicted K^w and the retardation factor (R^w) in pure water system by solvophobic theory are thus possibly inaccurate.     

EMERGY analysis for sustainability evaluation of the Baiyangdian wetland ecosystem in China

This study presents a quantitative and ecological benefit evaluation of the Baiyangdian wetland in China between the years 2000 and 2006. Methods of EMERGY analysis were applied to illustrate the wetland ecosystem, to evaluate the economic and environmental inputs and consequent yields, and to assess the sustainability of the Baiyangdian wetland. The indicators for the integrated ecological and economic system, such as EMERGY yield ratio (EYR) (7.51), EMERGY investment ratio (EIR) (4.52), environmental loading ratio (ELR) (2.92), EMERGY exchange ratio (0.41), and EMERGY sustainable indicator (ESI) (2.57) were calculated, compared, analyzed, and discussed. The non-renewable investment in Baiyangdian was greater than renewable investment, leading to the unsustainable development of the system. High EYR indicated that the Baiyangdian integrated system had created huge profits for its people, while ELR and ESI revealed that human behavior has been a heavy burden on the environment, and countermeasures should be taken by the Chinese government to relieve and resolve these problems. Potential management methods were also proposed in this paper.     

A mini-microbial fuel cell for voltage testing of exoelectrogenic bacteria

Current methods for testing the electricity generation capacity of isolates are time- and labor-consuming. This paper presents a rapid voltage testing system of exoelectrogenic bacteria called Quickscreen, which is based on a microliter microbial fuel cell (MFC). Geobacter sulfurreducens and Shewanella baltica were used as the model exoelectrogenic bacteria; Escherichia coli that cannot generate electricity was used as a negative control. It was found that the electricity generation capacity of the isolates could be determined within about five hours by using Quickscreen, and that its time was relatively rapid compared with the time needed by using larger MFCs. A parallel, stable, and low background voltage was achieved using titanium as a current collector in the blank run. The external resistance had little impact on the blank run during the initial period. The cathode with a five-hole configuration, used to hydrate the carbon cathode, gave higher cathode potential than that with a one-hole configuration. Steady discharge and current interrupt methods showed that the anode mostly contributed to the large internal resistance of the Quickscreen system. However, the addition of graphite felt decreased the resistance from 18 to 5 kΩ. This device was proved to be useful to rapidly evaluate the electricity generation capacity of different bacteria.