城市生活污水处理后回用作热电厂循环冷却水的可行性研究

选用适合热电厂特点的水处理剂，利用静态试验。动态模拟试验手段，对城市生活污水回用于热电厂循环冷却水系统中的复配药剂的阻垢缓蚀性能进行了研究。通过试验表明。污水回用是可行的，为城市生活污水回用于热电厂循环冷却水系统工程提供了可靠的参数。     

天津市医疗废物处置规划及策略研究

以天津市医疗废物管理现状为研究对象，对处置方式进行深入探讨，分析目前分散处置和集中处置存在的缺陷，提出“区域集中处置”设想；并运用模糊决策模型理论，建立较完善的处置方式评价指标体系，应用模糊综合评价模型得出“区域集中处置”是最佳的医疗废物处置方式，同时提出了相应的区域集中处置策略。     

MnO2负载树脂的制备及对As（V）的去除效果

制备了大孔和DH302 2种MnO2的负载树脂。并用SEM、EDS手段表征了负载树脂，实验了负载MnO2后树脂对As（V）的去除效果。结果表明：负载树脂对As（V）的去除效果比原树脂有很大提高；吸附As（V）后的2种负载树脂，均能较好地解吸并可重新用于对As（V）的吸附实验。     

Photocatalytic activity of TiO2 films grown on different substrates

Titanium dioxide films were prepared on glass, indium-tin oxide (ITO) glass and p-type monocrystalline silicon and studied for the photocatalytic degradation of rhodamine B in an aqueous medium. Raman, AFM, and XPS spectroscopic investigations of these films indicated that microstructure of titanium oxide films were greatly affected by the substrate materials. Rutile was confirmed to be easily formed on the surface of ITO glass, and TiO2 tended to grow as closely packed particles that were elongated strips with an average size of 20 nm, and had lovely contrast with the perfectly round particles grown on p-type monocrystalline silicon. Charge transfer between the film and silicon substrate was verified by surface photovoltage spectra. This may be the real reason why the films grown on ITO glass and silicon substrates exhibit higher photocatalytic reactivity than the film on glass substrate. Moreover, the different surface properties also seem to be responsible for the different activity.     

The effect of diesel fuel sulfur content on particulate matter emissions for a nonroad diesel generator

The effect of sulfur content on diesel particulate matter (DPM) emissions was studied using a diesel generator (Generac Model SD080, rated at 80 kW) as the emission source to simulate nonroad diesel emissions. A load simulator was used to apply loads to the generator at 0, 25, 50, and 75 kW, respectively. Three diesel fuels containing 500, 2100, and 3700 ppm sulfur by weight were selected as generator fuels. The U.S. Environmental Protection Agency sampling Method 5 "Determination of Particulate Matter Emissions from Stationary Sources" together with Method 1A "Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts" was adopted as a reference method for measurement of the exhaust gas flow rate and DPM mass concentration. The effects of various parameters on DPM concentration have been studied, such as fuel sulfur contents, engine loads, and fuel usage rates. The increase of average DPM concentrations from 3.9 mg/Nm3 (n cubic meter) at 0 kW to 36.8 mg/Nm3 at 75 kW is strongly correlated with the increase of applied loads and sulfur content in the diesel fuel, whereas the fuel consumption rates are only a function of applied loads. An empirical correlation for estimating DPM concentration is obtained when fuel sulfur content and engine loads are known for these types of generators: Y = Zm(alphaX + beta), where Y is the DPM concentration, mg/m3, Z is the fuel sulfur content, ppm(w) (limited to 500-3700 ppm(w)), X is the applied load, kW, m is the constant, 0.407, alpha and beta are the numerical coefficients, 0.0118 +/- 0.0028 (95% confidence interval) and 0.4535 +/- 0.1288 (95% confidence interval), respectively.     

Investigation on the influence of methanol on adsorption and leaching of pesticides with soil column liquid chromatography

The effect of methanol of low concentration on adsorption and leaching of atrazine and tebuconazole was studied in this paper. The adsorption coefficients and the retardation factors (R^m) of pesticides on EUROSOIL 3# log-linearly decreased as volumetric fraction of methanol (f^c) was increased in the binary solvent mixtures of methanol and water. These data are consistent with solvophobic theory formerly outlined for describing the adsorption and transport of hydrophobic organic chemicals from mixed solvents. Nevertheless, the adsorption of these pesticides in soil–water system slightly increased when the soil was pre-washed with methanol in comparison with that pre-washed with water (pure water system). Furthermore, their adsorption coefficients were still higher in binary solvent systems with methanol of very low concentrations, i.e. f^c<0.03 for atrazine and f^c<0.01 for tebuconazole, than those in pure water system. The adsorption coefficients (logK^w) of atrazine and tebuconazole predicted by solvophobic theory were 0.5792 and 1.6525, respectively, and their experimental logK^w were 0.3701 and 1.6275 in pure water system. Obviously, the predicted logK^w of the two pesticides was higher than the experimental log K^w in pure water system. The predicted K^w and the retardation factor (R^w) in pure water system by solvophobic theory are thus possibly inaccurate.     

城市二级污水灌溉对几种园林植物生长的影响

以新疆乌鲁木齐市东郊七道弯污水处理厂二级出水为研究对象．开展了二级污水对几种园林植物(万寿菊、紫穗槐、高羊茅、早熟禾)生理、生态的影响研究。与对照组相比，结果表明，草坪草、紫穗槐叶绿素含量、净光合速率、地上部分生物量增加。     

利用分子信标和EXO III放大荧光信号快速检测Ag+

设计新型的DNA探针,其主要功能区域包含适配体区域和分子信标互补区域;当无靶标存在时,羧基荧光素（FAM）的荧光被黑洞猝灭基团（BHQ）猝灭,加入靶标后,Ag⁺与适配体区域特异性结合,使得分子信标与其互补区域发生结合,加入EXO Ⅲ后,分子信标被酶解,从而释放Ag⁺/DNA探针复合物用于下一轮反应,同时产生大量的FAM,因此,可以通过荧光的增强来定量检测靶标的含量.评价了该方法的灵敏度和选择性,探究它在实际样品中的表现能力.结果表明,适配体区域与分子信标间隔2个碱基的DNA探针与分子信标结合效果最好,检测的信噪比最大.该方法对Ag⁺的检测最低下限（LOD）为0.1nmol/L,在0.5~200nmol/L范围内,荧光值与靶标浓度成线性关系（R²=0.994）.对实际样品的检测在20~200nmol/L范围内呈线性关系（R²=0.998）,且能很好的从混合样品中区分10nmol/L Ag⁺.该研究建立的快速检测Ag⁺方法具有良好的线性定量能力和操作性能,且灵敏度高、特异性强,可满足现实的需求.     

成都冬季一次持续污染过程气象成因及气溶胶垂直结构和演变特征

基于气溶胶激光雷达观测和环境监测站污染物浓度数据、气象观测资料及HYSPLIT后向轨迹模式,分析了2017年12月中下旬,成都市一次本地积累和沙尘输送影响的持续污染过程中污染物浓度、污染物来源、天气系统和气溶胶消光系数的垂直分布及演变.结果表明:①此次污染过程持续时间长,根据气象条件和主要污染物种类,分为本地污染累积、北方沙尘输送和混合影响3个阶段.②本地污染积累阶段,消光系数垂直分布不均匀,受湿度、太阳辐照与逆温层等气象因子的影响,垂直结构变化较大.消光系数最大值多出现在250 m附近,此阶段退偏比数值很小.③沙尘影响阶段,消光系数较前期明显下降,高值区位于250 m及2 km处.退偏比显示沙尘粒子于29日午后开始逐渐抵达成都市2 km高空,并于夜间达到峰值.退偏比相较本地污染累积阶段明显增大,各时段退偏比结构类似,近地面数值略低于高空.④混合影响阶段,消光系数强度小幅回升,退偏比显示有部分沙尘粒子漂浮在1～2 km高度上.