Two-phase jet releases,droplet dispersion and rainout,II. Rainout experiments

This paper describes the results of the first experimental stage of Phase IV of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The objective of this stage of the JIP was to generate experimental rainout data for non-flashing water and xylene experiments. See the overview companion paper I for a wider overview of the problem, model implementation and associated model validation.A range of orifice sizes (2.5 and 5 mm) and stagnation pressures (4–16 barg) were applied. Measurements included flow rate, initial droplet size, plume concentrations/temperatures for a range of downstream locations, and distributed rainout.Instead of the Phase Doppler Anemometry method used for droplet size measurements earlier in the JIP, a photographic technique was applied in an attempt to include measurement of the larger (non-spherical) droplets. This enabled a more accurate evaluation of the initial droplet size distribution and a much clearer understanding of the droplet morphology. The results showed that the droplet behaviour in the jet is more complex than had been anticipated with the mass distribution dominated by a very small number of large non-spherical droplets. Consequently a large number of spray images were required to evaluate an accurate size distribution.Distributed rainout was measured by weighing the amount of rainout in trays positioned along the jet direction. The rainout results showed a good degree of repeatability and internal consistency. They indicated that an increasing proportion of the released material did not rainout for increasing pressure. Rainout distance also increased with increasing pressure. Evaporation of the liquid was confirmed by temperature measurements, which showed the effect of evaporative cooling.Xylene concentration measurements (up to 1%) were carried out using a direct reading photoionization detector calibrated for xylene (measuring vapour only). For a limited dataset, the accuracy of these measurements was estimated by means of comparison against an alternative more time-consuming concentration method (xylene absorption onto a charcoal filter; measuring both vapour and liquid). The concentration measurements displayed several consistent qualitative features. For example, at a given downstream distance, the peak concentration increases with increasing pressure and nozzle diameter and the vertical height at which the peak is achieved increases. The cross-stream profiles displayed a consistent tendency to increased concentration at the edge of the jet, and the reason for this has not been established.Finally recommendations are provided for potential future work.     

Quantitative risk analysis of urban natural gas pipeline networks using geographical information systems

This paper presents a novel quantitative risk analysis process for urban natural gas pipeline networks using geographical information systems (GIS). The process incorporates an assessment of failure rates of integrated pipeline networks, a quantitative analysis model of accident consequences, and assessments of individual and societal risks. Firstly, the failure rates of the pipeline network are calculated using empirical formulas influenced by parameters such as external interference, corrosion, construction defects, and ground movements. Secondly, the impacts of accidents due to gas leakage, diffusion, fires, and explosions are analyzed by calculating the area influenced by poisoning, burns, and deaths. Lastly, based on the previous analyses, individual risks and social risks are calculated. The application of GIS technology helps strengthen the quantitative risk analysis (QRA) model and allows construction of a QRA system for urban gas pipeline networks that can aid pipeline management staff in demarcating high risk areas requiring more frequent inspections.     

Acoustic detection technology for gas pipeline leakage

Gas leakage from pipeline leads to significant environmental damages and industrial hazards, so small leakage detection for gas pipeline is essential to avoid these serious leakages. However, because of the high frequency component of leakage signal attenuates quickly, traditional detection method which inspects pressure or vibration signal has problem to get effective information from leakage signal. So, a novel detection method based on acoustic wave is proposed. This paper, firstly, researches on the phonation principle of pipeline leakage and the characteristic of sound source, and simulates the leakage acoustic field on the basis of aero acoustics. Secondly, using Wavelet Packet Transform method and Fuzzy Support Vector Machine pattern classification, the laboratory testing for identifying acoustic signal of gas pipeline leakage is presented. Finally, the field application demonstrates that the detection system could identify small gas leakage effectively and avoids false-alarms which caused by running conditions with a good prospect.     

Environmental risk mapping of accidental pollution and its zonal prevention in a city

Accidental releases of pollution can have severe environmental, societal, economic, and institutional consequences. This paper considers the use of risk mapping of accidental pollution events, and zonal prevention measures for alleviating the impact on large urban areas. An Environmental Pollution Accident Risk Mapping (EPARM) model is constructed according to a mapping index system supported by quantitative sub-models dedicated to evaluating the risk arising from different sources of potential accidental pollution. The EPARM approach consists of identifying suitable indexes, assessment of environmental risk at regional and national scales based on information on previous pollution accidents and the prevailing environmental and social conditions, and use of GIS to map the overall risk. A case study of pollution accidents in Minghang District, Shanghai, China is used to demonstrate the effectiveness of the model. The paper also proposes a systemic framework for accidental environmental pollution risk prevention, and detailed countermeasures for specific risk zones.     

过去两千年长江干流历史洪水事件的时空变化研究

理解极端洪水事件活动特征及其与气候变化、人类活动的相互关系一直是全球变化研究的热点问题。现代器测数据较短对洪水事件变化规律预测存在不足,而利用历史文献记录研究百年-千年尺度洪水事件的发生规律则成为一个较好的选择。洪水灾害是长江流域最为严重的自然灾害之一。本文以官方现存历史记载为依据,构建了过去2000年长江干流上、中、下游洪水事件序列,并将其与气候和人类活动代理指标进行对比。结果表明,1350年之前,长江干流洪水事件受东亚季风(EASM)、西南季风(ISM)、厄尔尼诺-南方涛动(ENSO)、热带辐合带(ITCZ)移动等多种气候因素驱动,且气候驱动机制在同期不同区、同区不同期存在显著差异。此外,1350年之后人类活动的增强可能明显加剧了长江干流洪水事件的频率和强度。     

滇池流域水资源综合平衡管理研究

随着滇池治理的进展,在今后一个时期内,恢复滇池饮用水环境功能,成为滇池治理的首要目标和任务。围绕滇池流域水资源供求平衡,采用水资源全要素配置框架下的三次平衡分析理论,从整体上分析了滇池流域水资源供求平衡关系及存在的主要问题,提出了以需求为导向,建立滇池流域水资源综合平衡管理目标和措施。分析表明：在滇池治理的基础上,通过建立滇池流域水资源综合平衡管理体系,落实管理措施,从总量平衡的理论上能够充分发挥引水工程的作用,恢复滇池饮用水环境功能,实现水量、水质供求的综合平衡。建议进一步开展量化分析和模拟实验研究,为在滇池流域实施综合平衡管理提供可靠依据和建议     

宁夏总量减排与环境质量改善的相关性分析

利用SPSS统计软件分析宁夏“十一五”期间主要污染物总量控制指标与环境质量数据的关联程度,并建立回归模型.结果表明:宁夏总量减排与环境质量改善存在高度关联,拟合曲线均为一元线性回归曲线.随着SO2排放总量降低,重点城市空气质量稳步改善,两者呈现同向变化的趋势;随着COD排放总量降低,黄河宁夏段水环境质量稳步改善,两者亦呈现同向变化的趋势.宁夏总量减排在环境质量改善上成效已显现,污染防治政策较为成功,环保成绩显著.     

长三角典型村域次降雨条件下氮素非点源输出特征

研究长三角典型都市农业村镇不同土地利用下的氮素非点源输出特征,以期为治理该区域的面源污染提供科学依据.通过典型次降雨径流事件中氮形态和输出负荷变化的研究发现:监测点总氮(TN)的事件平均浓度(EMC)为20.01～22.83mg/L,其中溶解态氮(DN)占TN的比例最大;研究区非点源氮流失以溶解态为主,DN又以溶解态有机氮(DON)为主.耦合各形态氮浓度与径流量特征,发现非点源氮素输出呈现2个峰值,且出现在径流峰值之前4～55min;TN、DN和硝态氮(NO3--N)浓度随降雨时间增加呈现减少趋势;氮素负荷受其浓度和径流量的共同作用,基本上呈现与氮素浓度相同的变化特征,但起伏变化较为平缓.氮素污染负荷积累曲线分析表明,村域地表径流各形态氮素均存在初期冲刷效应.     

Microbial reduction of uranium (VI) by Bacillus sp. dwc-2: A macroscopic and spectroscopic study

The microbial reduction of U(VI) by Bacillus sp. dwc-2, isolated from soil in Southwest China, was explored using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption near edge spectroscopy (XANES). Our studies indicated that approximately 16.0% of U(VI) at an initial concentration of 100 mg/L uranium nitrate could be reduced by Bacillus sp. dwc-2 at pH 8.2 under anaerobic conditions at room temperature. Additionally, natural organic matter (NOM) played an important role in enhancing the bioreduction of U(VI) by Bacillus sp. dwc-2. XPS results demonstrated that the uranium presented mixed valence states (U(VI) and U(IV)) after bioreduction, which was subsequently confirmed by XANES. Furthermore, the TEM and high resolution transmission electron microscopy (HRTEM) analysis suggested that the reduced uranium was bioaccumulated mainly within the cell and as a crystalline structure on the cell wall. These observations implied that the reduction of uranium may have a significant effect on its fate in the soil environment in which these bacterial strains occur.