环磷酰胺等三种化学物诱发褐斑大蠊染色体畸变分析

染色体的畸变分析是一种简便易行,经济的遗传毒理学方法,可用来探讨诱变物对生物遗传系统的影响。目前人们多利用鼠类、赤麂及人的培养细胞来进行染色体畸变分析,其它材料很少见,蜚蠊(俗称蟑螂)是一种重要的卫生昆虫,也是一种较好的遗传学研究材料,其分布广泛,与人的日常生活环境密切相关,能否利用它作为一种污染的监测因子呢?我们利用褐斑大蠊(Periplaneta brunnea,Burmeister 1838)进行了初步尝试。     

一种新型烟气脱硫技术在燃煤锅炉上的扩大试验

介绍了用硫化碱加TFS添加剂进行燃煤锅炉煤气脱硫并副产硫代硫酸钠的中试成果。     

Transport modeling of copper and cadmium with linear and nonlinear retardation factors

The predictive accuracy of using the one-dimensional advection–dispersion equation to evaluate the fate and transport of solute in a soil column is usually dependent on the proper determination of chemical retardation factors. Typically, the distribution coefficient (K_d) obtained by fitting the linear sorption isotherm has been extensively used to consider general geochemical reactions on solute transport in a low-concentration range. However, the linear distribution coefficient cannot be adequately utilized to describe the solute fate at a higher concentration level. This study employed the nonlinear equilibrium-controlled sorption parameters to determine the retardation factor used in column leaching experiments. Copper and cadmium transportation in a lateritic silty-clay soil column was examined. Through the explicit finite-difference calculations with a third-order total-variation-diminishing (TVD) numerical solution scheme, all results of the theoretical copper and cadmium breakthrough curves (BTCs) simulated by using the Freundlich nonlinear retardation factors revealed good agreement with the experimental observations.     

Determination of source contributions to ambient PM2.5 in Kaohsiung, Taiwan, using a receptor model

Ambient particulates of PM2.5 were sampled at three sites in Kaohsiung, Taiwan, during February and March 1999. In addition, resuspended PM2.5 collected from traffic tunnels, paved roads, fly ash of a municipal solid waste (MSW) incinerator, and seawater was obtained. All the samples were analyzed for twenty constituents, including water-soluble ions, organic carbon (OC), elemental carbon (EC), and metallic elements. In conjunction with local source profiles and the source profiles in the model library SPECIATE EPA, the receptor model based on chemical mass balance (CMB) was then applied to determine the source contributions to ambient PM2.5. The mean concentration of ambient PM2.5 was 42.69-53.68 micrograms/m3 for the sampling period. The abundant species in ambient PM2.5 in the mass fraction for three sites were OC (12.7-14.2%), SO4(2-) (12.8-15.1%), NO3- (8.1-10.3%), NH4+ (6.7-7.5%), and EC (5.3-8.5%). Results of CMB modeling show that major pollution sources for ambient PM2.5 are traffic exhaust (18-54%), secondary aerosols (30-41% from SO4(2-) and NO3-), and outdoor burning of agriculture wastes (13-17%).     

Heavy metal retention and partitioning in a large-scale soil-aquifer treatment (SAT) system used for wastewater reclamation

Soil aquifer treatment (SAT) of wastewater relies on extensive biogeochemical processes in the soil and aquifer to achieve large-scale and economic reclamation of municipal effluents. Removal of trace metals from the wastewater is a prime objective in the operation, but the long-term sustainability of the adsorptive filtration capacity of the soils is an open question. Solid/solution partitioning (measured by the distribution coefficient, K(d)) and solid/solid partitioning (measured by selective sequential dissolution, SSD) of heavy metals were measured in soils sampled from active recharge basins in a wastewater reclamation plant and were compared to the adjacent pristine dune. K(d) values for the adsorption of Cu, Ni and Zn, measured in short-term adsorption experiments positively and significantly correlated with solution pH. Quantitative estimation of Cu, Ni and Zn adsorption on multi-sorbents indicated that surface adsorption and precipitation on Fe oxides and/or carbonate may be the major mechanisms of metal retention in these soils. SSD analyses of metal partitioning in soils exposed to approximately 20yr of effluent recharge showed that all solid-phase components, including the most stable 'residual' component, competed for and retained added Cu and Zn. Copper preferentially partitioned into the oxide component (32.0% of the soil-accumulated metal) while Zn preferentially partitioned into the carbonate component (51.6% of the soil-accumulated metal).     

臭氧-曝气生物滤池处理酸性玫瑰红染料废水

在实验室配制含酸性玫瑰红染料的印染废水，采用臭氧氧化-曝气生物滤池工艺开展处理试验。试验运行结果表明，臭氧氧化处理能提高模拟废水的可生化性，BOD／COD值由原水的0．18上升到0．36。经组合工艺处理后出水COD〈40mg／L，色度40倍以下，SS约50mg／L，处理效果良好。     

Prevalence and Bayesian Phylogenetics of Enteroviruses Derived From Environmental Surveillance Around Polio Vaccine Switch Period in Shandong Province,China

Food and Environmental Virology - We present the results of environmental surveillance for poliovirus (PV) and non-poliovirus (NPEV) around the switch from trivalent to bivalent oral polio-vaccine...     

1株耐盐异养硝化-好氧反硝化菌Zobellella sp.B307的分离及脱氮特性

从胶州湾沉积物中分离出1株异养硝化-好氧反硝化菌株B307,采用16S rRNA基因序列分析对该菌株进行鉴定,采用单因素实验对其进行条件优化和耐盐特性研究,并在最优条件下考察其在单一和混合氮源中的脱氮效果.结果表明,该菌为Zobellella sp.,其最佳碳源为丁二酸钠,最适C/N为5,最适初始p H为9,最适温度为35~40℃.该菌株在混合氮源体系中12 h对NH_4~+-N和NO_3~--N的去除率分别为98.35%和99.75%;在盐度为75 g·L~(-1)(以NaCl计)条件下24 h对NH_4~+-N和NO_3~--N去除率仍分别保持在97.67%和94.39%.表明该菌株具有高效的异养硝化-好氧反硝化能力和较强的耐盐特性,在高盐废水脱氮等领域具有广泛的应用前景.     

阴山北麓草原生态功能区防风固沙服务受益范围识别

风蚀是北方干旱与半干旱农牧交错带面临的严峻问题。论文以阴山北麓草原生态功能区为例,利用HYSPLIT模型模拟了当地生态系统提供的防风固沙服务流动路径,通过空间插值获得了功能区防风固沙服务的受益范围及其获得效益的相对大小,确定了受益范围内的土地覆被、受益人口及GDP。研究结果显示：1）2010年阴山北麓草原生态功能区的防风固沙服务大部分发生在春季,其流动路径主要往功能区东部和东南部区域延伸;2）防风固沙受益土地面积占全国土地面积的46%,主要位于功能区东部和南部地区;3）功能区受益的人口占当年全国总人口的75%,受益GDP占当年全国GDP总量的67%。未来可以根据受益区获得防风固沙效益的相对大小确定受益区不同区域横向生态付费金额,以补偿当地采取防风固沙措施导致的经济损失和投入,实现地区间公平,促进区域可持续发展。     

Performance and mechanism of Cr(VI) removal by zero-valent iron loaded onto expanded graphite

Zero-valent iron (ZVI) was loaded on expanded graphite (EG) to produce a composite material (EG-ZVI) for efficient removal of hexavalent chromium (Cr(VI)). EG and EG-ZVI were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and Brunauer–Emmett–Teller (BET) analysis. EG-ZVI had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr(VI) removal performance. The results showed that the Cr(VI) removal rate was 98.80% for EG-ZVI, which was higher than that for both EG (10.00%) and ZVI (29.80%). Furthermore, the removal rate of Cr(VI) by EG-ZVI showed little dependence on solution pH within a pH range of 1–9. Even at pH 11, a Cr(VI) removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZVI could enhance the removal of Cr(VI) via chemical reduction and physical adsorption, respectively. X-ray photoelectron spectroscopy (XPS) was used to analyze the mechanisms of Cr(VI) removal, which indicated that the ZVI loaded on the surface was oxidized, and the removed Cr(VI) was immobilized via the formation of Cr(III) hydroxide and Cr(III)–Fe(III) hydroxide/oxyhydroxide on the surface of EG-ZVI.