印染废水生物强化处理技术研究进展

印染废水是国内外公认的难处理的工业废水之一 ,活性污泥法是目前最常用的处理方法 ,但还存在诸多问题。在分析中 ,主要从生物强化技术、固定化微生物技术和微生物活性增加技术等方面 ,总结了废水生物处理技术强化研究进展 ,并讨论了今后的研究方向。     

Progress in developing an ANN model for air pollution index forecast

An air pollution index (API) reporting system is introduced to selected cities of China for public communication on air quality data. Shanghai is the first city in China providing daily average API reports and forecasts. This paper describes the development of an artificial neural network (ANN) model for the API forecasting in Shanghai. It is a multiple layer perceptron (MLP) network, with meteorological forecasting data as the main input, to output the next day average API values. However, the initial version of the MLP model did not work well. To improve the model, a series of tests were conducted with respect to the training method and structure optimization. Based on the test results, the training algorithm was modified and a new model was built. The new model is now being used in Shanghai for API forecasting. Its performance is shown reasonably well in comparison with observation. The application of the old model was only weakly correlated with observation. In 1-year application, the correlation coefficients were 0.2314, 0.1022 and 0.1710 for TSP, SO₂ and NO_x, respectively. But for the new model, for over 8 months application, the correlation coefficients are raised to 0.6056, 0.6993 and 0.6300 for PM₁₀, SO₂, and NO₂. Further, the new algorithm does not rely on manpower intervention so that it is now being applied in several other Chinese cities with quite different meteorological conditions. The structure of the model and the application results are presented in this paper and also the problems to be further studied.     

温度对离子液体支撑膜捕集CO2的影响

传统CO2的捕集方法存在设备投资大、环境污染严重、再生能耗高等缺点,利用新型绿色工质离子液体负载于聚偏氟乙烯上制备离子液体支撑膜可以较好地解决该问题。在压力为0.2 MPa、流量为50 mL·min-1、温度在298~318 K范围内变化时,测定了CO2在1-乙基-3甲基咪唑双三氟磺酰亚胺盐（[Emim][Tf2N]）和1-乙基-3-甲基咪唑醋酸盐（[Emim][AC]）2种离子液体支撑膜中的渗透系数、溶解度和扩散系数,采用Van’t Hoff方程对溶解度数据进行关联、Arrhenius方程对渗透和扩散系数的数据进行关联。实验结果表明,CO2在2种离子液体支撑膜中的渗透和扩散系数随着温度的升高而增大,溶解度随着温度的升高而降低。[Emim][Tf2N]离子液体支撑膜对CO2的捕集性能优于[Emim][AC]支撑膜,CO2在[Emim][Tf2N]支撑膜中的溶解度最大值为0.447,在[Emim][AC]离子液体支撑膜中的最大溶解度为0.253,由此可确定离子液体支撑膜分离CO2的最佳工作温度,为其在工业应用中奠定良好的基础。     

采用TSF技术改善电力变压器运行的安全性

分析了无功功率和高次谐波对电力变压器的危害,介绍了晶闸管投切滤波器(TSF)装置的特点、结构原理．提出了TSF装置在工厂实际应用中的主电路结构,操作及控制方案。实践证明,TSF晶闸管投切滤波器装置起到了高效节能、优化电能质量的作用,保证了电网的安全运行。     

天然气全氧燃烧尾气生活垃圾气化热力学分析

基于Aspen Plus模拟平台,运用吉布斯能最小化原理,以天然气全氧燃烧尾气（后续称为烟气）作为气化剂,选取反应温度和烟气流量与生活垃圾量比（E/M）作为影响因素,气化炉温度变化范围为400~1 500℃,E/M范围0~3.0,对几种典型生活垃圾（木屑、纸屑、塑料、橡胶和厨余）气化进行模拟计算。模拟结果表明,以烟气作为生活垃圾气化剂,可制备富氢产品气,产品气为中热值燃气。温度在800℃左右时,H2的体积分数达到峰值46.75%,反应温度大于800℃时,反应温度的增加对提升产品气的热值、CO的含量有一定作用,但H2的含量和产品气产率有所下降,反应温度过高增加气化的能源投入,反应温度应控制在800~1 000℃范围。高温烟气的过量导致产品气热值和品质下降,E/M宜控制在0.4~1.0区间范围。     

Research and application of method of oxygen isotope of inorganic phosphate in Beijing agricultural soils

Phosphorus (P) in agricultural ecosystems is an essential and limited element for plants and microorganisms. However, environmental problems caused by P accumulation as well as by P loss have become more and more serious. Oxygen isotopes of phosphate can trace the sources, migration, and transformation of P in agricultural soils. In order to use the isotopes of phosphate oxygen, appropriate extraction and purification methods for inorganic phosphate from soils are necessary. Here, we combined two different methods to analyze the oxygen isotopic composition of inorganic phosphate (δ¹⁸O_P) from chemical fertilizers and different fractions (Milli-Q water, 0.5 mol L^?1 NaHCO₃ (pH = 8.5), 0.1 mol L^?1 NaOH and 1 mol L^?1 HCl) of agricultural soils from the Beijing area. The δ¹⁸O_P results of the water extracts and NaHCO₃ extracts in most samples were close to the calculated equilibrium value. These phenomena can be explained by rapid P cycling in soils and the influence of chemical fertilizers. The δ¹⁸O_P value of the water extracts and NaHCO₃ extracts in some soil samples below the equilibrium value may be caused by the hydrolysis of organic P fractions mediated by extracellular enzymes. The δ¹⁸O_P values of the NaOH extracts were above the calculated equilibrium value reflecting the balance state between microbial uptake of phosphate and the release of intracellular phosphate back to the soil. The HCl extracts with the lowest δ¹⁸O_P values and highest phosphate concentrations indicated that the HCl fraction was affected by microbial activity. Hence, these δ¹⁸O_p values likely reflected the oxygen isotopic values of the parent materials. The results suggested that phosphate oxygen isotope analyses could be an effective tool in order to trace phosphate sources, transformation processes, and its utilization by microorganisms in agricultural soils.     

紫外-Fenton法处理高盐有机废水

以某电镀厂水回用系统产生的高盐有机废水为对象,对比研究了Fenton、UV-Fenton等工艺去除COD性能,考察了初始pH、H2O2投加量、Fe2+与H2O2摩尔比、反应时间等参数对处理效果的影响。结果表明:UV-Fenton工艺的最佳条件为初始pH=3.0,H2O2的投加量3 mmol/L,RFe2+:H2O2=1:1,反应时间30 min;在此条件下,COD去除率可达到60%以上,分别较Fenton和UV-H2O2工艺提高23.0%和39.3%。UV-Fenton工艺中,Fenton与UV表现出良好的协同效果,其处理效果较单独Fenton和单独UV处理效果之和高14.7%。UV的引入促进Fe(II)/Fe(Ⅲ)循环,可以提高·OH生成量以及Fe2+与H2O2利用率。UV-Fenton是处理高盐有机废水的可行工艺之一。     

电絮凝-超滤除氟工艺参数优化研究

电絮凝-超滤(electrocoagulation-ultrafiltration,EC-UF)工艺在饮用水除氟方面具有良好的应用前景。研究了EC-UF除氟效果和膜污染过程,考察了电流密度、水力停留时间、初始pH、初始氟浓度对除氟效果和膜污染的影响。结果表明,在连续流下EC-UF工艺除氟效果良好,在电流密度30 A/m2、水力停留时间20 min、初始pH在6.0~7.0的最佳工艺条件下,氟的去除率达到80%以上。膜污染主要是由电解过程产生的铝絮凝剂与氟离子形成的颗粒物质导致。上述结果为EC-UF除氟工艺改进提供了参考和依据。     

臭氧对再生水中指示病原微生物的灭活特性

以臭氧投加量(TOD)为臭氧消耗剂量评价指标,研究了北京市某实际再生水中臭氧对大肠杆菌及枯草芽孢的灭活特性,以及消毒过程中臭氧对溶解性有机碳(DOC)、色度、UV254、荧光强度的去除效果。在此基础之上,分析了色度与指示病原微生物灭活特性之间的相关性。结果表明,臭氧对大肠杆菌及枯草芽孢的灭活特性与余臭氧浓度有关。当水中无法检测到余臭氧时,随着TOD的增加,大肠杆菌灭活率增加的速率较慢,TOD增加 3 mg/L,灭活率增加了1.5 log。枯草芽孢则无显著灭活。当水中余臭氧浓度大于0时,大肠杆菌灭活率增加的速率快速提升,TOD增加 3 mg/L,灭活率增加了3 log。枯草芽孢灭活率也随TOD的增加而显著增加。消毒过程中,DOC无显著变化,而臭氧对色度、UV254、三维荧光强度的去除效果显著。当色度随TOD的增加而趋于稳定时,水中余臭氧浓度开始显著上升,预示着指示病原微生物开始进入高效灭活阶段。同时,进水色度越大,指示病原微生物进入高效灭活阶段所需的TOD越大。     

稻壳灰在陶粒烧制中的应用

针对目前每年产生的大量稻壳灰废弃物,本研究提出了利用稻壳灰作为发泡剂来制备多孔陶粒的利用途径。实验表明,对于粘土、建筑垃圾、粉煤灰等陶粒原料,稻壳灰都有很好的发泡效果。利用SEM、XRD等检测分析手段对稻壳灰的发泡机理进行了探讨,并证明了稻壳灰中残余碳化合物和活性硅组分是发泡能力的关键因素。本研究为稻壳灰找到了一种高价值的资源利用方式,同时也为陶粒制备提供了一种高效的发泡剂。