华北山区温度推算模式和应用

利用华北山区气象站观测的温度与其所在纬度、经度和高度，分山区建立宏观地面气温场方程。采用１：２０万地形图，以１０＇经、纬度为步长，判读其高度值，代入已建立好的方程中，经地形项订正，推算华北山区年、月平均温度、年较差和ΣＴ＇≥１０℃，其精度达极显著水平。计算结果使我们对华北山区热量资源有了新的认识，最后求算华北山区的主要水果最优品质种植上限高度。     

温差拉深法在制造大型杯形件中的应用

用温差拉深法制造大型杯形件毛坯,可避免毛坯拉断和起皱,最大限度地降低拉深系数、减少拉深次数、降低加工成本。     

生态工业园区的绿色招商指标体系的研究

生态工业园区是一种以追求更高物质利用率和能量转化效率,更少废物排放甚零排放为目标的企业地域分布形式,环境保护意义和生态绿色概念的工业园区.为了能够获得最大的生态效益,就要从源头开始提高招商引资的质量,制定一个绿色招商的指标体系,设置绿色门槛,把好环保关,为园区的可持续发展奠定良好的基础.     

characteristics of PM2.5 in rural areas of southern Jiangsu Province, China

Introduction Anumberofstudiesabroadhavedemonstratedthat atmosphericfineparticulatematter(PM2.5,dp<2.5μm)is notonlyassociatedwithatmosphericvisibilityreductionbut alsohasaclearcorrelationwiththenumberofdailydeathsandhospitalizationsasaconsequenceofpulmonarydisease(Chan,1997;Christoforous,2000;Schwartz,1996;Wilson,1997).On18July,1997,theU.S.EnvironmentalProtectionAgency(USEPA)promulgatednewandsevere standardsforfineparticulates(PM2.5)withthesizebelow2.5μm(15μg m3asannualaverage,65μg m…     

GJB 150A淋雨试验强化试验程序数值模拟和试验装置设计研究

目的 研究GJB 150.8A—2009《军用装备实验室环境试验方法第8部分:淋雨试验》中强化试验程序的工程实现方法.方法 在标准解读的基础上,以强化试验程序用喷嘴为对象,建立数值模型,分析喷嘴在强化试验程序过程中的流场分布,并基于分析结果给出强化试验程序试验装置设计的思路和方法.结果 在喷嘴内,压力变化剧烈,极短距离内由276 kPa迅速降至101 kPa.水流经过喷嘴经历了激烈的加速过程,从距离喷嘴出口0.01～0.4 m,水流速度从251 m/s迅速降至17.8 m/s,到远场趋于稳定.结论 分析结果对指导强化试验程序的试验装置的设计和试验实施具有重要参考意义.     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.     

Cells of the connective tissue differentiate and migrate into pollen sacs

In angiosperms, archesporial cells in the anther primordium undergo meiosis to form haploid pollen, the sole occupants of anther sacs. Anther sacs are held together by a matrix of parenchyma cells, the connective tissue. Cells of the connective tissue are not known to differentiate. We report the differentiation of parenchyma cells in the connective tissue of two Gordonia species into pollen-like structures (described as pseudopollen), which migrate into the anther sacs before dehiscence. Pollen and pseudopollen were distinguishable by morphology and staining. Pollen were tricolpate to spherical while pseudopollen were less rigid and transparent with a ribbed surface. Both types were different in size, shape, staining and surface architecture. The ratio of the number of pseudopollen to pollen was 1:3. During ontogeny in the connective tissue, neither cell division nor tetrad formation was observed and hence pseudopollen were presumed to be diploid. Only normal pollen germinated on a germination medium. Fixed preparations in time seemed to indicate that pseudopollen migrate from the connective tissue into the anther sac.     

微机上冲裁CAD系统的开发

此文介绍了一套在微机上开发的冲裁CAD系统。它以Foxbase作为数据库管理系统,Trubo C为编程语言,能进行冲裁件图形输入与显示、工艺性分析、优化单排排样和选择板材规格、冲裁件尺寸识别和模具刃口尺寸计算、冲裁力和压力中心计算、以及凹模周界尺寸计算等。本系统主界面为下拉式菜单界面,全中文提示,人机界面友好,具有较好的可扩充性和容错性。     

Ni2+对2-氯酚厌氧降解系统的影响

针对重金属对难降解有毒有机物厌氧降解的影响问题,采用间歇试验法研究Ni2 对2-氯酚(2-CP)厌氧降解系统的影响规律.结果表明,当ρ(Ni2 )＜5 mg/L时,Ni2 对2-CP厌氧降解表现出轻度促进,当ρ(Ni2 )为5～500 mg/L,Ni2 以抑制作用为主,抑制作用随ρ(Ni2 )的增加而增强.Ni2 对原基质及关键中间产物苯酚和苯甲酸的抑制程度表现为:苯酚＞苯甲酸＞2-CP;ρ(Ni2 )低时的驯化能有效提高厌氧污泥对Ni2 毒性的耐受性能,300 mg/L Ni2 对2-CP降解的抑制从驯化前的65%降至驯化后的21%.Ni2 对2-CP厌氧降解的抑制作用与污泥中Ni的截留量之间存在正相关关系.抑制浓度CIP值和方程αC=[1-(I/I*)m]/[1 (I/I*)n)]能较好地表征厌氧生物处理过程受抑制程度.