自来水中痕量挥发性有机物的测定

近十年来,水中污染物的鉴定及分析逐渐引起了人们的重视,BOD、COD及TOC指标的测定只能说明有机污染物的存在,并不能提供关于污染物分子结构特性及其毒性的重要信息.水中原来就不同程度地含有一些有机和无机化合物,经过自来水厂氯化处理后会形成一系列挥发性有机卤化物,其中有些是已知的致癌物.因此,饮用水氯化处理与人体健康的关系受到人们的密切关注,水中痕量有机挥发物的分析已成为环境化学研究中的重大课题之一.填充柱GC/ECD测定法由于柱容量大,而且有较高的分析灵敏度,所以适合水中挥发性卤化物的常规测定,但是对复杂组分的分离不甚理想,     

Practical environmental monitoring of major construction projects

Independent teams undertook environmental monitoring of particular concentrations of major construction projects forming part of Hong Kong’s U.S. $20 billion airport infrastructure programme located in dense urban areas. The team combination of environmental specialists with experienced civil engineers enabled pragmatic mitigation measures to be developed and accepted by the construction personnel with the result that potentially significant adverse impacts were averted. The authors discuss the mechanism and success of this innovative approach.     

Chance-constrained programming (CCP)abatement of SO_2 emission for acid deposition control in Liuzhou City

A deterministic linear programming model which optimizes the abatement of each SO2 emission source, is extended into a CCP form by introducing equations of probabilistic constrained through the incorporation of uncertainty in the source-receptor-specific transfer coefficients. Based on the calculation of SO2 and sulfate average residence time for Liuzhou City, a sulfur deposition model has been developed and the distribution of transfer coefficients have been found to be approximately log-normal. Sulfur removal minimization of the model shows that the abatement of emission sources in the city is more effective, while control cost optimization provides the lowest cost programmes for source abatement at each allowable deposition limit under varied environmental risk levels. Finally a practicable programme is recommended.     

吉林生态省建设规划背景评价的生态足迹分析

生态足迹理论在应用于区域层次时,因为区域进出口数据的不健全,在计算净消费量的过程中往往误差较大,因此,很难真实反映区域环境的压力负荷.所以,本文以区域生产量取代消费量,并用生产性生态足迹作为区域可持续发展的评价指标,对吉林省2002年的生产性生态足迹进行了计算分析.结果表明,吉林省2002年的生物生产发展模式处于一种不可持续的状态,并简要分析了存在生产性生态赤字的原因和消除生态赤字的途径和方法,将为更好的实施生态省建设规划提供一定的科学指导性意见.     

辽宁省机动车污染防治对策探讨

辽宁省机动车保有量大、增长速度快，机动车污染物排放总量不断增加，给城市环境空气质量改善带来巨大压力，本文根据辽宁省机动车污染实际情况，提出了辽宁省机动车污染的防治对策。     

1420Al-Li合金特深模锻件偏心问题分析及对策

对 14 2 0Al Li合金特深模锻件在实际生产 (反挤压 )过程中所产生的偏心问题进行了分析 ,分析表明 ,在上下的方向上 ,润滑不均将使冲头产生弯曲变形和使挤压筒上抬 ,致使锻件产生明显的偏心 ;在左右方向上 ,冲头的轴线相对于挤压筒轴线左偏 ,是产生偏心的主要原因。文中还提出了纠偏的措施。     

An evaluation of quality assurance to monitor acidprecipitation by using ion balancein Guizhou, China

ＡｎｅｖａｌｕａｔｉｏｎｏｆｑｕａｌｉｔｙａｓｓｕｒａｎｃｅｔｏｍｏｎｉｔｏｒａｃｉｄｐｒｅｃｉｐｉｔａｔｉｏｎｂｙｕｓｉｎｇｉｏｎｂａｌａｎｃｅｉｎＧｕｉｚｈｏｕ，ＣｈｉｎａＫａｎｇＤｅｍｅｎｇ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖｉｒ...     

公路的环境美学与景观

公路建设作为人类实践创造活动之一，它为人们所提供的不仅仅是交通便捷与安全的享受，而且还应有视觉上的娱悦和满足。一条公路，可以吸引人们的视觉，也可以使人们熟视无睹。这取决于公路在周围风景中的实际布局及详细设计和维护保养的程度。和谐、连贯、稳定等公路景观评价和设计中常常使用的概念。公路对景观的影响是不可避免的，符合美学原则的减轻措施是公路景观恢复的有效手段。一条精心设计的公路应与周围环境和谐一致，应该充分利用地形和景色，包括一些当地最好的代表植物，使其融入自然。并且在可能的情况下，凭籍自己独到的设计和上乘的品质，使其成为一个旅游观赏景区。     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

制备块体纳米材料的新工艺——等径角挤压

综述了等径角挤压法制备块体纳米材料的发展及其工艺原理 ,并在此基础上论述了等径角挤压材料的微观结构及其应用 ,指出了等径角挤压法目前存在的问题。