基于CA-MAS的水域总有机碳扩散模拟研究

当前水环境污染扩散研究一般基于普通数值模型模拟,忽略了水污染扩散微观驱动力的影响。为能更真实地反映其动态扩散过程,针对水域总有机碳(TOC)扩散机理,基于CA和MAS技术,将影响TOC扩散的自然和社会经济因素抽象为微观的水流Agent、风速Agent、径流量Agent、污水排放口Agent、人工管理Agent以及农业生产地Agent,将研究水域抽象为CA元胞空间,建立了CA-MAS水域总有机碳扩散模型,对水域总有机碳的动态演化过程进行模拟,并以武汉理工大学鉴湖水域作为实验区域,借助NetLogo仿真平台完成了模型的实现与验证。模拟结果表明,该模型基本能够反映水体总有机碳的扩散规律,可以为水环境污染控制提供参考。     

电渗透脱水对污泥热干燥特性的影响

以污水厂机械脱水后的污泥作为研究对象,提出了采用电渗透-热干燥结合进行深度脱水的方法。通过对原泥以及电渗透脱水至不同含水率(67%、71%和76%)的污泥在热干燥过程中含水率和干燥速率的测定,分析电渗透脱水对污泥热干燥特性的改善规律。结果表明,经电渗透脱水至含水率为67%和71%的污泥在热干燥过程中的传热传质速率及干燥速率有明显提高,且干燥温度越高,电渗透后污泥的干燥速率与原泥的干燥速率差距越大。相同电压梯度及相同温度下电渗透至67%后进行热干燥耗能最少。实际应用中应结合能耗分析选择合适的电渗透程度及干燥温度,以达到最优效果。     

微波再生载苯酚活性炭过程中再生产物分析

研究了载氮气和无载气2种条件下,微波再生载苯酚活性炭过程中再生产物的成分和苯酚随再生过程的去向分布。结果表明,无载气时,微波功率越高,再生反应器内温度越高,吸附质的高温裂解反应越彻底,再生产物以挥发性气体为主,有机质种类很少;而当微波功率较低或载氮气再生时,反应器内温度相对较低,苯酚难以被彻底分解,再生产物中含多种复杂的链状或环状有机物。此外,载氮气时,经气提、挥发而去除的苯酚量约占总吸附量的一半,再生炭上无苯酚残留,活性炭吸附性能可完全恢复乃至优化;无载气时,经挥发而去除的苯酚量只有19.9%,其余大量苯酚则在微波作用下裂解或缩合为其他物质随尾气而去除,且再生炭上仍有少量苯酚未被解吸出来。因此,前者活性炭再生的效果优于后者。     

降解SO2功能菌的16S rRAN基因测序及降解特性

用低浓度SO2诱导驯化方法获得高效脱硫菌群,并用分离培养与16S rRNA基因测序技术相结合的方法鉴定菌群种属,分析驯化过程中种群结构的动态变化,同时研究分离纯菌种的脱硫性能。结果表明,从诱导驯化7 d和14 d菌液中分别分离出23株菌和22株菌,16S rRNA序列分析发现这些菌归属于13个种,其中有6个种(Rhodococcus erythropolis、Pseudomonas putida、Microbacterium oxydans、Sphingomonas koreensis、Acinetobacter junii、Acinetobacter johnsonii)对SO2-3有较强的降解能力,并在持续驯化过程中稳定的生长传代,降解产物以硫酸根为主,还有极少量的单质硫。与含混合菌的驯化菌液降解SO2-3的能力相比,单一脱硫菌的脱硫性能较弱。脱硫功能菌株及其基本特性的研究为微生物处理SO2烟气提供了丰富的菌源信息和理论基础。     

厌氧系统中碱处理对污泥减量的影响

碱解预处理污泥和原污泥按一定比例进行混合后,投入厌氧反应器中进行消化,研究其对污泥减量化的影响。结果表明,该处理既可以提高污泥减量率,又能改善污泥厌氧消化性能,提高污泥产气量。当碱处理污泥和原污泥混合比为1∶3时,在混合初期由于稀释作用和水解中和作用,溶液的pH能迅速恢复到中性。SS减少48%,较对照组提高了10%;SCOD减少约80%,较对照组提高20%,而空白对照组因未发生溶胞作用,各参数值均处于较低水平,降解率也维持在较低水平。     

Inorganic Acid Emission Factors of Semiconductor Manufacturing Processes

Abstract

A huge amount of inorganic acids can be produced and emitted with waste gases from integrated circuit manufacturing processes such as cleaning and etching. Emission of inorganic acids from selected semiconductor factories was measured in this study. The sampling of the inorganic acids was based on the porous metal denuders, and samples were then analyzed by ion chromatography. The amount of chemical usage was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County according to the Taiwan Environmental Protection Agency regulation. The emission factor is defined as the emission rate (kg/month) divided by the amount of chemical usage (L/month). Emission factors of three inorganic acids (i.e., hydrofluoric acid [HF], hydrochloric acid [HQ], and sulfuric acid [H₂SO₄]) were estimated by the same method. The emission factors of HF and HCl were determined to be 0.0075 kg/L (coefficient of variation [CV] = 60.7%, n = 80) and 0.0096 kg/L (CV = 68.2%, n = 91), respectively. Linear regression equations are proposed to fit the data with correlation coefficient square (R²) = 0.82 and 0.9, respectively. The emission factor of H₂SO₄, which is in the droplet form, was determined to be 0.0016 kg/L (CV = 99.2%, n = 107), and its R² was 0.84. The emission profiles of gaseous inorganic acids show that HF is the dominant chemical in most of the fabricators.     

Decomposition of Gas Phase 1,3-Butadiene by Ultraviolet/Ozone Process

Abstract

A pilot-scale plug-flow reactor was built to investigate its performance in treating airborne 1,3-butadiene (BD) via ozonation (O₃) and ultraviolet (UV)/O₃ technologies. Governing factors, such as the initial molar ratio of ozone to BD, UV volumetric electric input power, and moisture content in the influent airstream, were investigated. Experiments were conducted at an influent BD concentration of ～50 ppm, an ambient temperature of 26 °C, and a gas retention time of 85 sec. Results show that an initial molar ratio of ozone to BD of 3.5 and 2 sufficed to obtain BD decompositions of >90% for ozonation and UV/O₃, respectively. The UV irradiance did not directly promote the decomposition of BD, rather, it played a role in promoting the production of secondary oxidants, such as hydroxyl radicals. Kinetic analyses indicate that both types of BD decomposition are peudo–first-order with respect to BD concentrations. Moisture content (relative humidity = 40–99%) and UV volumetric electric input power (0.147 and 0.294 W/L) are both factors that weakly affect the rate of BD decomposition. Economic evaluation factors, including both energy of ozone production and UV electric input power, were also estimated.     

Predicting Cutoff Aerodynamic Diameter and Sharpness of Single Round-Nozzle Impactors with a Finite Impaction Plate Diameter

Abstract

This investigation numerically examined the cutoff aerodynamic diameter (da₅₀) and the sharpness (GSD) of the particle collection efficiency curve of impactors with a finite impaction plate diameter. Results revealed that the inertial impactors have a limited cutoff aerodynamic diameter at different air velocities. The extreme value of the cutoff aerodynamic diameter increases with the nozzle diameter (W)/the plate diameter (D_c). The computed da₅₀/D_c values of the impactors increase with W/D_c at various Reynolds numbers (Re) and with the nozzle-toplate distance (S)/D_c when Re is 100. The value of GSD slightly increases with W/D_c for Re of 10 and 100, although the effect of S/D_c on GSD is not evident at various Res. The particle collection efficiency curve of the impactor with a lower Re is less sharp than that with a high Re at various W/D_c and S/D_c values. Statistical equations closely fitted the obtained numerical results for Res of 10–3000. The equations are useful for directly calculating the cutoff aerodynamic diameter and the sharpness of the particle collection efficiency curve for single round-nozzle impactors with a finite impaction D_c.     

Phthalate exposure in pregnant women and their children in central Taiwan

Phthalate exposure was found to be associated with endocrine disruption, respiratory effects, reproductive and developmental toxicity. The intensive use of plastics may be increasing the exposure to phthalates in Taiwanese population, particularly for young children.We studied phthalate metabolites in pregnant women and their newborns in a prospective cohort from a medical center in Central Taiwan. One hundred maternal urine samples and 30 paired cord blood and milk samples were randomly selected from all of participants (430 pregnant women). Eleven phthalate metabolites (MEHP, 5OH-MEHP, 2cx-MEHP, 5cx-MEPP, 5oxo-MEHP, MiBP, MnBP, MBzP, OH-MiNP, oxo-MiNP, and cx-MiNP) representing the exposure to five commonly used phthalates (DEHP, di-isobutyl phthalate (DiBP), DnBP, BBP, DiNP) were measured in urine of pregnant women, cord serum and breast milk after delivery, and in urine of their children. Exposure was estimated with excretion factors and correlation among metabolites of the same parent compound. Thirty and 59 urinary samples from 2 and 5 years-old children were randomly selected from 185 children successfully followed.Total urinary phthalate metabolite concentration (geometric mean, μg L⁻¹) was found to be higher in 2-years-olds (398.6) and 5-years-olds (333.7) than pregnant women (205.2). Metabolites in urine are mainly from DEHP. The proportion of DiNP metabolites was higher in children urine (4.39 and 8.31%, ages 2 and 5) than in adults (0.83%) (p < 0.01). Compared to urinary levels, phthalate metabolite levels are low in cord blood (37.45) and milk (14.90). DEHP metabolite levels in women’s urine and their corresponding cord blood are significantly correlated. Compared to other populations in the world, DEHP derived metabolites in maternal urine were higher, while phthalate metabolite levels in milk and cord blood were similar. The level of phthalate metabolites in milk and cord blood were comparable to those found in other populations. Further studies of health effects related to DEHP and DiNP exposure are necessary for the children.     

Polybrominated diphenyl ethers (PBDEs) and indicator polychlorinated biphenyls (PCBs) in marine fish from four areas of China

The levels of polybrominated diphenyl ethers (PBDEs) and indicator polychlorinated biphenyls (PCBs) were determined in marine fish from four areas of China (South China Sea, Bohai Sea, East China Sea, and Yellow Sea) using GC/NCI-MS and GC/ITMS, respectively. Total concentrations of eight PBDEs (BDE-28, 47, 99, 100, 153, 154, 183 and 209) in all samples ranged from 0.3 ng g⁻¹ ww (wet weight) to 700 ng g⁻¹ ww, with median and mean values of 85 ng g⁻¹ ww and 200 ng g⁻¹ ww, respectively. BDE-209 and BDE-47 were the major congeners in all samples, contributing 54% and 19% to the total concentration, respectively. The sum of seven indicator PCB levels (CB-28, 52, 101, 118, 138, 153, and 180) ranged from 0.3 ng g⁻¹ ww to 3.1 μg g⁻¹ ww, with median and mean values of 6.4 ng g⁻¹ ww and 398 ng g⁻¹ ww, respectively. High contributions of CB-138 (32%) and CB-153 (25%) were found in all samples. In general, pollutants measured in this study were at high levels when compared with previous studies from other regions in the world. The relative abundance of BDE-209 may suggest that deca-BDE sources existed in studied area. And principal component analysis (PCA) showed that there were other PBDE sources in Yellow Sea. The pattern and PCA showed that PCB pollutions came from similar sources in the studied areas. In addition, concentrations of ∑₇PBDEs (u/209) were strongly correlated with those of ∑₇PCBs in all fish (r = 0.907, n = 44).