• A ZnO-biochar hybrid composite was prepared by solvothermal-pyrolysis synthesis.• The superhydrophobic composite is suitable for selective recovery of Re(VII).• The adsorption mechanism is elucidated by experiments and material characterization. The recovery of scattered metal ions such as perrhenate (Re(VII)) from industrial effluents has enormous economic benefits and promotes resource reuse. Nanoscale-metal/biochar hybrid biosorbents are attractive for recovery but are limited by their insufficient stability and low selectivity in harsh environments. Herein, a superstable biochar-based biosorbent composed of ZnO nanoparticles with remarkable superhydrophobic features is fabricated, and its adsorption/desorption capabilities toward Re(VII) in strongly acidic aqueous solutions are investigated. The ZnO nanoparticle/biochar hybrid composite (ZBC) exhibits strong acid resistance and high chemical stability, which are attributable to strong C-O-Zn interactions between the biochar and ZnO nanoparticles. Due to the advantages of its hydrolytic stability, superhydrophobicity, and abundance of Zn-O sites, the ZBC proves suitable for the effective and selective separation of Re(VII) from single, binary and multiple ion systems (pH= 1), with a maximum sorption capacity of 29.41 mg/g. More importantly, this material also shows good recyclability and reusability, with high adsorption efficiency after six adsorption-desorption cycles. The findings in this work demonstrate that a metal/biochar hybrid composite is a promising sorbent for Re(VII) separation. 相似文献
• Ceramic membrane filtration showed high performance for surface water treatment.• PTC pre-coagulation could enhance ceramic membrane filtration performance.• Ceramic membrane fouling was investigated by four varied mathematical models.• PTC pre-coagulation was high-effective for ceramic membrane fouling control. Application of ceramic membrane (CM) with outstanding characteristics, such as high flux and chemical-resistance, is inevitably restricted by membrane fouling. Coagulation was an economical and effective technology for membrane fouling control. This study investigated the filtration performance of ceramic membrane enhanced by the emerging titanium-based coagulant (polytitanium chloride, PTC). Particular attention was paid to the simulation of ceramic membrane fouling using four widely used mathematical models. Results show that filtration of the PTC-coagulated effluent using flat-sheet ceramic membrane achieved the removal of organic matter up to 78.0%. Permeate flux of ceramic membrane filtration reached 600 L/(m2·h), which was 10-fold higher than that observed with conventional polyaluminum chloride (PAC) case. For PTC, fouling of the ceramic membrane was attributed to the formation of cake layer, whereas for PAC, standard filtration/intermediate filtration (blocking of membrane pores) was also a key fouling mechanism. To sum up, cross-flow filtration with flat-sheet ceramic membranes could be significantly enhanced by titanium-based coagulation to produce both high-quality filtrate and high-permeation flux. 相似文献
Environmental Science and Pollution Research - Previous studies have reported that exposure to phthalates and polycyclic aromatic hydrocarbons (PAHs) is individually associated with altered semen... 相似文献
Journal of Polymers and the Environment - Although polyvinyl alcohol (PVA) membranes are commonly used for CO2 separation, there is still large development space in mechanical properties and high... 相似文献
Ambient PM2.5 samples were collected at four sites in Xiamen, including Gulangyu (GLY), Hongwen (HW), Huli (HL) and Jimei (JM) during January, April, July and October 2013. Local source samples were obtained from coal burning power plants, industries, motor vehicles, biomass burning, fugitive dust, and sea salt for the source apportionment studies. The highest value of PM2.5 mass concentration and species related to human activities (SO42–, NO3–, Pb, Ni, V, Cu, Cd, organic carbon (OC) and elemental carbon (EC)) were found in the ambient samples from HL, and the highest and lowest loadings of PM2.5 and its components occurred in winter and summer, respectively. The reconstructed mass balance indicated that ambient PM2.5 consisted of 24% OM (organic matter), 23% sulfate, 14% nitrate, 9% ammonium, 9% geological material, 6% sea salt, 5% EC and 10% others. For the source profiles, the dominant components were OC for coal burning, motor vehicle, biomass burning and sea salt; SO42– for industry; and crustal elements for fugitive dust. Source contributions were calculated using a chemical mass balance (CMB) model based on ambient PM2.5 concentrations and the source profiles. GLY was characterized by high contributions from secondary sulfate and cooking, while HL and JM were most strongly affected by motor vehicle emissions, and biomass burning and fugitive dust, respectively. The CMB results indicated that PM2.5 from Xiamen is composed of 27.4% secondary inorganic components, 20.8% motor vehicle emissions, 11.7% fugitive dust, 9.9% sea salt, 9.3% coal burning, 5.0% biomass burning, 3.1% industry and 6.8% others.
