Record of PCB congeners, sorbents and potential toxicity in core samples in Indiana Harbor and Ship Canal

Indiana Harbor and Ship Canal (IHSC) is an active navigational system that serves a heavily industrial area of southern Lake Michigan. We have determined the amount of polychlorinated biphenyls (PCBs), congener distributions, sorbent types and potential for dioxin-like PCB toxicity from two IHSC sediment cores. Vertical distributions of ΣPCBs (sum of 161 individual or coeluting congeners) ranged from 410 to 91000 and 1800 to 41000 ng g(-1) dry weight (d.w.) for cores 1 and 2, respectively. Core 1 showed its highest accumulation rate for the year ～1979 and exhibits a strong Aroclor 1248 signal in sediments accumulating over the last 60 years. It appears that from the late 1930s until the beginning of the 1980s there was a large and constant input of PCBs into this system. This pattern differs from lake cores from the Great Lakes region which commonly exhibit a rapid increase, a peak, followed by a sharp decrease in the PCB accumulation rates. Core 2 also has a strong Aroclor 1248 signal in the top layers, but deeper layers show evidence of mixtures of Aroclors and/or weathering processes. High levels of black carbon as a fraction of total organic carbon were found in both cores (median ～30%), which reflect the long history of local combustion sources. No strong relationship was found between ΣPCB concentration and sorbents. Both cores contain dioxin-like PCBs that are highest in concentration below the surface. The high levels of PCBs in the deep sediments are of concern because of plans to dredge this system.     

Chemical characterization and factor analysis of PM2.5 in two sites of Monterrey, Mexico

The Monterrey Metropolitan Area (MMA) has shown a high concentration of PM2.5 in its atmosphere since 2003. The contribution of possible sources of primary PM2.5 and its precursors is not known. In this paper we present the results of analyzing the chemical composition of sixty 24-hr samples of PM2.5 to determine possible sources of PM2.5 in the MMA. The samples were collected at the northeast and southeast of the MMA between November 22 and December 12, 2007, using low-volume devices. Teflon and quartz filters were used to collect the samples. The concentrations of 16 airborne trace elements were determined using x-ray fluorescence (XRF). Anions and cations were determined using ion chromatography. Organic carbon (OC) and elemental carbon (EC) were determined by thermal optical analysis. The results show that Ca had the maximum mean concentration of all elements studied, followed by S. Enrichment factors above 50 were calculated for S, Cl, Cu, Zn, Br and Pb. This indicates that these elements may come from anthropogenic sources. Overall, the major average components of PM2.5 were OC (41.7%), SO4(2-) (22.9%), EC (7.4%), crustal material (11.4%), and NO3- (12.6%), which altogether accounted for 96% of the mass. Statistically, we did not find any difference in SO4(2-) concentrations between the two sites. The fraction of secondary organic carbon was between 24% and 34%. The results of the factor analysis performed over 10 metals and OC and EC show that there are three main sources of PM2.5: crustal material and vehicle exhaust; industrial activity; and fuel oil burning. The results show that SO4(2-), OC, and crustal material are important components of PM2.5 in MMA. Further work is necessary to evaluate the proportion of secondary inorganic and organic aerosol in order to have a better understanding of the sources and precursors of aerosols in the MMA.     

Extra-pair paternity in the monogamous Alpine marmot revealed by nuclear DNA microsatellite analysis

The genetic parentage and pedigrees of 35 litters from 12 family groups of monogamous Alpine marmot (Marmota marmota) in the French Alps were analyzed using six hypervariable sequence repeat nuclear loci (microsatellites). All of the members of these family groups were sampled during a 5-year period. Hairs taken directly from animals served as a source of DNA for amplification of the loci. Our results indicate that the genetic mating system of the Alpine marmot is quite different from a strictly monogamous breeding system. Extra-pair paternity occurred in 11 of the 35 litters (31.4%). Of the 134 juveniles typed, 26 (19.4%) could be attributed to extra-pair copulation (EPC). We examine hypotheses which could explain the evolution of EPC and discuss the different patterns of extra-pair mating. Received: 11 July 1997 / Accepted after revision: 23 May 1998     

Removal of Mercury from Polluted Waters by the Water Hyacinth (Eichhornia crassipes)

The uptake of mercury by water hyacinth (Eichhornia crassipes) was studied in an outdoor experiment for 25 days at different metal concentrations. the removal of mercury from the water and uptake by plants was very effective during the first hours and decreased rapidly thereafter. the uptake of mercury was directly proportional to the initial concentration in the water. the highest concentrations were found in plant roots. According to the results, water hyacinth could be used for treatment of mercurial waste waters.     

Results from a reference laboratory for prenatal diagnosis of sickle cell disorders in Cuba

A nationwide programme for the prevention of sickle cell (SS and SC) disorders was initiated in Cuba in 1983. Couples at risk were identified by screening pregnant women and the partners of those who carry an abnormal haemoglobin, followed by genetic counselling and the offer of prenatal diagnosis. Prenatal diagnosis was performed in one laboratory, which had carried out 1068 prenatal tests for Hb SS and SC disorders by the end of 1992. The centralization of the service has permitted rapid identification and resolution of problems.     

Sulfur toxicity and media capacity for H2S removal in biofilters packed with a natural or a commercial granular medium

Two types of media, a natural medium (wood chips) and a commercially engineered medium, were evaluated for sulfur inhibition and capacity for removal of hydrogen sulfide (H2S). Sulfate was added artificially (40, 65, and 100 mg of S/g of medium) to test its effect on removal efficiency and the media. A humidified gas stream of 50 ppm by volume H2S was passed through the media-packed columns, and effluent readings for H2S at the outlet were measured continuously. The overall H2S baseline removal efficiencies of the column packed with natural medium remained >95% over a 2-day period even with the accumulated sulfur species. Added sulfate at a concentration high enough to saturate the biofilter moisture phase did not appear to affect the H2S removal process efficiency. The results of additional experiments with a commercial granular medium also demonstrated that the accumulation of amounts of sulfate sufficient enough to saturate the moisture phase of the medium did not have a significant effect on H2S removal. When the pH of the biofilter medium was lowered to 4, H2S removal efficiency did drop to 36%. This work suggests that sulfate mass transfer through the moisture phase to the biofilm phase does not appear to inhibit H2S removal rates in biofilters. Thus, performance degradation for odor-removing biofilters or H2S breakthrough in field applications is probably caused by other consequences of high H2S loading, such as sulfur precipitation.     

COMPLIANCE WITH STORM WATER POLLUTION PREVENTION REGULATIONS BY THE METAL FINISHING INDUSTRY1

ABSTRACT: Federal and state storm water pollutant control regulations for industry require facilities to identify themselves and to implement appropriate controls specifically developed for each facility by its operators. Compliance is not directly observable from publicly reported information, and is believed to be low. Compliance requirements are divided into three stages: determination and notification of duty to comply; preparation of public reports and site-specific planning documents; and implementation of pollution prevention activities. Aggregate data show about 25 percent to 35 percent of metal plating facilities in California, and about 35 percent to 40 percent of facilities in the Los Angeles region, have recognized the need for first-stage compliance; the number required but failing to do so is not known. For second-stage compliance, between 77 percent and 88 percent of facilities submitted required annual reports from 1993 to 1995, while on-site water quality monitoring reports were submitted by about 60 percent of required facilities. Site investigations of ten Los Angeles area facilities showed variation in compliance with site-specific documentation and implementation requirements. Most facilities inadequately evaluated activities for potential storm water pollutants, and most prepared incomplete plans for storm water sampling and inspection procedures. Evaluation of third-stage compliance by evaluating quantitative effects of facility actions, beyond the scope of this research, is recommended.     

Tolerance to trichlorophenols in microorganisms from a polluted and a pristine site of a river

The effect of 2,4,5- and 2,4,6-trichlorophenol on the microbiota from a polluted and a pristine site of a river was studied. Bacterial metabolic activity measurements by epifluorescence microscopy showed that the polluted site contained more metabolically active cells than the pristine site. Total culturable bacterial counts and tolerant bacterial counts from both sites were not affected by incubation (for up to 5 days) with 200 ppm of chlorophenols. However, the incubation with 500 ppm of 2,4,5-trichlorophenol prevented detection of total and tolerant bacterial counts in the pristine site, and inhibited tolerants in the polluted site. None of 250 bacterial colonies directly isolated from these samples was able to grow on chlorophenols. However, bacteria able to grow on 2,4,6-trichlorophenol, were obtained by enrichment of water and sediments samples.     

Dermal exposure to pesticides in greenhouses workers: discrimination and selection of variables for the design of monitoring programs

Dermal exposure to pesticides is one of the main sanitaryproblems which greenhouses workers face. With the dual aimsof establishing both the body part that receives the greatestexposure and the variable that has greatest influence on this exposure level, 22 pesticide application trials were performed. Trials were carried out in different greenhouse vegetable crops,using different pesticides and different spray diameters from the spray gun. In order to determine dermal exposure, the wholebody method was used. Pieces of the applicator suit were subject to an extraction procedure and their pesticide contentdetermined using GC-NPD analysis. Multivariate analysis were applied to the data obtained. Principal component analysis showed that all trials produced a high exposure level on lowerleft leg and lower right leg. Cluster analysis distinguished between three sample groups. The most and the least affectedparts were clearly distinguished. Discriminant analysis indicated that the thin drop size of the spray gun is responsible for both the differences between groups and the minimum or maximum exposure level measured on the applicatorsuit. Therefore, selecting the variables, lower legs and thindrop size, is considered fundamental in designing programs formonitoring pesticide exposure.