Determining shark size from forensic analysis of bite damage

Bite damage patterns have long been used to estimate shark species and body size, with somewhat limited success. The lack of fit between damage patterns and shark size is partially due to variation in tooth size and shape within an individual. The ability to accurately predict body size from bite patterns is important for better understanding the ecological and behavioral underpinnings of shark bites/attacks on marine organisms, humans, and submarine equipment. To this end, we measured interdental distance (IDD) between the most labial teeth in the first six tooth files on both the upper and lower jaws, as well as the circumference of the portion of each jaw that bears teeth, for prepared jaw sets from fourteen shark species and regressed these data against total length. IDD is allometric as well as an accurate predictor of total length in all species examined, except Carcharhinus acronotus. Tooth-bearing circumference is also allometric and predictive of total length in all species. Though considerable overlap exists in IDD and circumference ranges among species for the total length ranges examined, Carcharodon carcharias and Isurus sp. can be differentiated from Carcharhinus limbatus, Carcharhinus brevipinna, and C. acronotus based on these values alone. When combined with knowledge of species-specific feeding behavior, geographic distribution, and habitat preferences, these simple measures from bite damage patterns allow quick, accurate assessment of shark size and potential species.     

Ultrastructure of pedal muscle as a function of temperature in nacellid limpets

Temperature and mitochondrial plasticity are well studied in fishes, but little is known about this relationship in invertebrates. The effects of habitat temperature on mitochondrial ultrastructure were examined in three con-familial limpets from the Antarctic (Nacella concinna), New Zealand (Cellana ornata), and Singapore (Cellana radiata). The effects of seasonal changes in temperature were also examined in winter and summer C. ornata. Stereological methods showed that limpet pedal myocytes were 1–2 orders of magnitude smaller in diameter (≈3.5 μm) than in vertebrates, and that the diameter did not vary as a function of temperature. Mitochondrial volume density (Vv_(mt,f)) was approximately 2–4 times higher in N. concinna (0.024) than in the other species (0.01 and 0.006), which were not significantly different from each other. Mitochondrial cristae surface density (Sv_(im,mt)) was significantly lower in summer C. ornata (24.1 ± 0.50 μm² μm⁻³) than both winter C. ornata (32.3 ± 0.95 μm² μm⁻³) and N. concinna (34.3 ± 4.43 μm² μm⁻³). The surface area of mitochondrial cristae per unit fibre volume was significantly higher in N. concinna, due largely to the greater mitochondrial volume density. These results and previous studies indicate that mitochondrial proliferation in the cold is a common, but not universal response by different species from different thermal habitats. Seasonal temperature decreases on the other hand, leading preferentially to an increase in cristae surface density. Stereological measures also showed that energetic reserves, i.e. lipid droplets and glycogen in the pedal muscle changed greatly with season and species. This was most likely related to gametogenesis and spawning.     

Sleeping with a broken promise: The moderating role of generativity concerns in the relationship between psychological contract breach and insomnia among older workers

This paper examines the relationship between psychological contract breach and insomnia among older workers (aged 40 years and up). Drawing upon the conservation of resources theory, we conceptualize breach as a stressful event characterized by a perceived threat, failure to gain, or actual loss of valued resources, which increases psychological distress and insomnia. Moreover, we hypothesized that older workers' generativity concerns would act as a personal resource that would buffer the negative impact of breach. We tested our proposed model in 2 studies (Study 1 = 123; Study 2 = 168) of employee–spouse dyads. Results revealed that psychological distress mediated the relationship between psychological contract breach and insomnia. These mediated relationships were significant for those with low, but not for those with high levels of generativity concerns. These effects remained significant even after controlling for perceived organizational support (i.e., a social exchange mechanism). Theoretical and practical implications are discussed.     

Nutrients and suspended solids in dry weather and storm flows from a tropical catchment with various proportions of rural and urban land use

The results of an investigation characterizing the nutrients and suspended solids contained in stormwater from Kranji Catchment in Singapore are reported in this paper. Stormwater samples were collected from 4 locations and analyzed for the following eleven analytes: TOC, DOC, TN, TDN, NH₄⁺, NO₂⁻ + NO₃⁻ (NO_x), TP, TDP, OP, SiO₂ and TSS. Stormwater was sampled from catchments with various proportions of rural and urban land use, including forested areas, grassed areas, agricultural and residential and commercial areas. The event mean concentrations (EMCs) of nutrients and TSS from sampling stations which have agricultural land use activities upstream were found to be higher. Comparison of site EMCs (SMCs) with published data showed that the SMCs of the nutrients and TSS are generally higher than SMCs reported for forested areas but lower than published SMCs for urban areas. Positive correlations (p < 5%) were found between loading and peak flow at locations most impacted by ubanisation or agricultural activities. Correlation between loading and rainfall variables was less distinct. EMC was found to correlate less with rainfall and flow variables compared to pollutant loading. Unlike loading, no consistent pattern exists linking EMC to any particular storm or flow variable in any of the catchments. Lastly, positive correlations were obtained between the particulate forms of nitrogen and phosphorus and TSS.     

Tillage system, application rate, and extreme event effects on herbicide losses in surface runoff

Conservation tillage can reduce soil loss; however, the residual herbicides normally used to control weeds are often detected in surface runoff at high levels, particularly if runoff-producing storms occur shortly after application. Therefore, we measured losses of alachlor, atrazine, linuron, and metribuzin from seven small (0.45-0.79-ha) watersheds for 9 yr (1993-2001) to investigate whether a reduced-input system for corn (Zea mays L.) and soybean [Glycine max (L.) Merr.] production with light disking, cultivation, and half-rate herbicide applications could reduce losses compared with chisel and no-till. As a percentage of application, annual losses were highest for all herbicides for no-till and similar for chisel and reduced-input. Atrazine was the most frequently detected herbicide and yearly flow-weighted concentrations exceeded the drinking water standard of 3 microg L(-1) in 20 out of 27 watershed years that it was applied. Averaged for 9 corn yr, yearly flow-weighted atrazine concentrations were 26.3, 9.6, and 8.3 microg L(-1) for no-till, chisel, and reduced-input, respectively. Similarly, flow-weighted concentrations of alachlor exceeded the drinking water standard of 2 microg L(-1) in 23 out of 54 application years and in all treatments. Thus, while banding and half-rate applications as part of a reduced-input management practice reduced herbicide loss, concentrations of some herbicides may still be a concern. For all watersheds, 60 to 99% of herbicide loss was due to the five largest transport events during the 9-yr period. Thus, regardless of tillage practice, a small number of runoff events, usually shortly after herbicide application, dominated herbicide transport.     

Empirical correlations to estimate agglomerate size and deposition during injection of a polyelectrolyte-modified Fe0 nanoparticle at high particle concentration in saturated sand

Controlled emplacement of polyelectrolyte-modified nanoscale zerovalent iron (NZVI) particles at high particle concentration (1-10 g/L) is needed for effective in situ subsurface remediation using NZVI. Deep bed filtration theory cannot be used to estimate the transport and deposition of concentrated polyelectrolyte-modified NZVI dispersions (>0.03 g/L) because particles agglomerate during transport which violates a fundamental assumption of the theory. Here we develop two empirical correlations for estimating the deposition and transport of concentrated polyelectrolyte-modified NZVI dispersions in saturated porous media when NZVI agglomeration in porous media is assumed to reach steady state quickly. The first correlation determines the apparent stable agglomerate size formed during NZVI transport in porous media for a fixed hydrogeochemical condition. The second correlation estimates the attachment efficiency (sticking coefficient) of the stable agglomerates. Both correlations are described using dimensionless numbers derived from parameters affecting deposition and agglomeration in porous media. The exponents for the dimensionless numbers are determined from statistical analysis of breakthrough data for polyelectrolyte-modified NZVI dispersions collected in laboratory scale column experiments for a range of ionic strength (1, 10, and 50mM Na(+) and 0.25, 1, and 1.25 mM Ca(2+)), approach velocity (0.8 to 55 × 10(-4)m/s), average collector sizes (d(50)=99 μm, 300 μm, and 880 μm), and polyelectrolyte surface modifier properties. Attachment efficiency depended on approach velocity and was inversely related to collector size, which is contrary to that predicted from classic filtration models. High ionic strength, the presence of divalent cations, lower extended adsorbed polyelectrolyte layer thickness, decreased approach velocity, and a larger collector size promoted NZVI agglomeration and deposition and thus limited its mobility in porous media. These effects are captured quantitatively in the two correlations developed. The application and limitations of using the correlations for preliminary design of in situ NZVI emplacement strategies is discussed.     

Evaluation of Sample Recovery of Malodorous Livestock Gases from Air Sampling Bags,Solid-Phase Microextraction Fibers,Tenax TA Sorbent Tubes,and Sampling Canisters

Abstract

Odorous gases associated with livestock operations are complex mixtures of hundreds if not thousands of compounds. Research is needed to know how best to sample and analyze these compounds. The main objective of this research was to compare recoveries of a standard gas mixture of 11 odorous compounds from the Carboxen/PDMS 75–μm solid–phase microextraction fibers, polyvinyl fluo–ride (PVF; Tedlar), fluorinated ethylene propylene copolymer (FEP; Teflon), foil, and polyethylene terephthalate (PET; Melinex) air sampling bags, sorbent 2,b–diphenylene–oxide polymer resin (Tenax TA) tubes, and standard 6–L Stabilizer sampling canisters after sample storage for 0.5, 24, and 120 (for sorbent tubes only) hrs at room temperature. The standard gas mixture consisted of 7 volatile fatty acids (VFAs) from acetic to hexanoic, and 4 semivolatile organic compounds including p–cresol, indole, 4–ethylphenol, and 2'–aminoacetophenone with concentrations ranging from 5.1 ppb for indole to 1270 ppb for acetic acid. On average, SPME had the highest mean recovery for all 11 gases of 106.2%, and 98.3% for 0.5– and 24–hr sample storage time, respectively. This was followed by the Tenax TA sorbent tubes (94.8% and 88.3%) for 24 and 120 hr, respectively; PET bags (71.7% and 47.2%), FEP bags (75.4% and 39.4%), commercial Tedlar bags (67.6% and 22.7%), in–house–made Tedlar bags (47.3% and 37.4%), foil bags (16.4% and 4.3%), and canisters (4.2% and 0.5%), for 0.5 and 24 hr, respectively. VFAs had higher recoveries than semivolatile organic compounds for all of the bags and canisters. New FEP bags and new foil bags had the lowest and the highest amounts of chemical impurities, respectively. New commercial Tedlar bags had measurable concentrations of N,N–dimethyl acetamide and phenol. Foil bags had measurable concentrations of acetic, propionic, butyric, valeric, and hexanoic acids.     

Stratospheric ozone,global warming,and the principle of unintended consequences—An ongoing science and policy story

Supplemental Materials: Supplemental materials are available for this paper. Go to the publisher's online edition of the Journal of the Air & Waste Management Association.      

Air Quality Management in Los Angeles: Perspectives on Past and Future Emission Control Strategies

The 1988 Air Quality Management Plan was approved by the Board of the California South Coast Air Quality Management District in March 1989. The District comprises the counties of Los Angeles, Orange, and Riverside, and the non-desert portion of San Bernardino county. Emissions reductions in the past have lead to significant improvement in air quality despite large increases in growth. However, the District, largely because of continuous growth, currently violates the air quality standards for ozone, carbon monoxide, nitrogen dioxide, and respirable particulate matter (PM₁₀). Based upon the AQMP, reduction of approximately 80 percent in emissions of oxides of nitrogen and volatile organic compounds is required to bring the District into compliance with all air quality standards in the next twenty years.

Achieving compliance will necessitate the use of advanced technologies, as well as some changes in lifestyle and management practices. Advanced technologies, including the use of electric vehicles powered by batteries or fuel cells, the use of cleaner burning fuels and advanced combustion modifications, and treatment of surface coatings and solvents are included in the AQMP. The Technology Advancement Office in the District was created to work with industry, universities, research institutes, and other local, state and federal agencies to identify, evaluate, and promote low emitting fuels and technologies. In addition to electricity, fuels burning cleaner than conventional gasoline or diesel are being tested to obtain emissions and durability data so that rational choices can be made for the future. Compressed natural gas, methanol and liquefied petroleum gas are considered to be cleaner burning fuels for current applications. Ethanol, butane, and various oxygenated blends are being evaluated, and the broader application of solar energy and hydrogen are being investigated.

The impact of various cleaner burning fuels on air quality is being addressed. To date, methanol is the only fuel for which results are available. These results indicate that methanol use in vehicles—with control of formaldehyde emissions below 15 mg/mile for light-duty vehicles—can provide air quality benefits for all criteria pollutants and certain air toxics. These benefits are greater for M₁₀₀ than M₈₅.

Several District advanced technology programs are described, including a reduction in emissions from paints and coatings, and the demonstration of electric vehicles.