Resourcefulization approaches to pollution control of chromate residues in China

Over 2 million tons of chromate residues as hazardous wastes have been accumulated from chromate production processes during the past more than 30 years in China. Some serious pollution problems have been caused due to no appropriate technology and management. Approaches are reviewed to pollution control of chromate residues by utilizing them as secondary resources in this paper. In addition to legislation for pollution control, chromate residues can be used as raw materials to produce a great diversity of useful industrial products. Strategies are also recommanded for the resourcefulization of chromate residues.     

Separation and capture of CO2 from large stationary sources and sequestration in geological formations--coalbeds and deep saline aquifers

The topic of global warming as a result of increased atmospheric CO2 concentration is arguably the most important environmental issue that the world faces today. It is a global problem that will need to be solved on a global level. The link between anthropogenic emissions of CO2 with increased atmospheric CO2 levels and, in turn, with increased global temperatures has been well established and accepted by the world. International organizations such as the United Nations Framework Convention on Climate Change (UNFCCC) and the Intergovernmental Panel on Climate Change (IPCC) have been formed to address this issue. Three options are being explored to stabilize atmospheric levels of greenhouse gases (GHGs) and global temperatures without severely and negatively impacting standard of living: (1) increasing energy efficiency, (2) switching to less carbon-intensive sources of energy, and (3) carbon sequestration. To be successful, all three options must be used in concert. The third option is the subject of this review. Specifically, this review will cover the capture and geologic sequestration of CO2 generated from large point sources, namely fossil-fuel-fired power gasification plants. Sequestration of CO2 in geological formations is necessary to meet the President's Global Climate Change Initiative target of an 18% reduction in GHG intensity by 2012. Further, the best strategy to stabilize the atmospheric concentration of CO2 results from a multifaceted approach where sequestration of CO2 into geological formations is combined with increased efficiency in electric power generation and utilization, increased conservation, increased use of lower carbon-intensity fuels, and increased use of nuclear energy and renewables. This review covers the separation and capture of CO2 from both flue gas and fuel gas using wet scrubbing technologies, dry regenerable sorbents, membranes, cryogenics, pressure and temperature swing adsorption, and other advanced concepts. Existing commercial CO2 capture facilities at electric power-generating stations based on the use of monoethanolamine are described, as is the Rectisol process used by Dakota Gasification to separate and capture CO2 from a coal gasifier. Two technologies for storage of the captured CO2 are reviewed--sequestration in deep unmineable coalbeds with concomitant recovery of CH4 and sequestration in deep saline aquifers. Key issues for both of these techniques include estimating the potential storage capacity, the storage integrity, and the physical and chemical processes that are initiated by injecting CO2 underground. Recent studies using computer modeling as well as laboratory and field experimentation are presented here. In addition, several projects have been initiated in which CO2 is injected into a deep coal seam or saline aquifer. The current status of several such projects is discussed. Included is a commercial-scale project in which a million tons of CO2 are injected annually into an aquifer under the North Sea in Norway. The review makes the case that this can all be accomplished safely with off-the-shelf technologies. However, substantial research and development must be performed to reduce the cost, decrease the risks, and increase the safety of sequestration technologies. This review also includes discussion of possible problems related to deep injection of CO2. There are safety concerns that need to be addressed because of the possibilities of leakage to the surface and induced seismic activity. These issues are presented along with a case study of a similar incident in the past. It is clear that monitoring and verification of storage will be a crucial part of all geological sequestration practices so that such problems may be avoided. Available techniques include direct measurement of CO2 and CH4 surface soil fluxes, the use of chemical tracers, and underground 4-D seismic monitoring. Ten new hypotheses were formulated to describe what happens when CO2 is pumped into a coal seam. These hypotheses provide significant insight into the fundamental chemical, physical, and thermodynamic phenomena that occur during coal seam sequestration of CO2.     

Persistent organic pollutant patterns in grey seals (Halichoerus grypus)

The aim of this paper is to examine the patterns of polychlorinated biphenyls (PCB) in the grey seals (Halichoerus grypus) from the Baltic, Northeast and Eastern England, and the St. Lawrence Estuary (Canada). In fact, the feeding habits of the ringed seal (Phoca hispida) include ingestion of major quantities of benthic crustaceans that might cause observed differences obtained in PCBs, whereas the grey seal feed mainly on fish. The profile (percent in mixture) of polychlorinated biphenyls (PCB) 101, 118, 138, 153, and 180, and the total of their concentrations in mg/kg lipid in grey seals from the Baltic, from Northeast and Eastern England, and from the St. Lawrence estuary (Canada), were examined by principal component analysis (PCA). When considering the possible effects of consuming seafood by the grey seal, it is necessary to characterize populations and individuals according to the amounts they consume, since populations in different parts of the world are likely to show big differences in their consumption of seafood. The patterns differ between juveniles and adult animals, but the gender of adults and geography do not appear to play a role.     

A screening study of the treatability of dioxins and furans in bleach plant filtrates and mill wastewaters

Findings are presented of a study to provide the pulp and paper industry with basic data regarding the feasibility for treatment of bleach plant filtrates or combined treated mill effluents for 2,3,7,8-TCDD and 2,3,7,8-TCDF reduction.     

Acute and chronic toxicity of veterinary antibiotics to Daphnia magna

The acute and chronic toxicity of nine antibiotics used both therapeutically and as growth promoters in intensive farming was investigated on the freshwater crustacean Daphnia magna. The effect of the antibiotics metronidazole (M), olaquindox (OL), oxolinic acid (OA), oxytetracycline (OTC), streptomycin (ST), sulfadiazine (SU), tetracycline (TC), tiamulin (TI) and tylosin (TY) was tested in accordance to the ISO (1989) and OECD (1996) standard procedures. The acute toxicities (48-h EC50 value, mg/l) in decreasing order were OA (4.6), TI (40), SU (221), ST (487), TY (680) and OTC (approximately 1000). NOECs were 340 mg/l for TC and 1000 mg/l for M and OL. Toxic effect on reproduction occurred generally at concentrations, which were one order of magnitude below the acute toxic levels. The chronic toxicity (EC50 values, mg/l) in the D. magna reproduction test in decreasing order were TI (5.4), SU (13.7), TC (44.8) and OTC (46.2). The NOECs (mg/l) obtained in the reproduction test with OA, ST, TY and M were 0.38 for OA, 32 for ST, 45 for TY and 250 for M. The observed toxicity of OA to D. magna indicates that this substance, which is a commonly used feed additive in fish farms, has a potential to cause adverse effects on the aquatic environment.     

Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength

Large amounts of 137Cs have been accidentally released to the subsurface from the Hanford nuclear site in the state of Washington, USA. The cesium-containing liquids varied in ionic strengths, and often had high electrolyte contents, mainly in the form of NaNO3 and NaOH, reaching concentrations up to several moles per liter. In this study, we investigated the effect of ionic strengths on Cs migration through two types of porous media: silica sand and Hanford sediments. Cesium sorption and transport was studied in 1, 10, 100, and 1000 mM NaCl electrolyte solutions at pH 10. Sorption isotherms were constructed from batch equilibrium experiments and the batch-derived sorption parameters were compared with column breakthrough curves. Column transport experiments were analyzed with a two-site equilibrium-nonequilibrium model. Cesium sorption to the silica sand in batch experiments showed a linear sorption isotherm for all ionic strengths, which matched well with the results from the column experiments at 100 and 1000 mM ionic strength; however, the column experiments at 1 and 10 mM ionic strength indicated a nonlinear sorption behavior of Cs to the silica sand. Transport through silica sand occurred under one-site sorption and equilibrium conditions. Cesium sorption to Hanford sediments in both batch and column experiments was best described with a nonlinear Freundlich isotherm. The column experiments indicated that Cs transport in Hanford sediments occurred under two-site equilibrium and nonequilibrium sorption. The effect of ionic strength on Cs transport was much more pronounced in Hanford sediments than in silica sands. Effective retardation factors of Cs during transport through Hanford sediments were reduced by a factor of 10 when the ionic strength increased from 100 to 1000 mM; for silica sand, the effective retardation was reduced by a factor of 10 when ionic strength increased from 1 to 1000 mM. A two order of magnitude change in ionic strength was needed in the silica sand to observe the same change in Cs retardation as in Hanford sediments.     

The deep-sea as a final global sink of semivolatile persistent organic pollutants? Part I: PCBs in surface and deep-sea dwelling fish of the north and south Atlantic and the Monterey Bay Canyon (California)

The understanding of the global environmental multiphase distribution of persistent organic pollutants (POPs) as a result of the physico-chemical properties of the respective compounds is well established. We have analysed the results of a vertical transport of POPs from upper water layers (0-200 m) to the deepwater region (> 800 m) in terms of the contamination of the biophase in both water layers. The contents of persistent organochlorine compounds like polychlorinated biphenyls (PCBs) in fish living in the upper water layers of the North Atlantic and the South Atlantic, and at the continental shelf of California (Marine Sanctuary Monterey Bay and its deep-sea Canyon) are compared to the levels in deep-sea or bottom dwelling fish within the same geographic area. The deep-sea biota show significantly higher burdens as compared to surface-living species of the same region. There are also indications for recycling processes of POPs--in this case the PCBs--in the biophase of the abyss as well. It can be concluded that the bio- and geo phase of the deep-sea may act similarly as the upper horizons of forest and grasslands on the continents as an ultimate global sink for POPs in the marine environment.     

Investigation of metal ions binding of humic substances using fluorescence emission and synchronous-scan spectroscopy

The binding site interactions of IHSS humic substances, Suwannee River Humic Acid, Suwannee River Fulvic Acid, Nordic Fulvic Acid, and Aldrich Humic Acid with various metals ions and a herbicide, methyl viologen were investigated using fluorescence emission and synchronous-scan spectroscopy. The metal ions used were, Fe(III), Cr(III), Cr(VI), Pb(II), Cu(II) and Ni(II). Stern-Volmer constants, Ksv for these quenchers were determined at pH 4 and 8 using an ionic strength of 0.1 M. For all four humic substances, and at both pH studied, Fe(III) was found to be the most efficient quencher. Quenching efficiency was found to be 3-10 times higher at pH 8. The bimolecular quenching rate constants were found to exceed the maximum considered for diffusion controlled interactions, and indicate that the fluorophore and quencher are in close physical association. Synchronous-scan spectra were found to change with pH and provided useful information on binding site interactions between humic substances and these quenchers.     

Spatial PM2.5 mobile source impacts using a calibrated indicator method

Motor vehicles are major sources of fine particulate matter (PM_2.5), and the PM_2.5 from mobile vehicles is associated with adverse health effects. Traditional methods for estimating source impacts that employ receptor models are limited by the availability of observational data. To better estimate temporally and spatially resolved mobile source impacts on PM_2.5, we developed an approach based on a method that uses elemental carbon (EC), carbon monoxide (CO), and nitrogen oxide (NO_x) measurements as an indicator of mobile source impacts. We extended the original integrated mobile source indicator (IMSI) method in three aspects. First, we generated spatially resolved indicators using 24-hr average concentrations of EC, CO, and NO_x estimated at 4 km resolution by applying a method developed to fuse chemical transport model (Community Multiscale Air Quality Model [CMAQ]) simulations and observations. Second, we used spatially resolved emissions instead of county-level emissions in the IMSI formulation. Third, we spatially calibrated the unitless indicators to annually-averaged mobile source impacts estimated by the receptor model Chemical Mass Balance (CMB). Daily total mobile source impacts on PM_2.5, as well as separate gasoline and diesel vehicle impacts, were estimated at 12 km resolution from 2002 to 2008 and 4 km resolution from 2008 to 2010 for Georgia. The total mobile and separate vehicle source impacts compared well with daily CMB results, with high temporal correlation (e.g., R ranges from 0.59 to 0.88 for total mobile sources with 4 km resolution at nine locations). The total mobile source impacts had higher correlation and lower error than the separate gasoline and diesel sources when compared with observation-based CMB estimates. Overall, the enhanced approach provides spatially resolved mobile source impacts that are similar to observation-based estimates and can be used to improve assessment of health effects.

Implications: An approach is developed based on an integrated mobile source indicator method to estimate spatiotemporal PM_2.5 mobile source impacts. The approach employs three air pollutant concentration fields that are readily simulated at 4 and 12 km resolutions, and is calibrated using PM_2.5 source apportionment modeling results to generate daily mobile source impacts in the state of Georgia. The estimated source impacts can be used in investigations of traffic pollution and health.