Ecotoxicity of imidacloprid to soil invertebrates in two tropical soils with contrasting texture

Environmental Science and Pollution Research - Imidacloprid is one of the most commercialized insecticides in agriculture in the world, with a broad spectrum of action. However, little is known...     

Regression models for exceedance data via the full likelihood

Many situations in practice require appropriate specification of operating characteristics under extreme conditions. Typical examples include environmental sciences where studies include extreme temperature, rainfall and river flow to name a few. In these cases, the effect of geographic and climatological inputs are likely to play a relevant role. This paper is concerned with the study of extreme data in the presence of relevant auxiliary information. The underlying model involves a mixture distribution: a generalized Pareto distribution is assumed for the exceedances beyond a high threshold and a non-parametric approach is assumed for the data below the threshold. Thus, the full likelihood including data below and above the threshold is considered in the estimation. The main novelty is the introduction of a regression structure to explain the variation of the exceedances through all tail parameters. Estimation is performed under the Bayesian paradigm and includes model choice. This allows for determination of higher quantiles under each covariate configuration and upper bounds for the data, where appropriate. Simulation results show that the models are appropriate and identifiable. The models are applied to the study of two temperature datasets: maxima in the U.S.A. and minima in Brazil, and compared to other related models.     

Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Mercury pollution in Ria de Aveiro (Portugal): a review of the system assessment

The Ria de Aveiro (Portugal) is a coast al lagoon adjacent to the Atlantic Ocean and it has an inner bay (Laranjo bay) that received a highly contaminated effluent discharged by a mercury cell chlor-alkali plant from the 1950s until 1994. The aim of this study is to review in a holistic way several research studies that have been carried out in the Ria de Aveiro, in order to evaluate the remobilization of the mercury accumulated within the system and the recovery of the lagoon. The spatial distribution of the total mercury in the surrounding terrestrial environment has also been considered. Results indicate that the main mercury contamination problems in the Ria de Aveiro are confined to the Laranjo bay. Mercury export to the coastal waters and its impact on the nearshore compartments (water column, sediment and biota) are low. No direct effects of the mercury from nearby industrial activities were detected in Aveiro's urban soils, although historical mercury contamination is still affecting soil quality in the immediate vicinity of the chlor-alkali plant, located in Estarreja. Moreover, macrophyte harvesting for human direct or indirect use and the consumption of mussels, crabs and the sea bass from the Laranjo bay may constitute a health risk. Further studies focusing on developing skills for the restoration of the ecosystem are presently underway.     

Comparative study on the susceptibility of freshwater species to copper-based pesticides

Copper compounds have been intentionally introduced into water bodies as aquatic plant herbicides, algicides and molluscicides. Copper-based fertilizers and fungicides have been widely used in agriculture as well. Despite the fact that copper is an essential element for all biota, elevated concentrations of this metal have been shown to affect a variety of aquatic organisms. Nonetheless, comparative studies on the susceptibility of different freshwater species to copper compounds have seldom been performed. This study was conducted to compare toxicity of copper-based pesticides (copper oxychloride, cuprous oxide and copper sulfate) to different freshwater target (Raphidocelis subcapitata, a planktonic alga and Biomphalaria glabrata, a snail) and non-target (Daphnia similis, a planktonic crustacean and Danio rerio, a fish) organisms. Test water parameters were as follows: pH = 7.4 +/- 0.1; hardness 44 +/- 1 mg/l as CaCO3; DO 8-9 mg/l at the beginning and > 4 mg/l at the end; temperature, fish and snails 25 +/- 1 degrees C, Daphnia 20 +/- 2 degrees C, algae 24 +/- 1 degrees C. D. similis (immobilization), 48-h EC50s (95% CLs) ranging from 0.013 (0.011-0.016) to 0.043 (0.033-0.057) mg Cu/l, and R. subcapitata (growth inhibition), 96-h IC50s from 0.071 (0.045-0.099) to 0.137 (0.090-0.174) mg Cu/l, were the most susceptible species. B. glabrata (lethality), 48-h LC50s from 0.179 (0.102-0.270) to 0.854 (0.553-1.457) mg Cu/l, and D. rerio (lethality), 48-h LC50s 0.063 (0.045-0.089), 0.192 (0.133-0.272) and 0.714 (0.494-1.016) mg Cu/l, were less susceptible than Daphnia to copper-based pesticides. Findings from the present study therefore suggest that increased levels of copper in water bodies is likely to adversely affect a variety of aquatic species.     

Chemometric tools applied to optimize a fast solid-phase microextraction method for analysis of polycyclic aromatic hydrocarbons in produced water

Environmental Science and Pollution Research - Chemometric tools are powerful strategies to efficiently optimize many processes. These tools were employed to optimize a fast-solid phase...     

Procedures for estimation of modelling uncertainty in air quality assessment

The main objectives of this work focus, firstly, on a review of the current existent methodologies to estimate air quality modelling uncertainty, and, secondly, in the preparation of guidelines for modelling uncertainty estimation, which can be used by local and regional authorities responsible for air quality management. From the application exercise, it was concluded that it is possible to define a subset of statistical parameters able to reproduce the general uncertainties estimation. Concerning the quality indicators defined by EU directives, the results show that the legislated uncertainty estimation measures are ambiguous and inadequate in several aspects, mainly in what concerns the error measures for hourly and daily indicators based on the highest observed concentration. A relative error at the percentile correspondent to the allowed number of exceedances of the limit value was suggested and tested, showing that is a more robust and appropriate parameter for model performance evaluation.