Communal nesting, kinship, and maternal success in a social primate

Communal nesting, where several mothers regularly pool and cooperatively rear offspring, is unusual in mammals. This type of crèching behavior is especially rare among primates, with the notable exceptions of humans, some nocturnal strepsirrhines, and—as we show in this study—black-and-white ruffed lemurs (Varecia variegata). Here, we combine data on nesting behavior, genetic relatedness, and infant survivorship to describe variation in ruffed lemur infant care and to examine the potential benefits of ruffed lemur communal breeding. Reproductive events were rare, and females produced litters (synchronously) only once in 6 years of observation. We show that not all mothers participate in communal crèches, but those that did had greater maternal success; communal breeders spent more time feeding and their offspring were more likely to survive. Although cooperating mothers were often related, females also cooperated with non-kin, and those who shared infant care responsibilities had greater maternal success than mothers who did not participate. If there is indeed a causal link between maternal cooperation and reproductive success, this unusual behavior, like that of human communal rearing, may have evolved via some combination of kin selection and mutualism.     

Bird disturbance on conservation sites in Brittany (France): the standpoint of geographers

Bird disturbance by human activities is one of the impacts related to human presence at conservation sites in Brittany (France). This paper is an attempt at reviewing this relatively unknown problem through the results of an international bibliographical review and of a regional inquiry conducted in close collaboration with managers of the conservation areas in Brittany. These two approaches will help to demonstrate the extent and complexity of the human / fauna interactions, as well as to take stock of the state of research in this field and, last but not least, to highlight the difficulties managers of conservation sites are facing to deal with this new issue. For the managers, bird disturbance is indeed the most important impact related to human attendance on conservation sites in Brittany.     

使用底栖和浮游桡足类生物测试评估沉积物修复方案的效果

三丁基锡（TBT）是一种常见于船舶防污涂料中的有机锡化合物。尽管该化学物已于2008年被禁用,但在ports和港口等海上交通区域仍可检出致毒水平（浓度）的TBT。一项补救方案在新西兰的一个港口实施,以将TBT和铜的浓度降低到可接受的（浓度）值。这项研究使用分析化学和桡足类生物测试相结合的方法评估了该方案的有效性。在港口内的三个空间梯度上采集沉积物和水样,并在修复前后测定了有机锡和金属含量。利用底栖和浮游桡足类生物测试估算了沉积物和淘析样品的毒性。虽然底泥样品的急性毒性在修复后减少,但对底栖桡足类的繁殖率仍有影响。本研究所采用的方法有望评估沿海地区修复过程的效果。     

Estimating Evapotranspiration for Dryland Cropping Systems in the Semiarid Texas High Plains Using SWAT

The Soil and Water Assessment Tool (SWAT) is one of the most widely used watershed models for simulating hydrology in response to agricultural management practices. However, limited studies have been performed to evaluate the SWAT model's ability to estimate daily and monthly evapotranspiration (ET) in semiarid regions. ET values were simulated using ArcSWAT 2012 for a lysimeter field managed under dryland conditions at the USDA‐ARS Conservation and Production Research Laboratory at Bushland, Texas, and compared with measured lysimeter values from 2000 to 2010. Two scenarios were performed to compare SWAT's performance: (1) use of default plant leaf area index (LAI) values in the embedded plant database and (2) adjusted LAI values. Scenario 1 resulted in an “unsatisfactory” Nash‐Sutcliffe efficiency (NSE) of 0.42 and 0.38 for the calibration and validation periods, respectively. Scenario 2 resulted in a “satisfactory” NSE value for the calibration period while achieving a “good” NSE of 0.70 for the validation period. SWAT generally underestimated ET at both the daily and monthly levels. Overestimation during fallow years may be due to the limitations of the pothole function used to simulate furrow diking. Users should be aware of potential errors associated with using default LAI parameters. Inaccuracies in ET estimation may also stem from errors in the plant stress functions, particularly when evaluating water management practices for dryland watersheds.     

Assessing the fate of radioactive nickel in cultivated soil cores

Parameters regarding fate of ⁶³Ni in the soil–plant system (soil: solution distribution coefficient, K_d and soil plant concentration ratio, CR) are mostly determined in controlled pot experiments or from simple models involving a limited set of soil parameters. However, as migration of pollutants in soil is strongly linked to the water migration, variation of soil structure in the field and seasonal variation of evapotranspiration will affect these two parameters. The aim of this work was to explore to what extent the downward transfer of ⁶³Ni and its uptake by plants from surface-contaminated undisturbed soil cores under cultivation can be explained by isotopic dilution of this radionuclide in the pool of stable Ni of soils. Undisturbed soil cores (50 cm × 50 cm) were sampled from a brown rendzina (Rendzic Leptosol), a colluvial brown soil (Fluvic Cambisol) and an acidic brown soil (Dystric Cambisol) using PVC lysimeter tubes (three lysimeters sampled per soil type). Each core was equipped with a leachate collector. Cores were placed in a greenhouse and maize (DEA, Pioneer^®) was sown. After 44 days, an irrigation was simulated at the core surfaces to supply 10 000 Bq ⁶³NiCl₂. Maize was harvested 135 days after ⁶³Ni input and radioactivity determined in both vegetal and water samples. Effective uptake of ⁶³Ni by maize was calculated for leaves and kernels. Water drainage and leaching of ⁶³Ni were monitored over the course of the experiment. Values of K_d in surface soil samples were calculated from measured parameters of isotopic exchange kinetics. Results confirmed that ⁶³Ni was strongly retained at the soil surface. Prediction of the ⁶³Ni downward transfer could not be reliably assessed using the K_d values, since the soil structure, which controls local water fluxes, also affected both water and Ni transport. In terms of ⁶³Ni plant uptake, the effective uptake in undisturbed soil cores is controlled by isotope dilution as previously shown at the pot experiment scale.     

Brown rust disease control in winter wheat: I. Exploring an approach for disease progression based on night weather conditions

An empirical approach for simulating the infection and progress of leaf rust (caused by Puccinia triticina) during stem elongation on winter wheat was analysed for the 2000 to 2006 growing seasons. The approach was elaborated based on night weather conditions (i.e., air temperature, relative humidity and rainfall) and leaf rust occurrences. Data from three consecutive cropping seasons (2000–2002) at four representative sites of the Grand-Duchy of Luxembourg were used in the set-up phase. The capability to correctly simulate the occurrence expression of P. triticina infections on the upper leaf layers was then assessed over the 2003–2006 period. Our study revealed that the development of leaf rust required a period of at least 12 consecutive hours with air temperatures ranging between 8 and 16 °C, a relative humidity greater than 60 % (optimal values being 12–16 °C and up to 80 % for air temperatures and relative humidity, respectively) and rainfall less than 1 mm. Moreover, leaf rust occurrences and infections were satisfactorily simulated. The false alarm ratio was ranged from 0.06 to 0.20 in all the study sites. The probability of detection and critical success index for WLR infection were also close to 1 (perfect score).     

Acceptable Cancer Risks: Probabilities and Beyond

The acceptability of cancer risk requires consideration of factors that extend beyond mere numerical representations, such as either individual lifetime risk in excess of background and excess incidence. Recently, use of these numbers has been tempered by the addition of qualitative weights-of-evidence that describe the degree of support provided by animal and epidemiologic results. Nevertheless, many other factors, most of which are not quantitative, require incorporation but remain neglected by the analyst eager to use quantitative results.

In this paper we show that simple risk measures are often fraught with problems. Moreover, these measures do not incorporate the very essence of acceptability, which includes notions of responsibility, accountability, equity, and procedural legitimacy, among others. We link the process of risk assessment to those legal and regulatory standards that shape it. These standards are among the principal means to resolve risk-related disputes and to enhance the balancing of competing interests when science and law meet on uncertain and often conjectural ground.

We conclude the paper with a proposal for the portfolio approach to manage cancer risks and to deal with uncertain scientific information. This approach leads to the concept of "provisional acceptability," which reflects the choices available to the decisionmaker, and the trade-offs inherent to such choices.     

The Effects of Photochemical Oxidants on Materials

The excessive cracking of rubber products was one of the earliest indicators of the presence of atmospheric photochemical oxidants. It has been demonstrated that this excessive cracking of rubber is caused by atmospheric ozone formed in the photochemical smog formation process. Depending on the formulation of the rubber, cracking under stress can readily be detected within 3/4 hr when atmospheric oxidant levels are as low as 0.03 ppm. Natural and certain synthetic rubbers are particularly vulnerable. These rubbers when stressed show cracking when exposed to 0.02 ppm laboratory ozone for about 1 hr. Other materials known to deteriorate under atmospheric photochemical smog conditions are textiles and certain dyed fabrics, particularly under conditions of high humidity. Loss of tensile strength of cotton textiles when wet or moist, and similar fading of these dyed fabrics, particularly under high humidity, can be also produced by laboratory exposure of these textiles to pure ozone. Ozone effects on asphaltic materials ate also reported.     

Control of Fly Ash from Conventional Coal-Fired Utility Boilers

This paper presents a detailed review and critical evaluation of current technologies as applied to fine particulate emissions from coal-fired utility boilers. Quantitative assessments of the capabilities of both conventional and novel air pollution control devices to meet three different performance standards—the present New Source Performance Standard (NSPS) of 0.03 Ib particulate/MBtu heat input, and standards of 0.05 and 0.1 Ib particulate/MBtu are included. Each of the three conventional devices (electrostatic precipitator, fabric filter baghouse, and wet scrubber) is compared and rated with respect to eight different performance categories. This information can be used to determine the relative effectiveness and attractiveness of these three control devices. Novel devices are compared and rated in the same manner, the conclusions from which may provide the research administrator with a guide for the selection of those novel devices which offer the best potential for commercialization.

The major conclusions of the investigation are: (1) The use of conventional scrubbers for fine particulate control on coal-fired utility boilers may no longer be feasible at the new NSPS of 0.03 Ib/MBtu. (2) At the old NSPS (0.1 Ib/MBtu) conventional electrostatic precipitators and baghouses were often competitive. For the new stricter standard, however, the baghouse generally is the more attractive alternative. (3) Novel devices appear to offer almost no hope for this particular application (at a commercial level) between now and 1985 and only little hope before 1990.