Particle size distribution of airborne Aspergillus fumigatus spores emitted from compost using membrane filtration

Information on the particle size distribution of bioaerosols emitted from open air composting operations is valuable in evaluating potential health impacts and is a requirement for improved dispersion simulation modelling. The membrane filter method was used to study the particle size distribution of Aspergillus fumigatus spores in air 50 m downwind of a green waste compost screening operation at a commercial facility. The highest concentrations (approximately 8 × 10⁴ CFU m⁻³) of culturable spores were found on filters with pore diameters in the range 1–2 μm which suggests that the majority of spores are emitted as single cells. The findings were compared to published data collected using an Andersen sampler. Results were significantly correlated (p < 0.01) indicating that the two methods are directly comparable across all particles sizes for Aspergillus spores.     

From land cover change to land function dynamics: a major challenge to improve land characterization

Land cover change has always had a central role in land change science. This central role is largely the result of the possibilities to map and characterize land cover based on observations and remote sensing. This paper argues that more attention should be given to land use and land functions and linkages between these. Consideration of land functions that provide a wide range of goods and services makes more integrated assessments of land change possible. The increasing attention to multifunctional land use is another incentive to develop methods to assess changes in land functions. A number of methods to quantify and map the spatial extent of land use and land functions are discussed and the implications for modeling are identified based on recent model approaches in land change science. The mixed use of land cover, land use and land function in maps and models leads to inconsistencies in land change assessments. Explicit attention to the non-linear relations between land cover, land use and land function is essential to consistently address land change. New methods to map and quantify land function dynamics will enhance our ability to understand and model land system change and adequately inform policies and planning.     

Development and evaluation of a risk management methodology for pedestrian surfaces

This paper describes the development and evaluation of the Pedestrian Surface (PS) priority indicator (PS priority indicator). This tool was developed to comply with Australian Standard AS 4360: 2004 (Risk Management). Pedestrian surfaces should be evaluated to identify hazards and assess the level of risk calculated in order to ensure that the surfaces do not have a significant level of risk. If a significant level of risk is present, then control measures should be implemented. Pedestrian surfaces for the purposes of this research are classified as same level surfaces (excluding stairways) where pedestrians on foot (or by wheelchair) travel from one place to another.     

Measuring the effectiveness of landscape approaches to conservation and development

Landscape approaches attempt to achieve balance amongst multiple goals over long time periods and to adapt to changing conditions. We review project reports and the literature on integrated landscape approaches, and found a lack of documented studies of their long-term effectiveness. The combination of multiple and potentially changing goals presents problems for the conventional measures of impact. We propose more critical use of theories of change and measures of process and progress to complement the conventional impact assessments. Theories of change make the links between project deliverables, outputs, outcomes, and impacts explicit, and allow a full exploration of the landscape context. Landscape approaches are long-term engagements, but short-term process metrics are needed to confirm that progress is being made in negotiation of goals, meaningful stakeholder engagement, existence of connections to policy processes, and effectiveness of governance. Long-term impact metrics are needed to assess progress on achieving landscapes that deliver multiple societal benefits, including conservation, production, and livelihood benefits. Generic criteria for process are proposed, but impact metrics will be highly situation specific and must be derived from an effective process and a credible theory of change.     

Evaluating Sources of Indoor Air Pollution

Evaluation of Indoor air pollution problems requires an understanding of the relationship between sources, air movement, and outdoor air exchange. Research is underway to investigate these relationships. A three-phase program is being implemented: 1) Environmental chambers are used to provide source emission factors for specific indoor pollutants; 2) An IAQ (Indoor Air Quality) model has been developed to calculate indoor pollutant concentrations based on chamber emissions data and the air exchange and air movement within the indoor environment; and 3) An IAQ test house is used to conduct experiments to evaluate the model results. Examples are provided to show how this coordinated approach can be used to evaluate specific sources of indoor air pollution. Two sources are examined: 1) para-dichlorobenzene emissions from solid moth repellant; and 2) particle emissions from unvented kerosene heaters.

The evaluation process for both sources followed the three-phase approach discussed above. Para-dichlorobenzene emission factors were determined by small chamber testing at EPA’s Air and Energy Engineering Research Laboratory. Particle emission factors for the kerosene heaters were developed In large chambers at the J. B. Pierce Foundation Laboratory. Both sources were subsequently evaluated in EPA’s IAQ test house. The IAQ model predictions showed good agreement with the test house measurements when appropriate values were provided for source emissions, outside air exchange, in-house air movement, and deposition on “sink” surfaces.     

Analysis for Exhaust Gas Hydrocarbons—Nondispersive Infrared Versus Flame-lonizaticn

An investigation has been made of the suitability of a nondispersive infrared analyzer and two flame-ionization analyzers for measuring the total hydrocarbon concentrations of automobile exhaust gas. The investigation consisted of measuring relative responses of various hydrocarbons, checking for possible exhaust gas interferences and finally comparing exhaust hydrocarbon concentrations indicated by the flame-ionization analyzer to those indicated by the infrared analyzer. The infrared analyzer has high relative responses for parraffins and low responses for olefins, acetylenes, and aromatics. Also, the infrared indicated hydrocarbon concentrations must be corrected for exhaust water vapor interference. When the flameionization analyzers are operated at conditions that result in approximately uniform response to hydrocarbons and low oxygen interference, the exhaust hydrocarbon concentrations indicated by either flameionization analyzer are better approximations of the total hydrocarbon concentration than those indicated by the infrared analyzer.     

Oxygen Stratification in Industrial Boiler Stacks

The DSS/2 software system was used to numerically simulate oxygen stratification effects in a typical industrial boiler stack. The model developed for the simulation involves turbulent mass transfer in a tube with a constant, high mass flux from the walls of the tube. The concentration profile is considered to be developing, but the velocity profile is assumed to be fully developed. The model is for a gaseous system at constant temperature and pressure; the transport properties are shown to be constant. The universal velocity profile for turbulent flow and von Karman’s expressions for the turbulent eddy diffusivity are incorporated in the model. An expression for a wall concentration profile corresponding to conditions of high mass flux at the wall is developed. The model is then expressed as a system of partial differential equations which are solved using the numerical method of lines together with the DSS/2 numerical integration system. The resulting concentration profiles are presented for various flux rates which might be encountered in a typical stack. These profiles indicate that a potential for oxygen stratification in stacks does exist; they also suggest that careful placement of the oxygen cell probe can help minimize such errors.     

Transport of chlorinated dioxins and furans in soil columns: modeling pentachlorophenol pole-treating oil influence

Column experiments were conducted to validate a screening model predicting the influence of pentachlorophenol (PCP) pole-treating oil on the vertical migration of its impurities, chlorinated dioxins and furans (PCDD/Fs). PCP pole-treating oil (15 mL d⁻¹) and water (20 mL d⁻¹) were added daily to the top of sand and organic soil columns during 35 d. Column soil samples were analyzed to determine concentrations of hydrocarbons and PCDD/Fs at several depths in the columns (0-30 cm) and their evolution in time (7, 14, 21 and 35 d).The model predicted a significant vertical migration of PCDD/Fs due to the presence of oil as a free phase and PCDD/Fs were found in the different column layers at concentrations consistent with model predictions (same order of magnitude). Measured PCDD/Fs concentrations are in total disagreement with literature data and with model prediction in the absence of oil free phase, which implies PCDD/F properties alone cannot be used to predict their fate in the current context: the influence of PCP pole-treating oil must be accounted for to properly explain their migration.     

Second generation anticoagulant rodenticides in predatory birds: Probabilistic characterisation of toxic liver concentrations and implications for predatory bird populations in Canada

Second-generation anticoagulant rodenticides (SGARs) are widely used to control rodent pests but exposure and poisonings occur in non-target species, such as birds of prey. Liver residues are often analysed to detect exposure in birds found dead but their use to assess toxicity of SGARs is problematic. We analysed published data on hepatic rodenticide residues and associated symptoms of anticoagulant poisoning from 270 birds of prey using logistic regression to estimate the probability of toxicosis associated with different liver SGAR residues. We also evaluated exposure to SGARs on a national level in Canada by analysing 196 livers from great horned owls (Bubo virginianus) and red-tailed hawks (Buteo jamaicensis) found dead at locations across the country. Analysis of a broader sample of raptor species from Quebec also helped define the taxonomic breadth of contamination. Calculated probability curves suggest significant species differences in sensitivity to SGARs and significant likelihood of toxicosis below previously suggested concentrations of concern (<0.1mg/kg). Analysis of birds from Quebec showed that a broad range of raptor species are exposed to SGARs, indicating that generalised terrestrial food chains could be contaminated in the vicinity of the sampled areas. Of the two species for which we had samples from across Canada, great horned owls are exposed to SGARs to a greater extent than red-tailed hawks and the liver residue levels were also higher. Using our probability estimates of effect, we estimate that a minimum of 11% of the sampled great horned owl population is at risk of being directly killed by SGARs. This is the first time the potential mortality impact of SGARs on a raptor population has been estimated.