Automated energy management in distributed electricity systems: An EEPOS approach

The increasing capacity of distributed electricity generation brings new challenges in maintaining a high security and quality of electricity supply. New techniques are required for grid support and power balance. The highest potential for these techniques is to be found on the part of the electricity distribution grid.

This article addresses this potential and presents the EEPOS project’s approach to the automated management of flexible electrical loads in neighborhoods. The management goals are (i) maximum utilization of distributed generation in the local grid, (ii) peak load shaving/congestion management, and (iii) reduction of electricity distribution losses. Contribution to the power balance is considered by applying two-tariff pricing for electricity.

The presented approach to energy management is tested in a hypothetical sensitivity analysis of a distribution feeder with 10 households and 10 photovoltaic (PV) plants with an average daily consumption of electricity of 4.54 kWh per household and a peak PV panel output of 0.38 kW per plant. Energy management shows efficient performance at relatively low capacities of flexible load. At a flexible load capacity of 2.5% (of the average daily electricity consumption), PV generation surplus is compensated by 34–100% depending on solar irradiance. Peak load is reduced by 30% on average. The article also presents the load shifting effect on electricity distribution losses and electricity costs for the grid user.     

Leaching behavior of some demolition wastes

Demolition wastes may be used in different civil engineering applications as road constructions, concrete, and embankments or landfill. Regardless its application, leaching tests of the waste should be carried out to assess concentrations of pollutants. Concrete, brick and mixture of concrete, bricks, tiles and ceramics wastes were subject to percolation test—CEN/TS 14405, and batch test—SR EN 12457. The leachates were analyzed with respect to concentration of inorganic elements—arsenic, barium, cadmium, chromium, copper, mercury, molybdenum, nickel, lead, selenium, zinc, fluoride, chloride and sulfate, and organic compounds (phenol index). The concentrations of elements in leachates were compared with the limit values of European regulation for the acceptance of inert wastes at landfills. Generally, the releases of inorganic species in leachates were below limits values. Some waste leachates obtained by percolation and batch test had high values for phenol index.     

Comparing Costs of Onsite Best Management Practices to Nutrient Credits for Stormwater Management: A Case Study in Virginia

Best management practices (BMPs) are widely used to mitigate impacts of increased impervious surfaces on stormwater runoff. However, there is limited detailed and up‐to‐date information available on the cost of designing, constructing, and maintaining BMPs over their lifetime. The objective of this study is to analyze BMPs recently constructed by the Virginia Department of Transportation (VDOT) to quantify their total cost per pound of phosphorus removed annually. A motivating factor for the study is recent changes to regulatory guidelines in Virginia which allow for full or partial substitution of purchased nutrient credits in lieu of constructing onsite BMPs to achieve compliance with stormwater quality regulations. Results of the analysis of nine BMPs found their cost ranged from $20,100 to $74,900, in 2014 dollars, per pound ($44,313‐$165,126 per kg) of phosphorus removed. Based on these results and assuming current credit prices procured by VDOT, purchasing nutrient credits is a cost‐effective option for the agency, especially when factoring in the cost of additional right of way for the BMP. Based on this finding, we expect compliance with stormwater quality regulations through credit purchases to become more widely used in Virginia. Moving forward, we suggest more direct tracking of BMP costs to support comparisons between BMP costs across a range of types and conditions to credit purchases for meeting stormwater regulations.     

Recovering Food Commons in Post Industrial Europe: Cooperation Networks in Organic Food Provisioning in Catalonia and Norway

This paper explores food commoning through an ethnographic case study in Catalonia as our primary site while the Norwegian case is juxtaposed as a comparison, two agriculturally and economically different European countries. The ethnography analyses cooperation networks between organic food producers’ and consumers’ involving different nodes of community gardening initiatives, self-employed growers, local farmers and all of them under a unique cooperative integrating a community economy. The result it is a myriad of exchange practices ranging from reciprocity and barter to market exchange without intermediaries through on-line platforms. Along these exchanges different options of currency intervene giving rise to novel social and cooperative relations. Similar initiatives in Norway show less variation and are less experimental regarding forms of payment but share similarities in relation to material articulations, concerns and forms of alternative practice. Although these novel forms do not represent a complete break from the more standardized supply chains, and hence from the oppositions/contradictions of production and consumption, the participants see themselves as contributing to a more general process of de-commodification of food. We explore the extent to which the meaning and moral values are mutually constituted in relation to socioeconomic exchanges and environmental caring that each person experiences based on different forms of cooperation and reciprocity. Food, we suggest, is more than a commodity on the market that we may influence through our role as consumers. It is a significant focal point connecting our lives to those of others that articulates one’s relations to society in a political manner.     

Ultrasound effects on the activity of Aspergillus niger lipases in their application in dairy wastewater treatment

We evaluated the effect of ultrasound radiation on lipase activity. The experiments were conducted using a low‐cost crude enzyme extract. We then used this lipase to treat dairy effluent. The results of our study presented an increase of approximately 430% in the concentration of free fatty acids.     

Detention Outlet Retrofit Improves the Functionality of Existing Detention Basins by Reducing Erosive Flows in Receiving Channels

By discharging excess stormwater at rates that more frequently exceed the critical flow for stream erosion, conventional detention basins often contribute to increased channel instability in urban and suburban systems that can be detrimental to aquatic habitat and water quality, as well as adjacent property and infrastructure. However, these ubiquitous assets, valued at approximately $600,000 per km² in a representative suburban watershed, are ideal candidates to aid in reversing such cycles of channel degradation because improving their functionality would not necessarily require property acquisition or heavy construction. The objective of this research was to develop a simple, cost‐effective device that could be installed in detention basin outlets to reduce the erosive power of the relatively frequent storm events (~ < two‐year recurrence) and provide a passive bypass to maintain flood control performance during infrequent storms (such as the 100‐year recurrence). Results from a pilot installation show that the Detain H₂O device reduced the cumulative sediment transport capacity of the preretrofit condition by greater than 40%, and contributed to reduced flashiness and prolonged baseflows in receiving streams. When scaling the strategy across a watershed, these results suggest that potential gains in water quality and stream channel stability could be achieved at costs that are orders of magnitude less than comparable benefits from newly constructed stormwater control measures.     

Evaluation of Existing and Modified Wetland Equations in the SWAT Model

The ability to accurately simulate flow and nutrient removal in treatment wetlands within an agricultural, watershed‐scale model is needed to develop effective plans for meeting nutrient reduction goals associated with protection of drinking water supplies and reduction of the Gulf of Mexico hypoxic zone. The objectives of this study were to incorporate new equations for wetland hydrology and nutrient removal in Soil and Water Assessment Tool (SWAT), compare model performance using original and improved equations, and evaluate the ramifications of errors in watershed and tile drain simulation on prediction of NO₃‐N dynamics in wetlands. The modified equations produced Nash‐Sutcliffe Efficiency values of 0.88 to 0.99 for daily NO₃‐N load predictions, and percent bias values generally less than 6%. However, statistical improvement over the original equations was marginal and both old and new equations provided accurate simulations. The new equations reduce the model's dependence on detailed monitoring data and hydrologic calibration. Additionally, the modified equations increase SWAT's versatility by incorporating a weir equation and an irreducible nutrient concentration and temperature coefficient. Model improvements enhance the utility of SWAT for simulating flow and nutrients in wetlands and other impoundments, although performance is limited by the accuracy of inflow and NO₃‐N predictions from the contributing watershed. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Method for Rapidly Assessing the Overtopping Risk of Bridges Due to Flooding over a Large Geographic Region

Hydraulic events are a leading cause of bridge failures. While these hydraulic events are accounted for in bridge design, changing environmental and land use conditions require continual updating of this risk. For example, after a bridge has been constructed, streamflow can change in unanticipated ways as a result of land use changes, geomorphic changes, and climate change. The objective of this research was to create a screening method able to quickly and inexpensively estimate overtopping risk across a collection of bridges based on the current streamflow conditions. The method uses a geographic information system, nationally available and standardized datasets, and recent regression equations to quantify bridge vulnerability to overtopping for flooding with varying return periods. This screening method could also be used to assist decision makers in updating the Waterway Adequacy field in the National Bridge Inventory, which indicates the overtopping risk of bridges. The method was applied to a portion of the Hampton Roads region of Virginia, United States that includes 475 bridges. The results of the analysis, when combined with transportation data for bridges, aid decision makers to assign further resources to complete more detailed analyses of bridges identified as being at risk for overtopping.     

Modeling of water quality downgradient of a mulch biowall

Groundwater treatment biowalls may be located close to a surface water body to prevent contaminant discharge from a groundwater plume into the surface water. Groundwater contaminants passing through the biowall are treated within the biowall or immediately downgradient of the biowall. Biowalls designed and constructed for the treatment of chlorinated solvents typically contain either a solid and/or liquid source of organic carbon to promote contaminant degradation by enhanced anaerobic reductive dechlorination. Common solid organic materials in biowalls include wood mulch or similar waste plant material, and common liquid organic materials are vegetable oil (possibly emulsified) or other long‐chain fatty acids. Such biowalls then develop anaerobic conditions in the constructed biowall volume, and potentially downgradient, as dissolved oxygen originally present in the aquifer is consumed. This groundwater condition can lead to the appearance of sulfide if groundwater influent to the biowall contains moderate to high sulfate concentrations. Other researchers have presented evidence for groundwater conditions downgradient of a biowall or a permeable reactive barrier (PRB) that are altered in relation to groundwater quality, besides the desired effect of contaminant degradation or removal by precipitation. The objective of this work was to investigate with modeling the changes in downgradient groundwater species chemistry as a result of a constructed biowall. This was accomplished with a chemical species model to predict levels of sulfate and sulfide present in groundwater in close downgradient proximity to the biowall. The results indicate that downgradient chemical changes could impact a surface water body to which groundwater discharges. The model described could be enhanced by incorporating additional design variables that should be considered in biowall feasibility assessments.