Accumulation,biotransformation, and biochemical responses after exposure to arsenite and arsenate in the estuarine polychaete <Emphasis Type="BoldItalic">Laeonereis acuta</Emphasis> (Nereididae)

Introduction  

This study aimed to analyze antioxidant responses and oxidative damage induced by two inorganic forms of arsenic (As; As^III and As^V) in an estuarine polychaete species, Laeonereis acuta (Nereididae). The capacity of arsenic biotransformation was also evaluated through the methylation process considering the activity of a key enzyme involved in the metabolization process.     

Combined inverse modeling approach and load duration curve method for variable nitrogen total maximum daily load development in an agricultural watershed

Purpose  

Nonpoint sources (NPS) pollution has been an important cause for water quality impairment worldwide. To take the temporal variations of both NPS pollution and in-stream attenuation into consideration, an inverse modeling approach and the load duration curve (LDC) method were combined for variable nutrient total maximum daily load (TMDL) development.     

Uptake and distribution of metals by water lettuce (<Emphasis Type="Italic">Pistia stratiotes</Emphasis> L.)

Background, aim and scope  

Water quality impairment by heavy metal contamination is on the rise worldwide. Phytoremediation technology has been increasingly applied to remediate wastewater and stormwater polluted by heavy metals.     

Hexachlorocyclohexane (HCH) as new Stockholm Convention POPs��a global perspective on the management of Lindane and its waste isomers

Purpose

Hexachlorocyclohexane (HCH) isomers (??-, ??- and ??- (Lindane)) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention, and therefore, the legacy of HCH and Lindane production became a contemporary topic of global relevance. This article wants to briefly summarise the outcomes of the Stockholm Convention process and make an estimation of the amount of HCH waste generated and dumped in the former Lindane/HCH-producing countries.

Results

In a preliminary assessment, the countries and the respective amount of HCH residues stored and deposited from Lindane production are estimated. Between 4 and 7 million tonnes of wastes of toxic, persistent and bioaccumulative residues (largely consisting of alpha- (approx. 80%) and beta-HCH) are estimated to have been produced and discarded around the globe during 60 years of Lindane production. For approximately 1.9 million tonnes, information is available regarding deposition. Countries are: Austria, Brazil, China, Czech Republic, France, Germany, Hungary, India, Italy, Japan, Macedonia, Nigeria, Poland, Romania, Slovakia, South Africa, Spain, Switzerland, Turkey, The Netherlands, UK, USA, and former USSR. The paper highlights the environmental relevance of deposited HCH wastes and the related POPs?? contaminated sites and provides suggestions for further steps to address the challenge of the legacy of HCH/Lindane production.

Conclusion

It can be expected that most locations where HCH waste was discarded/stockpiled are not secured and that critical environmental impacts are resulting from leaching and volatilisation. As parties to the Stockholm Convention are legally required to take action to stop further POPs pollution, identification and evaluation of such sites are necessary.     

World poverty,another look

The World Bank used the Consumer Price Index (CPI) to calculate changes in the world poverty level (measured in U.S. dollars) prior to 1982. In 1983, the U.S. Bureau of Labor Statistics (BLS) replaced the CPI with several indices including CPI-W which was then adopted by the World Bank. This caused the inflated rate of the U.S. dollars and the percentage of the world population in poverty to be dramatically underestimated. This new incorrect procedure gives 25% (1.5 million) below the poverty line in 2005, while the more appropriate procedure (described herein) gives 52% (3.3 million in 2005). The rapid rise of the poverty line (using the preferable CPI) starting in 1987 occurred at nearly the same time as the peak in per capita annual cereal production.     

Pesticide use among smallholder rice farmers in Tanzania

In an interview study conducted among smallholder rice farmers in Rufiji, Tanzania coastal mainland, and in Cheju, Zanzibar, farmer??s pesticide use and risk awareness were assessed. The farmers generally lacked knowledge or possibilities to manage the pesticides as prescribed by the manufacturers. Few farmers knew what kind of pesticides they were using and had never seen the original packages, as pesticides were usually sold per weight or already diluted without labeling. Protective equipment was rarely used since they were not aware of risks associated with pesticides or did not know where to purchase protective gear. Only half of the farmers were aware of pesticides?? health hazards and few associated pesticides with environmental problems. The pesticide use was relatively low, but based on farmers?? pesticide handling and application practices, health risks were a major concern. Most farmers did not believe in successful rice cultivation without using pesticides to control pests. However, estimated yields did not differ between pesticide users or farmers using conventional methods or neem tree extract. To avoid negative effects on human health and the environment, the farmers need basic education and better assistance in their farming practices and pesticide management.     

Chitosan/albumin/CaCO3 as mimics for membrane bioreactor fouling: genesis of structural mineralized-EPS-building blocks and cake layer compressibility

Membrane bioreactor biofouling is usually described as an extracellular matrix in which biopolymers, inorganic salts and active microbes co-exist. For that reason, biomineralization (BM) models can be useful to describe the spatial organization and environmental constraints within the referred scenario. BM arguments were utilized as background in order to (1) evaluate CaCO₃ influence on flux decline; pore blocking and cake layer properties (resistance, permeability and compressibility) in a wide range of Chitosan/Bovine serum albumin (BSA) mixtures during step-pressure runs and, (2) perform membrane autopsies in order to explore the genesis of mineralized extracellular building blocks (MEBB) during cake layer build up. Using low molecular weight chitosan (LC) and BSA, 2 L of 5 LC/BSA mixtures (0.25-1.85 ratio) were pumped to an external ultra filtration (UF) membrane (23.5 cm², hydrophobic, piezoelectric, 100 kDa as molecular weight cut-off). Eight different pressure steps (40 ± 7 to 540 ± 21 kPa) were applied. Each pressure step was held for 900 s. CaCO₃ was added to LC/BSA mixtures at 0.5, 1.5 and 3 mM in order to create MEBB during the filtration tests. Membrane autopsies were performed after the filtration tests using thermo gravimetric, scanning microscopy and specific membrane mass (mg cm⁻²) analyses. Biopolymer-CaCO₃ step-pressure filtration created compressible cake layers (with inner voids). The formation of an internal skeleton of MEBB may contribute to irreversible fouling consolidation. A hypothesis for MEBB genesis and development was set forth.     

A national inventory to estimate release of polychlorinated dibenzo-p-dioxins and dibenzofurans in Portugal

Taking into account current environmental concerns, the main objective of this work focused a national inventory aiming to estimate the amount of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) released in Portugal in 2006. The methodology used was based on the Standardized Toolkit for Identification and Quantification of Dioxins and Furan Releases, developed by UNEP Chemicals, in 2005. The method allows the assessment of the amount of PCDD/PCDF released into the environment along five vectors involving air, water, land, products and residues. Facing some difficulties mainly regarding to the availability of data for some activities known to produce PCDD/PCDF, three scenarios (Sc1 to Sc3) corresponding to lower, central and upper estimates were established. The Sc1 scenario (lower estimate) includes the situations where in case of doubt or scarce information, reduced or none emission values were assumed, Sc2 refers to a central estimate, which is believed to be the most realistic for the Portuguese situation, while Sc3 corresponds to the worst case (upper estimate). The results obtained pointed out that the total amount of PCDD/PCDF emitted in Portugal during the period under analysis was in the range of 51.2-217.9 g TEQ year⁻¹, with the most likely value of 95.2 g TEQ year⁻¹ achieved under the Sc2 scenario. This study also showed that the methodology developed by UNEP Chemicals is a very simple one, and the main difficulty is the availability of data. The main indicators calculated in this study were 8.98 μg TEQ/(year person) by taking into account the total amount of PCDD/PCDF released, and 3.63 μg TEQ/(year person) when only air emissions were considered.     

Salinity increases mobility of heavy metals in soils

The effect of salinity induced by CaCl₂, MgCl₂, NaCl and Na₂SO₄ on the mobility of Cu, Cd, Pb and Zn was studied. An increase of ionic strength by any salts promoted a higher release of Cd than the others metals. When CaCl₂ and NaCl were applied, Cd and Pb showed the highest degree of mobilization. When MgCl₂ was applied, Cd and Cu were mobilized the most. Finally, an increase of Na₂SO₄ also promoted the strongest mobilization of Cd and Cu.As the total heavy metal content was higher, the percentage of Pb and Cu released upon salinization decreased, indicating that these metals are strongly bound to soil constituents. An increase of carbonates in the soil promoted a higher release of Pb for all used salts and for Zn when MgCl₂ and NaCl were used. This indicates that Pb and Zn are adsorbed on the surface of carbonate crystals. An increase of fine particles promoted a decrease of percentage of released Cd for all salts, indicating that Cd is strongly retained in the fine fractions.The main mechanism regulating Pb and Cd mobility was competition with Ca²⁺ for sorption sites followed for metal chloro-complexation, association between the Cd/Pb-sulfates and competition with Mg²⁺. The main mechanism regulating Cu mobility was the formation of Cu-sulfate, followed by competition with cations (Mg > Ca) and chloride. For Zn, competition with Ca²⁺ for sorption sites was the most important process for its mobility; followed by Zn-sulfate association and, finally, chloride and competition with Mg with the same effect.     

Biofilm responses to marine fish farm wastes

The changes in the biofilm community due to organic matter enrichment, eutrophication and metal contamination derived from fish farming were studied. The biofilm biomass, polysaccharide content, trophic niche and element accumulation were quantified along an environmental gradient of fish farm wastes in two seasons. Biofilm structure and trophic diversity was influenced by seasonality as well as by the fish farm waste load. Fish farming enhanced the accumulation of organic carbon, nutrients, selenium and metals by the biofilm community. The accumulation pattern of these elements was similar regardless of the structure and trophic niche of the community. This suggests that the biofilm communities can be considered a reliable tool for assessing dissolved aquaculture wastes. Due to the ubiquity of biofilms and its wide range of consumers, its role as a sink of dissolved wastes may have important implications for the transfer of aquaculture wastes to higher trophic levels in coastal systems.