方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.     

Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach

This paper describes a method for determining reductions of SO₂ emissions from coal- and oil-fired power stations, oil refineries and large industrial units in the UK taking into account their pollution potential. The method is based on the use of two gridded data sets: critical loads, which represent the sensitivity of the environment to acid deposition and modelled estimates of total (wet + dry) sulphur deposition for 646 point sources within the UK. An iterative method is used to identify and subsequently reduce emissions from point sources that contribute most to areas of critical loads exceedance. This paper demonstrates how the method may be used to determine an optimal allocation of emissions across the UK which yields the maximum amount of environmental protection per unit of emission.The paper then goes on to consider the changes that will have to take place within the UK power generation industry in order to meet the revised EC Large Combustion Plant Directive which comes into force on 1 January 2008. Particular emphasis is placed upon proposed emissions trading schemes and the environmental implications of allowing trading between stations with high and low pollution potentials. The paper concludes by suggesting that the emissions trading process should take into account the pollution potential of each source, irrespective of whether the proposed emission is within the plant's agreed emission limit. An approach based entirely on minimizing environmental damage rather than one which takes cost into account, as in current integrated assessment modelling, could provide an interesting approach across the rest of Europe.     

本溪市区环境空气质量现状及变化趋势

对本溪市的环境空气质量进行了监测分析，结果表明：本溪市环境空气中TSP超过国家环境空气质量二级标准，SO2、NOx、CO、降尘均符合二级标准。其中TSP、SO2、CO、降尘呈下降趋势，NOx变化不明显。     

海南琼北火山监测与研究

本文通过对海南琼北火山地区火山地质构造、地震活动背景分析，阐明了以马鞍岭——雷虎岭火山为代表的历史喷发形式、构造类型、岩浆流的范围以及流向，论述了琼北火山是一个较典型的城市火山，是一个处于休眠状态的具有喷发危险的火山，并通过国内外火山活动监测与分析方法的对比，确定海南琼北火山活动监测、应急措施与对策。     

半干法袋式除尘器净化垃圾焚烧烟气技术

本文介绍了绍兴新民热电有限公司利用“半干法＋袋式除尘器”工艺,处理垃圾焚烧烟气的情况,烟气经该工艺处理后,污染物浓度全部达到国家排放标准.     

大力开展清洁生产做好节能环保工作

在开展清洁生产过程中，江苏油田真武天然气集中处理站通过节约用水和冷量回收工艺的技术改造，减少了外排水，使水得到循环利用；能量得到很好的利用，增加了产品的产量，给企业增加了经济效益。     

上海市在用车推行I/M制度中检测方法的研究

对在用车实施I/M制度，采用底盘测功机模拟道路工况检测汽车排放污染物，按美国国家环保局（EPA）推荐的方法有3种：瞬态短工总法（IM240）、稳态加速模拟工况法（ASM）和瞬态短工部简易质量分析检测法（VMAS）。根据上海市的试验结果，对上述3种方法的检测精度、设备投资以及运行维护诸方面进行分析比较，阐明上海市采用VMAS方法的依据和应注意的问题，并对应采用的模拟道路工况提出了看法。     

稻、土及田水中锐劲特残留量分析方法

建立了新型杀虫剂锐劲特及其代谢物在水稻、土壤、田水中的气相色谱毛细管柱残留分析方法。该方法对锐劲特及其代谢物MB46513、MB45950、MB46136、RPA200766等，在水稻中的最低检出浓度依次为：0.002,0.001,0.001,0.004,0.01mg/kg；在土壤中这几种组分最低检出浓度为水稻中的1／3；在田水中最低检出浓度为水稻中的1／25。加标回收率83.4%-97.7%。变异系数1.86%-7.07%。