排污权交易之排放跟踪数据校核研究

本文以排污权交易的核心业务排放跟踪管理为出发点,选择电厂二氧化硫指标进行排放跟踪数据过程校核体系研究,探索进一步提高排污权交易体系中排放数据准确性的机制。     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718

The ball-end milling process is widely used for generating three-dimensional sculptured surfaces with definite curvature. In such cases, variation of surface properties along the machined surface curvatures is not well understood. Therefore, this paper reports the effect of machining parameters on the quality of surface obtained in a single-pass of a ball-end milling cutter with varying chip cross-sectional area. This situation is analogous to generation of free form cavities, pockets, and round fillets on mould surfaces. The machined surfaces show formation of distinct bands as a function of instantaneous machining parameters along the periphery of cutting tool edge, chip compression and instantaneous shear angle. A distinct variation is also observed in the measured values of surface roughness and micro-hardness in these regions. The maximum surface roughness is observed near the tool tip region on the machined surface. The minimum surface roughness is obtained in the stable cutting zone and it increases towards the periphery of the cutter. Similar segmentation was observed on the deformed chips, which could be correlated with the width of bands on the machined surfaces. The sub-surface quality analysis in terms of micro-hardness helped define machining affected zone (MAZ). The parametric effects on the machining induced shear and residual stresses have also been evaluated.     

Incorporating stakeholder decision support needs into an integrated regional Earth system model

A new modeling effort exploring the opportunities, constraints, and interactions between mitigation and adaptation at regional scale is utilizing stakeholder engagement in an innovative approach to guide model development and demonstration, including uncertainty characterization, to effectively inform regional decision making. This project, the integrated Regional Earth System Model (iRESM), employs structured stakeholder interactions and literature reviews to identify the most relevant adaptation and mitigation alternatives and decision criteria for each regional application of the framework. The information is used to identify important model capabilities and to provide a focus for numerical experiments. This paper presents the stakeholder research results from the first iRESM pilot region. The pilot region includes the Great Lakes Basin in the Midwest portion of the United States as well as other contiguous states. This geographic area (14 states in total) permits cohesive modeling of hydrologic systems while also providing strong gradients in climate, demography, land cover/land use, and energy supply and demand. The results from the stakeholder research indicate that, for this region, iRESM should prioritize addressing adaptation alternatives in the water resources, urban infrastructure, and agriculture sectors, including water conservation, expanded water quality monitoring, altered reservoir releases, lowered water intakes, urban infrastructure upgrades, increased electric power reserves in urban areas, and land use management/crop selection changes. For mitigation in this region, the stakeholder research implies that iRESM should focus on policies affecting the penetration of renewable energy technologies, and the costs and effectiveness of energy efficiency, bioenergy production, wind energy, and carbon capture and sequestration.     

Opportunities to reduce greenhouse gas emissions from households in Nigeria

Efforts to mitigate climate threats should not exclude the household as the household is a major driver of greenhouse gas (GHG) emissions through its consumption patterns. This paper derives an emission index that could be used to estimate inventories of carbon dioxide (CO₂) emissions from kerosene combustion for lighting in Nigeria and also looks at the implications of solar pv lighting replacing kerosene lamp in Nigeria. Findings indicate that (1) average CO₂ emissions from kerosene combustion for lighting in Nigeria is about 0.06 kg per hour per lamp, which can be taken as the kerosene lamp CO₂ emission index for Nigeria. (2) about 3 × 10W_p solar pv will be required to replace a kerosene lamp, while about 0.124 tonnes of CO₂ will be avoided per lamp per year, operating at 6 h daily. At the national level, under the kerosene lamp replacement projection assumptions made, between 0.4 and 1.0 million tonnes of CO₂ will be avoided per year. The household investment required to owe a solar pv, including the capital cost of switching from kerosene lamp, is about US356, while the national capital investment outlay is between 1,138.265 and US356, while the national capital investment outlay is between 1,138.265 and US2,848 million. (3) Certified Emission Reduction (CER) units, assuming CO₂ is traded, will generate significant annual revenues on the order of 6.96 to almost US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US6,300 million over the life span of the solar pv. The micro-economic assessment carried out indicates the non-attractiveness of solar pv use at the household level, and (4) to promote solar pv use, both long and short term policy measures that aim at cost reduction were suggested. The paper concludes that, factoring the suggested measures into the climate, energy, and financial policy decision discourse in Nigeria could empower the households to play a significant role in achieving global CO₂ emission reduction, but at the local level.     

销毁日本遗弃在华化学武器危险废物填埋场的安全选址

危险废物填埋场的安全选址是销毁日本遗弃在华化学武器工作中的一项重要的技术工作。本文依据我国环境保护的法律法规及标准,并采用科学的方法对危险废物填埋场址的选择进行了论述和评价,即:首先通过分析场址选择的影响因素,制定出科学、合理、可行的场址选择技术方案;然后再按优劣顺序对拟选的5个填埋场进行科学评价;最后选出最优的填埋场。     

The theory of planned behavior as mediator of the effect of parental supervision: a study of intentions to violate driving rules in a representative sample of adolescents

INTRODUCTION: The study reported here was designed to test the ability of the theory of planned behavior to mediate the effect of parental supervision on adolescents' intentions to violate driving rules. METHOD: A representative sample of 1,654 adolescents completed questionnaires during individual and anonymous interviews carried out at their schools. RESULTS: Results showed that age, gender, prior risky driving-behavior, and parental supervision significantly predict intentions to violate driving rules. Attitude and the subjective norm partially mediate the effect of age, prior behavior, and parental supervision. Perceived behavioral control does not predict intention and is not predicted by other variables. IMPACT: The results suggest that social cognitive variables partially mediate the effect of parenting practices such as supervision.     

Time allocation between work and recreation and the associated injury risks among young people

PROBLEM: The purpose of this study was to examine the relationship between overall risk of injury and time use patterns between work and active recreation among adolescents and young adults. METHODS: Using a representative sample of 9,795 Canadians aged 15-24 years, a multivariate logistic regression on the likelihood of any medically attended injury was conducted, including sociodemographic, individual, and time factors. RESULTS: Young people who engaged in a combination of high work and high activity hours were twice as likely to sustain a medically attended injury compared to those who worked low hours, but did not participate in any recreational activity. Those respondents who were not in school had a 43% increase in injury risk compared to full-time students. SUMMARY: Our findings suggest that injury risk was not a simple function of fatigue and cumulative exposure time. Our findings suggest the importance of considering time use and the associated injury risk tradeoffs. IMPACT ON INDUSTRY: Relevant to state and federal work safety policy makers, our findings suggest the importance of understanding where youth might otherwise spend their time if constraint were placed on their employment opportunities, and the associated injury risk tradeoffs must be taken into consideration.     

A juvenile lizard specimen with well-preserved skin impressions from the Upper Jurassic/Lower Cretaceous of Daohugou, Inner Mongolia, China

Lizards are now relatively well known from the Yixian Formation of northeastern China. In this study, we describe a juvenile lizard from a fossil horizon at Daohugou, Inner Mongolia. These beds predate the Yixian Formation, and are probably Late Jurassic or earliest Cretaceous in age. The new specimen thus documents the first lizard material from the Daohugou locality and is the earliest lizard skeleton from China. Comparisons with developmental stages of modern lizards suggest the Daohugou lizard is a hatchling. Although tiny, the specimen is notable in preserving exquisite skin impressions showing the variation in scalation across the body, the shape and position of the cloacal outlet, and details of the manus and pes. These are the earliest recorded lepidosaurian skin traces. In its general proportions and the possession of paired frontals, the small Daohugou lizard resembles both the Yixian taxon Yabeinosaurus tenuis and the questionable Jeholacerta formosa, but it differs from the latter in scalation and, based on other characters, may be distinct from both.     

Rollover injury: effects of near- and far-seating position, belt use, and number of quarter rolls

PURPOSE: Vehicle and occupant responses in rollovers are complex since many factors influence both. This study analyzes the following factors: 1) belt use, 2) seated position with respect to the lead side in the rollover, 3) another front occupant in the crash, and 4) number of quarter rolls. The aim was to improve our understanding of rollover injury mechanisms. METHOD: Rollover accidents were analyzed using 1992-2004 NASS-CDS data. The sample included adult drivers and right-front passengers. All occupants were evaluated and then a subset of non-ejected occupants was analyzed. Using roll direction and seating position, the sample was divided into near- and far-seated occupants. Injury and fatality risks were determined by seatbelt use, occupancy, rollover direction, and number of quarter rolls. Risk was defined as the number of injured (e.g., MAIS 3+) divided by the number of exposed occupants (MAIS 0-6). Significance in differences was determined. A matched-pair analysis was used to determine the risk of serious injury for near- and far-seated occupants who were either belted or unbelted in the same crash. RESULTS: For all occupants, serious injury risks were highest for far-seated, unbelted occupants at 18.1% +/- 4.8%, followed by near-seated unbelted occupants at 12.0% +/- 3.5%. However, the difference was not statistically significant. Belted near- and far-seated occupants had a similar injury risk of 4.3% +/- 1.2% and 4.0% +/- 1.2%, respectively. For non-ejected occupants, serious injury risk was 9.5% +/- 3.2% for far-seated unbelted occupants and 4.9% +/- 2.1% for near-seated unbelted occupants, not a statistically significant difference. Serious injury risk was similar for belted near- and far-seated non-ejected occupants, at 3.6% +/- 1.1%. Seatbelts were 64.2%-77.9% effective in preventing serious injury for all occupants and 62.1%-26.5% for far- and near-seated, non-ejected occupants, respectively. Based on the matched pairs, seatbelts were less effective for near-seated (5.0%) compared to far-seated (2.8%) occupant MAIS 3+F risks. This was similar for non-ejected occupants. An unbelted near-seated occupant increased the risk for a belted far-seated occupant by 2.2 times, whereas an unbelted far-seated occupant increased the risk for a belted near-seated occupant by 10.2 times. For all occupants, the risk of serious injury increased with the number of quarter rolls, irrespective of seated position. For near-seated occupants, seatbelt effectiveness was higher in < or =1 roll than 1+ roll, at 72.3% compared to 28.3%. For far-seated occupants, seatbelt effectiveness was similar in < or =1 and 1+ roll samples at 78.3% and 76.8%, respectively. Near-seated occupants had the lowest serious injury risk when they were the sole occupant in the vehicle. This was also true for non-ejected occupants. However, far-seated occupants had a lower injury risk when another occupant was involved in the crash. CONCLUSIONS: The effect of carrying another occupant appears to reduce the risk of serious injury to far-seated occupants. However, near-seated occupants are better off being the sole occupant in the vehicle. Seatbelt effectiveness was lowest at 28.3% for non-ejected, near-seated occupants in 1+ rolls. This finding deserves further evaluation in an effort to improve seatbelt effectiveness in rollovers. For belted drivers alone in a rollover, fatality risks are 2.24 times higher for the far- versus near-seated position. Analysis of rollovers by quarter turns indicates that occupants are both far-side and near-side in rollovers. The extent to which this confounds the relationship between roll direction, seating position, and injury risk is unknown.