部分取代苯类在江水中的生物降解与结构相关性研究

测定了２７种取代苯类化合物在松花江江水中的生物降解性．采用量子化学ＭＯＰＡＣ６．０－ＡＭ１法计算了化合物的分子量(ＭＷ)、生成热(Ｈｆ)、分子总表面积(ＴＳＡ)及最高占有轨道能(ＥＨＯＭＯ),结合辛醇/水分配系数ｌｇｐ及酸解离常数ｐＫａ对其中２２种化合物的ＢＯＤ值进行多元线性回归分析,得到如下模型:ＢＯＤ＝１０５．７３－０．４３９ＭＷ－０．０７６Ｈｆ－６．６６０ｌｇＰｎ＝２２,Ｒ２＝０．８２１,ＳＥ＝８．２５０,Ｆ＝２７．５６,Ｐ＝０．０００应用所得模型对其余５个化合物的生物降解性进行了预测．只有一个化合物的相对预测误差大于２０%,为２０．８%．平均预测误差为１２．４%．     

底泥中多环芳烃(PAHs)提取方法评析

总结了底泥中多环芳烃(PAHs)提取的处理流程和国内外多种提取方法,比较了几种在我国较为常用的提取方法的效率.同时还提出了PAHs分离纯化的方法和步骤,并指出了提取过程中影响实验回收率的几个因素.     

Reproduction in Anthelia glauca (Octocorallia: Xeniidae). I. Gametogenesis and larval brooding

Anthelia glauca Lamarck, 1816 is a gonochoric, external-brooding soft coral found in KwaZulu-Natal. It is reproductively active in the summer months. The development of gametes produced in late summer is arrested in winter. Several stages of gametes are found at the base of the polyps, and female polyps produce several cycles of larvae over an extended breeding period of 4 to 5 months. Larvae are brooded in a unique pharyngeal brooding pouch not yet described in other coral species. The brood pouch consists of an expansion of the pharynx with constrictions proximal and distal to the embryos and larvae. Our data suggest that egg transfer and fertilization occur at full moon and the mature larvae are released after new moon. Zooxanthellae are absent in A. glauca oocytes, but zooxanthella infestation commences at the immature larval stage. Received: 15 July 1997 / Accepted: 12 March 1998     

Statistical Analysis of Air Pollutants and Meteorological Parameters in Afyon, Turkey

In this study, the relation between sulfur dioxide (SO₂) and particulate matter (PM) concentrations periodically measured in the city of Afyon’s atmosphere with meteorological factors such as precipitation, humidity, temperature, wind velocity, and inversion were investigated. The mean values of SO₂ and PM concentrations measured during the winter months of October–March 1990–1999 were correlated with the meteorological parameters of the same period. Simple and multiple linear regression analysis were utilized to evaluate the contribution of meteorological variables. The statistical results show that the pollutants, i.e., SO₂ and PM are dependent upon humidity, temperature, and inversion at the 1% significance level; while the dependence of both pollutants with temperature is negative when those of humidity and inversion are positive. Two models in which temperature and inversion are dependent with multiple variables are recommended for predicting the contribution of meteorological parameters on SO₂ and PM. In addition, the relationship between humidity, temperature, and inversion with pollutants is also determined using nonlinear (polynomial) models.     

IFTCIP: An Integrated Optimization Model for Environmental Management under Uncertainty

In this study, an interval-fuzzy two-stage chance-constrained integer programming (IFTCIP) method is developed for supporting environmental management under uncertainty. The IFTCIP improves upon the existing interval, fuzzy, and two-stage programming approaches by allowing uncertainties expressed as probability distributions, fuzzy sets, and discrete intervals to be directly incorporated within a general mixed integer linear programming framework. It has advantages in uncertainty reflection, policy investigation, risk assessment, and capacity-expansion analysis in comparison to the other optimization methods. Moreover, it can help examine the risk of violating system constraints and the associated consequences. The developed method is applied to the planning for facility expansion and waste-flow allocation within a municipal solid waste management system. Violations of capacity constraints are allowed under a range of significance levels, which reflects tradeoffs between the system cost and the constraint-violation risk. The results indicate that reasonable solutions for both binary and continuous variables have been generated under different risk levels. They are useful for generating desired decision alternatives with minimized system cost and constraint-violation risk under various environmental, economic, and system-reliability conditions. Generally, willingness to take a higher risk of constraint violation will guarantee a lower system cost; a strong desire to acquire a lower risk will run into a higher system cost.     

Determination of total Cr in wastewaters of Cr electroplating factories in the I.organize industry region (Kayseri, Turkey) by ICP-AES

The wastewater pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium pollution in the wastewater sources from electroplating, dyeing, and tannery, has affected the life on earth. This pollution can affect on all ecosystems and human health directly or by food chain. Therefore, the determination of total chromium in this study is of great importance. In this study, accurate, rapid, sensitive, selective, simple, and low-cost technique for the direct determination of total Cr in wastewater samples collected from the some Cr electroplating factories in March 2008 by inductively coupled plasma-atomic emission spectrometry has been developed. The analysis of a given sample is completed in about 15 min by this technique applied. As the result of the chromium analysis, the limit of quantification for the total Cr were founded to be over the limit value (0.05 mg L^???1; WHO, EPA, TSE 266, and inland water quality classification) as 1,898.78 ± 0.34 mg/L at station 1 and 3,189.02 ± 0.56 mg/L at station 2. The found concentration of total Cr has been determined to be IV class quality water according to the inland water classification. In order to validate the applied method, recovery studies were performed.     

Migration of natural estrogens around a concentrated dairy-feeding operation

Concentrated animal feeding operations have been recognized as one of the most important contributors of natural estrogens which show significant endocrine-disrupting properties in aquatic environments. In this study, the concentrations of 17α-estradiol (17α-E2), 17β-estradiol (17β-E2), estrone (E1), and estriol (E3) in several matrices, including soils (surface and deep), sediments (surface and deep), and groundwaters, around a typical dairy farm were surveyed using gas chromatography/mass spectrometry. Of the two farmlands, surface and subsurface sediments in waste lagoon and along effluent drainage drench, the concentrations of 17α-E2, 17β-E2, and E1 ranged from below detection limit to the highest level of 6.60 μg/kg, except that E3 was not detectable. Three estrogens of 17α-E2, 17β-E2, and E1 with the concentrations of 3.18-31.61 ng/L were observed in two groundwater samples. The results clearly demonstrated the vertical migration and horizontal transport of estrogens in the investigated area. Within 750-m distance, it was observed the attenuation of 17α-E2, 17β-E2, and E1 along the effluent route and the horizontal migration of estrogens was less than 1,350 m in this survey.     

Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.