Study of fluxing in Al refining process by rotary and crucible furnaces

The process used to obtain recycled Al alloys depends on the scrap quality. Rotary furnaces are normally used in Europe as they allow a great productivity and they can process low quality scrap using a salt flux to protect the molten metal from oxidation. In this article, the effect of the quantity of salt on the metal recovery has been experimentally investigated by melting several types of scrap under a mixture of NaCl–KCl–Na₃AlF₆ salts. The quantity of salt has been related to the salt factor (SF), which is the ratio between the non-metallic content in the scrap and the quantity of salt required. The same levels of salt factor have been tested by melting the scrap in rotary and crucible furnaces. The metal recovery increases with the salt content for both furnaces. The results obtained with the different melting processes are comparable because the yield difference is similar considering different salt factors. Crucible furnace gives greater metal recovery but it cannot replace rotary furnace in Al refining industry due to lower melting capacity. However, the results highlight that the optimisation of the Al refining process can be supported by preliminary tests through crucible furnaces reducing the time and material consumptions.     

Food web of a confined and anthropogenically affected coastal basin (the Mar Piccolo of Taranto) revealed by carbon and nitrogen stable isotopes analyses

Carbon and nitrogen stable isotope analysis was used to examine the food web of the Mar Piccolo of Taranto, a coastal basin experiencing several anthropogenic impacts. Main food sources (algal detritus, seaweeds, particulate organic matter (POM) and sediment organic matter (SOM)) and benthic and pelagic consumers were collected during two contrasting seasons (June and April), at four sites distributed over two inlets, and characterized by different level of confinements, anthropogenic inputs and the presence of mussels farming. δ¹³C values of organic sources revealed an important contribution of POM to both planktonic and benthic pathways, as well as the influence of terrigenous inputs within both inlets, probably due to high seasonal land runoff. Although δ¹³C of both sources and consumers varied little between sampling sites and dates, δ¹⁵N spatial variability was higher and clearly reflected the organic enrichment in the second inlet as well as the uptake of anthropogenically derived material by benthic consumers. On the other hand, within the first inlet, the isotopic composition of consumers did not change in response to chemical contamination. However, the impact of polluted sediments near the Navy Arsenal in the first inlet was detectable at the level of the macrobenthic trophic structure, showing high dominance of motile, upper level consumers capable to face transient conditions and the reduction of the more resident deposit feeders. We therefore underline the great potential of matching stable isotope analysis with quantitative studies of community structure to assess the effects of multiple anthropogenic stressors.     

Land degradation,economic growth and structural change: evidences from Italy

The present study investigates the relationship between land degradation and the evolution of the productive structure in Italy during the last 50 years (1960–2010). The objectives of the study are twofold: (i) to present and discuss an original analysis of the income–environment relationship in an economic-convergent and environmental–divergent country and (ii) to evaluate the impact of the (changing) productive structure and selected socio-demographic characteristics on the level of land vulnerability. The econometric analysis indicates that the relationship between GDP and land degradation across Italian provinces is completely reverted once we move from a cross-sectional analysis to panel estimates. While economic and environmental disparities between provinces go in the same direction, with richer provinces having lower levels of LD, over time the growth process increases LD with the economic structure acting as a significant variable.     

Feeding current characteristics of three morphologically different bivalve suspension feeders, Crassostrea gigas, Mytilus edulis and Cerastoderma edule, in relation to food competition

Introduced Pacific oysters (Crassostrea gigas) have shown rapid expansion in the Oosterschelde estuary, while stocks of native bivalves declined slightly or remained stable. This indicates that they might have an advantage over native bivalve filter feeders. Hence, at the scale of individual bivalves, we studied whether this advantage occurs in optimizing food intake over native bivalves. We investigated feeding current characteristics, in which potential differences may ultimately lead to a differential food intake. We compared feeding currents of the invasive epibenthic non-siphonate Pacific oyster to those of two native bivalve suspension feeders: the epibenthic siphonate blue mussel Mytilus edulis and the endobenthic siphonate common cockle Cerastoderma edule. Inhalant flow fields were studied empirically using digital particle image velocimetry and particle tracking velocimetry. Exhalant jet speeds were modelled for a range of exhalant-aperture cross-sectional areas as determined in the laboratory and a range of filtration rates derived from literature. Significant differences were found in inhalant and exhalant current velocities and properties of the inhalant flow field (acceleration and distance of influence). At comparable body weight, inhalant current velocities were lower in C. gigas than in the other species. Modelled exhalant jets were higher in C. gigas, but oriented horizontally instead of vertically as in the other species. Despite these significant differences and apparent morphological differences between the three species, absolute differences in feeding current characteristics were small and are not expected to lead to significant differences in feeding efficiency.     

Investigation of ZnO nanoparticles’ ecotoxicological effects towards different soil organisms

Introduction  

Nanomaterials have widespread applications in several industrial sectors. ZnO nanoparticles (NPs) are among the most commonly used metal oxide NPs in personal care products, coating and paints. However, their potential toxicological impact on the environment is largely unexplored.     

Fingerprinting and Groundwater Model Application to Evaluate Hydraulic Barrier Efficiency (Italy)

Remediation actions at contaminated sites are based on multiple numerical model scenarios considering different parameter distributions, source positions and contaminant transport paths. In some cases the excess of scenarios is due to uncertainties in the conceptual model as a result of the spread of contamination through heterogeneities in the physical system. Reduction of project hypotheses and conceptual model uncertainty is therefore needed. This result can be achieved by coupling hydrogeological investigations with environmental forensic techniques, better localization of the source and understanding of contamination history. In this respect, in the present study, compositional fingerprinting and groundwater flow modeling were applied to a former oil storage facility where, even though a hydraulic barrier had been built to stop the hydrocarbon plume, the presence of some hydrocarbons was still found in downgradient monitoring wells. The final aim was to evaluate the efficacy of the hydraulic barrier and identify of the source of pollution. Fingerprinting results indicated pollution with a gasoline-diesel mixture much altered by water washing and/or biodegradation. Comparison of seven groundwater samples collected in wells and monitoring wells was performed by analyzing the volatile fraction (BTEX) and the total ion chromatogram (TIC), focusing attention on: n-alkanes (m/z 85), alkylcyclohexanes (m/z 83), isoprenoids (m/z 113), C4-alkylbenzenes (m/z 134), C3-C6 alkylbenzenes and polycyclic aromatic hydrocarbons (PAHs). The most probable scenario was then identified by combining the results of fingerprinting with different contaminant paths obtained using the numerical model.     

The use of multilevel sampling techniques for determining shallow aquifer nitrate profiles

Nitrate is a worldwide pollutant in aquifers. Shallow aquifer nitrate concentrations generally display vertical stratification, with a maximum concentration immediately below the water level. The concentration then gradually decreases with depth. Different techniques can be used to highlight this stratification. The paper aims at comparing the advantages and limitations of three open hole multilevel sampling techniques (packer system, dialysis membrane samplers and bailer), chosen on the base of a literary review, to highlight a nitrate vertical stratification under the assumption of (sub)horizontal flow in the aquifer. The sampling systems were employed at three different times of the year in a shallow aquifer piezometer in northern Italy. The optimal purge time, equilibration time and water volume losses during the time in the piezometer were evaluated. Multilevel techniques highlighted a similar vertical nitrate stratification, present throughout the year. Indeed, nitrate concentrations generally decreased with depth downwards, but with significantly different levels in the sampling campaigns. Moreover, the sampling techniques produced different degrees of accuracy. More specifically, the dialysis membrane samplers provided the most accurate hydrochemical profile of the shallow aquifer and they appear to be necessary when the objective is to detect the discontinuities in the nitrate profile. Bailer and packer system showed the same nitrate profile with little differences of concentration. However, the bailer resulted much more easier to use.

     

Co-production of hydrogen and electricity with CO2 capture

Electricity and hydrogen can be used as energy carriers to reduce emissions of CO₂ from small and mobile energy users. One of the most promising technologies for the production of electricity and hydrogen with low CO₂ emissions is coal gasification with CO₂ capture and storage. Performance and cost data are presented for plants which produce electricity and hydrogen alone and plants which co-produce both of these energy carriers. The co-production plants include plants which produce a fixed ratio of hydrogen to electricity and plants which are able to vary the ratio while continuing to operate the gasification and CO₂ capture parts of the plant at full load. The paper also assesses the ability of these types of plants to satisfy the varying demands for hydrogen and electricity in future energy supply systems. The lowest cost option for the scenarios assessed in the paper is the use of flexible co-production plants with underground buffer storage of hydrogen.     

Uranium groundwater anomalies and L'Aquila earthquake, 6th April 2009 (Italy)

Monitoring of chemical and physical groundwater parameters has been carried out worldwide in seismogenic areas with the aim to test possible correlations between their spatial and temporal variations and strain processes. Uranium (U) groundwater anomalies were observed during the preparation phases of the recent L'Aquila earthquake of 6th April 2009 in the cataclastic rocks near the overthrust fault crossing the deep underground Gran Sasso National Laboratory. The results suggest that U may be used as a potential strain indicator of geodynamic processes occurring before the seismic swarm and the main earthquake shock. Moreover, this justifies the different radon patterns before and after the main shock: the radon releases during and after the earthquake are much than more during the preparatory period because the process does not include only the microfracturing induced by stress-strain activation, but also radon increases accompanying groundwater U anomalies.