Detectability of the Eurasian otter by standard surveys: an approach using marking intensity to estimate false negative rates

False negative detections may bias the surveys for rare species and reduce the reliability of models based on the proportion of occupied patches. We assessed the detectability of the Eurasian otter Lutra lutra through the standard survey method by analysing the detection history of 28 sampling stretches surveyed monthly between March 2001 and January 2003. Each survey negative for otter spraints was considered as a false negative if the otter had been recorded in the previous and/or following month (respectively, cFN and FN). Otter marking intensity (MI) (MI=N° of spraints per kilometre) was calculated and assumed to represent an index of its relative abundance. Spraints were found in 81.7% of all surveys. Yearly MI ranged from 1.02 to 101.4 spraints per kilometre. In 2002, mean MI was significantly lower than in the previous year, while no clear seasonal trend could be outlined. The minimum number of surveys required to establish the occurrence of the otter, as estimated by a probability model, was 2.6 and was inversely related to MI. For a sub-sample of 18 sampling stretches, the relation between the frequency of both cFN and FN and five variables of potential interest for otters was tested by means of stepwise linear multiple regressions, yielding two highly significant models, which both included only MI as the explanatory variable. The frequency of both FN and cFN was correlated to MI and the resulting equations used to assess the percentage of surveys positive for otters in both years. After the correction for non-detections, otter site occupancy did not vary between the 2 years, except for one river when applying the more conservative estimate of false negatives (cFN). Multiple visits and the assessing of MI should become standard components of otter surveys. This approach has broad applicability and may be applied to assess the large-scale distribution of other rare or elusive mammalian carnivores.     

Evaluating carbon emissions of China’s waste management strategies for building refurbishment projects: contributing to a circular economy

This study evaluates carbon emissions of construction and demolition (C&D) waste generated by building refurbishment, using a life cycle assessment approach through a case study project in China. Three waste management scenarios were developed for a building refurbishment project in the city of Suzhou. Scenario 1 is under the business-as-usual C&D waste management practice in China; scenario 2 is based on the open-ended 3R strategy, which focuses on the downstream impact of waste; and scenario 3 considers both the upstream and downstream impact of waste. The results reveal that the composition of the waste generated from building refurbishment projects is different from construction and demolition projects. In the life cycle of C&D waste management of building refurbishment projects, the refurbishment material stage generates the highest carbon emissions compared to the dismantlement, refurbishment construction, and refurbishment material end of life stages. Scenario 1 produces higher carbon emissions than scenario 2, but the difference is not significant in the whole life cycle of the building refurbishment project, whereas carbon emissions for scenario 3 are significantly less than both scenario 1 and scenario 2. The study finds the reason for this difference is that scenario 1 and scenario 2 are based on a linear economy that relies on unsustainable demand for raw materials, whereas scenario 3 is based on a circular economy that uses upcycled materials to substitute for raw materials and considers waste management from a cradle to cradle perspective. This study fills a research gap by evaluating carbon emissions of different waste management strategies for building refurbishment projects, which are expected to be an increasing portion of overall construction activity in China for the foreseeable future.

     

Embryo/larval toxicity and transcriptional effects in zebrafish (Danio rerio) exposed to endocrine active riverbed sediments

Environmental Science and Pollution Research - Sediment toxicity plays a fundamental role in the health of inland fish communities; however, the assessment of the hazard potential of contaminated...     

Endocrine-disrupting chemicals in coastal lagoons of the Po River delta: sediment contamination,bioaccumulation and effects on Manila clams

The large estuary that the River Po forms at its confluence into the Adriatic Sea comprises a multitude of transitional environments, including coastal lagoons. This complex system receives the nutrients transported by the River Po but also its load of chemical contaminants, which may pose a substantial (eco)toxicological risk. Despite the high ecological and economic importance of these vulnerable environments, there is a substantial lack of information on this risk. In light of the recent amendments of the European Water Framework Directive (2013/39/EU), the present study investigated the sediment contamination of six coastal lagoons of the Po delta and its effects on Manila clams (Ruditapes philippinarum), exposed in situ for 3 months. Sediment contamination and clam bioaccumulation of a wide range of chemicals, i.e. trace metals (Cd, Cr, Ni, Hg, Pb, As), polybrominated diphenyl ethers (PBDEs), alkylphenols (APs), organochlorine compounds (PCBs, DDTs), polycyclic aromatic hydrocarbons (PAHs) and organotins (TPhT, TBT), suggested a southward increase related to the riverine transports. Where the River Po influence was more direct, the concentrations of contaminants were higher, with nonylphenol and BDE-209 exceeding sediment quality guidelines. Biometric indicators suggested the influence of contamination on organism health; an inverse relationship between PBDEs in sediments and clam condition index has been found, as well as different biota-sediment accumulation factors (BSAFs) in the lagoons.     

The role of physical processes controlling the behaviour of radionuclide contaminants in the aquatic environment: a review of state-of-the-art modelling approaches

This paper is aimed at presenting and discussing the methodologies implemented in state-of-the-art models for predicting the physical processes of radionuclide migration through the aquatic environment, including transport due to water currents, diffusion, settling and re-suspension. Models are briefly described, model parameter values reviewed and values recommended. The different modelling approaches are briefly classified and the advantages and disadvantages of the various model approaches and methodologies are assessed.     

Efficacy and reliability of upgraded industrial treatment plant at Porto Marghera, near Venice, Italy, in removing nutrients and dangerous micropollutants from petrochemical wastewaters

Chemical and petrochemical wastewaters contain a host of contaminants that require different treatment strategies. Regulation of macropollutants and micropollutants in the final discharge from industrial wastewater treatment plants (WWTPs) have become increasingly stringent in recent decades, requiring many WWTPs to be upgraded. This article presents an analysis of a WWTP treating petrochemicals in Porto Marghera, Italy, that recently was upgraded following legislative changes. Because of strict legal limits for macropollutants and micropollutants and a lack of space necessary for a full-scale WWTP overhaul, the existing activated sludge tank was converted into a membrane biological reactor. The paper presents experimental data collected during a five-month investigation showing the removal rates achieved by the upgraded plant for macropollutants (particularly nitrogen compounds) and micropollutants (heavy metals and organic and inorganic toxic compounds).     

Use of vitrified MSWI bottom ashes for concrete production

Bottom ashes from a north Italian municipal solid waste incinerator (MSWI) were vitrified at 1450 degrees C without adding any vitrifying agent, then ground and sieved to different granulometry (ranging from 50 microm to 20mm), and used as filler, sand, or aggregate for concrete. Samples were characterized via slump tests (UNI 9418), alkali-silica reactivity (UNI 8520/22 and ASTM C 298), and compression strength tests (UNI 6132, 6132/72, 6686/72), and compared to reference samples obtained without vitrified bottom ashes (VBA). Our results show that vitrified bottom ashes are unsuitable as a sand substitute; however, concrete containing up to 20 wt.% of VBA filler used as a substitute for cement and up to 75 vol.% of VBA as a substitute for natural aggregate retains the same mechanical properties as reference samples. Alkali-silica or other detrimental reactions were not observed in VBA-containing concrete samples after a period of two years. The results of this work demonstrate that vitrified bottom ashes from MSWI can be used instead of natural aggregates in mortar and concrete production.