High fire resistance in blocks containing coal combustion fly ashes and bottom ash

Fire resistance recycled blocks, containing fly ash and bottom ash from coal combustion power plants with a high fire resistance, are studied in this paper by testing different compositions using Portland cement type II, sand, coarse aggregate and fly ash (up to 50% of total weight) and bottom ash (up to 30% of total weight). The fire resistance, physical-chemical (density, pH, humidity, and water absorption capacity), mechanical (compressive and flexural strength), and leaching properties are measured on blocks made with different proportions of fly ash and bottom ash. The standard fire resistance test is reproduced on 28 cm-high, 18 cm-wide and 3 cm-thick units, and is measured as the time needed to reach a temperature of 180 °C on the non-exposed surface of the blocks for the different compositions.The results show that the replacement of fine aggregate with fly ash and of coarse aggregate with bottom ash have a remarkable influence on fire resistance and cause no detriment to the mechanical properties of the product. Additionally, according to the leaching tests, no environmental problems have been detected in the product. These results lead to an analysis of the recycling possibilities of these by-products in useful construction applications for the passive protection against fire.     

Somatic and population growth responses of Ceriodaphnia dubia and Daphnia pulex (Cladocera) to changes in food (Chlorella vulgaris) level and temperature

We quantified the combined effects of three food levels (0.01 x 10(6), 0.1 x 10(6) and 1.0 x 10(6) cells ml(-1)) and three temperature levels (15, 20 and 25 degrees C) on the somatic and the clonal population growth of two cladocerans Ceriodaphnia dubia and Daphnia pulex for 24 to 42 days. The somatic growth data showed that both the cladoceran species began to increase their body size within 3 days and remained stable beyond a week. Food density had a significant effect on the body size of C. dubia while for D. pulex, food level and temperature as well as their interaction had significant effect on the body size. The population growth of both the cladoceran species was affected by temperature. At 15 degrees C, C. dubia showed little growth at the highest food density, while at low food level, there was some increase in the population abundances, especially after a long lag phase of about 2 weeks. At 15 degrees C and under the lowest tested food level, the population of D. pulex did not increase beyond the inoculation density. Optimal population growth of D. pulex was observed at intermediate temperature and at 1.0 x 10(6) cells ml(-1) of food level while for C. dubia 25 degrees C and the highest food level yielded highest growth. At low food level and low temperature, the rate of population increase (r) of C. dubia was much lower than that of D. pulex at comparable conditions. On the hand, at higher food levels and temperature regimes, the r of D. pulex was much higher than that of C.dubia. Regardless of the food levels and temperature, the r of C. dubia varied from 0.03 to 0.07 while that of D. pulex varied from 0.01 to 0.08 day(1).     

Removal of aldrin, dieldrin, heptachlor, and heptachlor epoxide using activated carbon and/or Pseudomonas fluorescens free cell cultures

Degradation of aldrin (1,2,3,4,10,10-Hexachloro-1,4,4a,5,8,8a-hexahydro-1,4:5-8-dimethanonaphthalene), heptachlor (1H-1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-4,7-methano indene), dieldrin (1aalpha,2beta,2aalpha,3beta,6beta,6aalpha,7beta,7aalpha)-3,4,5,6,9,9-Hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-2,7:3,6-d-methanonaphtha[2,3-b]oxirene, and heptachlor epoxide (1aalpha, 1bbeta,2alpha,5alpha,5alphabeta,6beta,6aalpha-2,3,4,5,6,7,7-Heptachloro-1a,1b,5,5a,6,6a-hexahydro-2,5-methano-2H-inden[1,2-b]-oxirene) was tested using free cultures of Pseudomonas fluorescens under controlled conditions. Pesticide concentrations were monitored by gas chromatography during 120 h. Percentages of degradation and biodegradation rates (BDR) were calculated. Data showed a trend suggesting a relation between chemical structure and degradability. Degradation kinetics for each pesticide tested showed that the highest degradation rates were found in the first 24 h. Kinetics data were adjusted to an empirical equation in order to predict their behavior, and the correlation coefficients obtained were satisfactory. Gas chromatography/mass spectrometry (GC/MS) analysis of the final extracts allowed the identification of chlordene and monodechlorodieldrin, which have been reported as final metabolite produced in the biodegradation of this kind of compounds. Regarding adsorption of pesticides on activated vegetal carbon, we concluded that removal efficiencies between 95.45 and 97.18% can be reached, depending on the pesticide and the carbon dose applied. The values for K from the Freundlich equation were quite similar for the four pesticides (between 1.0001 and 1.04), whereas the n values were quite different for each pesticide in the following order of affinity: dieldrin > aldrin > heptachlor epoxide > heptachlor. Equilibrium times, very important for scaling up the process, were between 43 min and 1 h, for the heptachlor epoxide and the heptachlor, respectively.     

Modelling radionuclide transport for time varying flow in a channel network

Water flowrates and flow directions may change over time in the subsurface for a number of reasons. In fractured rocks flow takes place in channels within fractures. Solutes are carried by the advective flow. In addition, solutes may diffuse in and out of stagnant waters in the rock matrix and other stagnant water regions. Sorbing species may sorb on fracture surfaces and on the micropore surfaces in the rock matrix. We present a method by which solute particles can be traced in flowing water undergoing changes in flowrate and direction in a complex channel network where the solutes can also interact with the rock by diffusion in the rock matrix. The novelty of this paper is handling of diffusion in the rock matrix under transient flow conditions. The diffusive processes are stochastic and it is not possible to follow a particle deterministically. The method therefore utilises the properties of a probability distribution function for a tracer moving in a fracture where matrix diffusion is active. The method is incorporated in a three dimensional channel network model. Particle tracking is used to trace out a multitude of flowpaths, each of which consists of a large number of channels within fractures. Along each channel the aperture and velocity as well as the matrix sorption properties can vary. An efficient method is presented whereby a particle can be followed along the variable property flowpath. For stationary flow conditions and a network of channels with advective flow and matrix diffusion, a simple analytical solution for the residence time distribution along each pathway can be used. Only two parameter groups need to be integrated along each path. For transient flow conditions, a time stepping procedure that incorporates a stochastic Monte-Carlo like method to follow the particles along the paths when flow conditions change is used. The method is fast and an example is used for illustrative purposes. It is exemplified by a case where land rises due to glacial rebound. It is shown that the effects of changing flowrates and directions can be considerable and that the diffusive migration in the matrix can have a dominating effect on the results.     

Agro-environmental sustainability assessment using multicriteria decision analysis and system analysis

Transparency and reproducibility remain challenges for sustainability assessment, particularly in developing world contexts where formal scientific information is often limited. We posit that even in such contexts, sustainability assessment can be productive and informative if the underlying assumptions about sustainability are made transparent. Thus, the process of assessment can be as instructive as the results, if not more so. In this article, we describe and discuss how we combined multicriteria decision analysis and system analysis as a unified approach to sustainability assessment. This approach is transparent, practical, flexible, and reproducible; it also facilitates the development of recommendations for enhancing sustainability. We illustrate the approach with examples from a recent environmental sustainability assessment of irrigated commercial maize production in Sinaloa, Mexico.     

On the relationship between acid rain and cloud type

Spanish European Monitoring and Evaluation Programme (EMEP) stations were selected to relate acid rain episodes with the meteorological structure that caused the rainfall during a 5-year period. A principal component analysis (PCA) was used to determine the origin of major ions (SO4(2-), NO3-, Cl-, Ca2+, K+, Mg2+, and Na+) in the rainwater. In addition, the meteorological origin of the rain was identified. Previous works suggested a relationship between acid rain and storm convective clouds. However, statistical analyses of pH values show that only the short-lived convective phenomena may cause acid rain in Spain. In fact, rain generated by fronts and that related to long-lived convective systems is neutral or even slightly basic. Results suggest that the acid rain might be related to the meteorological time scale instead of to the cloud type.     

Ecotoxicity of binary mixtures of ILs and inorganic salts of electrochemical interest

Environmental Science and Pollution Research - The applicability of ionic liquids (ILs) has increased over the last years, and even new opportunities are becoming a reality, i.e. mixtures of pure...     

Arsenic release from pyrite ash waste over an active hydrogeological system and its effects on water quality

Environmental Science and Pollution Research - Arsenic is a potentially toxic element of concern for environmental compartments, and it is a frequent pollutant in many abandoned industrial sites....     

Effect of liquefied petroleum gas on ozone formation in Guadalajara and Mexico City

Leakages of liquefied petroleum gas (LPG) are suspected to contribute greatly to ozone (O3) formation in Mexico City. We tested such a hypothesis by outdoor captive-air irradiation (CAI) experiments in the two largest Mexican metropolitan areas: Guadalajara (GMA) in 1997 and Mexico City (MCMA) in 2000. O3 was monitored in each city for 20 days (8:00 a.m.-6:00 p.m.) in smog chambers containing unaltered morning air or morning air enriched with either commercial LPG or LPG synthetic mixture 60/40 (propane and butane). Tested additions of both components were 35% (by volume) in GMA and 60% (by volume) in MCMA. The addition effects on O3 (max) were compared with effects from diluting LPG components or total nonmethane hydrocarbons (tNMHCs) by 50%. Diluting tNMHCs had the greatest absolute effect at both cities: it lowered O3 (max) by 24% in GMA and 55% in MCMA. Adding commercial LPG increased O3 (max) by 6% in GMA and 28% in MCMA; whereas adding LPG synthetic mixture 60/40 caused a similar increase in O3 (max), 4 and 21% in GMA and MCMA, respectively. Compared with dilution of tNMHCs, dilution of LPG-associated compounds had a smaller decreasing effect on O3 (max), only 4% in GMA and 15% in MCMA. These results show that commercial LPG and LPG synthetic mixture 60/40 affect O3 formation to a lesser extent than estimated previously.