Community-based adaptation in low-lying islands in the Philippines: challenges and lessons learned

Community-based adaptation (CBA) seeks to address climate risks and socio-economic drivers of vulnerability simultaneously. However, as CBA activities appear very similar to standard development work, difficulties in identifying good practices arise. To clarify the role of CBA, this study elucidated how climate change can impact pre-existing development problems by investigating the experiences of four low-lying island communities in central Philippines. The islands currently suffer from frequent and extreme tidal flooding (following an earthquake-induced land subsidence in 2013, with a magnitude that is broadly similar to sea-level rise projections under a 1.5 to 2 °C global warming scenario), and endured a dry spell in 2016. The study also identified various publicly and privately initiated adaptation strategies, and evaluated their resilience against actual biophysical events. The study conducted focus group discussions with local leaders and in-depth interviews with government officials and residents in March 2016. Results show that tidal flooding impacted almost all aspects of daily life on the islands, while the dry spell completely depleted their limited water supplies. The strategies implemented by governments and NGOs (e.g., seawalls, rainwater collectors) were found to be inadequate in preventing tidal flooding and compensating for the dry spell. Also, communities used coral stones and plastic waste for raising the floors of their homes, which have an erosive effect on their capacity to adapt in the long term. Lack of community participation in publicly initiated projects and lack of adaptation funding for community-based strategies were the greatest obstacles to implementing climate-resilient solutions.     

Urban ecological security dynamic analysis based on an innovative emergy ecological footprint method

Environment, Development and Sustainability - In China, with the rapid development of economy and the advancement of urbanization, the deterioration of urban ecological environment is obvious. In...     

How do climatic change,cereal crops and livestock production interact with carbon emissions? Updated evidence from China

Environmental Science and Pollution Research - Carbon dioxide emission and climatic variation have a detrimental influence on the atmosphere as well as on agriculture production. The key aim of the...     

关于酒泉某矿井空气预热系统的探讨

我国矿井空气预热最常用方法之一为空气加热器方法,这类系统在实际运行过程中存在一些问题。通过对酒泉某矿井预热方式分析,提出了此方法在空气设备选型及其布置形式和系统自动控制等方面的一些改进意见。     

换个视角谈地震观测改进与研究

自建国以来，中国的地震工作从无到有，地震队伍在不断壮大，经历了一个漫长发展的历程。而2008年5月12日下午2时28分发生在汶川的8．0级特大地震，造成了重大的伤亡和经济损失，引起地震工作者们的认真反思：多年来的地震工作布局有什么不足之处，哪些需要改进？很多问题值得思考，本文仅就以下三方面做一个讨论。     

Seasonal variability of polychlorinated biphenyls (PCBs) and polychlorinated diphenyl ethers (PBDEs) congener profiles in butter in Poland: Dietary risk evaluation

Various statistical methods have been employed to analyse in details seasonal diversification of polychlorinated biphenyl (PCB)/polybrominated diphenyl ether (PBDE) congener profiles found in butter fat. The variability of the PCB/PBDE congener profiles indicates the presence of various sources of the milk fat contamination. The obtained results suggest that the environmental chemical background has the highest share in the contamination sources pattern. Ion trap mass spectrometry coupled to high-resolution gas chromatography with semi-permeable membrane dialysis sample cleanup was used for determination of PCBs and PBDEs in milk fat. Determined butter fat PCB profiles were similar to the profiles characteristic for Aroclor 1254 technical mixture. Our data indicate that dietary intake of PCB/PBDE with milk and milk products may be estimated to be about 717.5 pg kg b.w.^?1 day^?1 for six-indicator PCBs, 0.329 (equivalent toxicity, TEQ) pg kg b.w.^?1 day^?1 for 12 DL PCBs and 50 pg kg b.w.^?1 day^?1 for PBDEs (sum of 14 congeners).     

Removal of arsenic from aqueous solution by two types of nano TiO2 crystals

Titanium dioxide (TiO₂) is a promising sorbent for As removal. There are two main and physico-chemically distinct polymorphs of TiO₂ in nature, namely anatase and rutile. Since the difference of arsenic removal by the two polymorphs of TiO₂ is now well known, study on the arsenic removal efficiency and the underlying mechanism is of great significance in developing new remediation strategies for As-polluted waters. Here batch experiments were carried out in combination with instrumental analysis of X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) to investigate the effects, influential factors and mechanisms of As removal from aqueous solution by two types of nano TiO₂ crystals. The adsorption behavior of anatase and rutile for As(V) and As(III) are well described by Freundlich equations. Anatase had higher As removal efficiency and adsorption capacity than rutile. Solution pH had no influence on the As adsorption of anatase TiO₂, whereas the As removal by rutile TiO₂ was increased by 7?C18% with pH from 4 to 10. Presence of accompanying anions such as phosphate, silicate, nitrate and sulfate, decreased the As(V) and As(III) removal by both crystals, with phosphate being the most effective. However, removal of As by rutile TiO₂ was greatly enhanced in the presence of divalent cations i.e. Ca²⁺ and Mg²⁺. Shading of light decreased the removal of As(V) and As(III) of anatase by 15.5% and 17.5%, respectively, while a slight increase of As removal was observed in the case of Rutile TiO₂. FT-IR characterization of As(V) or As(III)-treated nano TiO₂ crystals indicated that both Ti-O and As-O groups participated in As adsorption. Both FT-IR and XPS analysis demonstrated that As(III) was photooxidated into As(V) when adsorbed by anatase under the light condition. Thus, the effect of crystal types and light condition on As removal should be taken into consideration when nano TiO₂ is applied for As removal from water.     

Morphological characteristics of waste polyethylene/polypropylene plastics during pyrolysis and representative morphological signal characterizing pyrolysis stages

In this work, the morphological characteristics of waste polyethylene (PE)/polypropylene (PP) plastics during their pyrolysis process were investigated, and based on their basic image changing patterns representative morphological signals describing the pyrolysis stages were obtained. PE and PP granules and films were used as typical plastics for testing, and influence of impurities was also investigated. During pyrolysis experiments, photographs of the testing samples were taken sequentially with a high-speed infrared camera, and the quantitative parameters that describe the morphological characteristics of these photographs were explored using the “Image Pro Plus (v6.3)” digital image processing software. The experimental results showed that plastics pyrolysis involved four stages: melting, two stages of decomposition which are characterized with bubble formation caused by volatile evaporating, and ash deposition; and each stage was characterized with its own phase changing behaviors and morphological features. Two stages of decomposition are the key step of pyrolysis since they took up half or more of the reaction time; melting step consumed another half of reaction time in experiments when raw materials were heated up from ambient temperatures; and coke-like deposition appeared as a result of decomposition completion. Two morphological signals defined from digital image processing, namely, pixel area of the interested reaction region and bubble ratio (BR) caused by volatile evaporating were found to change regularly with pyrolysis stages. In particular, for all experimental scenarios with plastics films and granules, the BR curves always exhibited a slowly drop as melting started and then a sharp increase followed by a deep decrease corresponding to the first stage of intense decomposition, afterwards a second increase – drop section corresponding to the second stage of decomposition appeared. As ash deposition happened, the BR dropped to zero or very low values. When impurities were involved, the shape of BR curves showed that intense decomposition started earlier but morphological characteristics remained the same. In addition, compared to parameters such as pressure, the BR reflects reaction stages better and its change with pyrolysis process of PE/PP plastics with or without impurities was more intrinsically process correlated; therefore it can be adopted as a signal for pyrolysis process characterization, as well as offering guide to process improvement and reactor design.     

水污染第三方治理机制中第三方的刑事责任

"环境污染第三方治理"是党和政府顺应时代发展提出的治污新模式,这为我国水污染的治理指明了新方向。水污染第三方治理机制不仅在制度上是个创新,在法律层面也提出了新的要求,特别是在规制第三方的刑事责任方面。要明确第三方成为新的责任主体,在认定责任的归责原则上适用相对严格责任原则,在责任承担的具体方式上适用"双罚制"和罚金刑,为水污染第三方治理机制的引入奠定良好的法律基础。