Forest certification--an instrument to promote sustainable forest management?

Forest certification was introduced in the early 1990s to address concerns of deforestation and forest degradation and to promote the maintenance of biological diversity, especially in the tropics. Initially pushed by environmental groups, it quickly evolved as a potential instrument to promote sustainable forest management (SFM). To date about 124 million ha or 3.2% of the world's forests have been certified by the different certification schemes created over the last decade.Forest certification shares the aim of promoting SFM with another tool, namely criteria and indicators (C&I) for SFM. C&I sets are mainly developed for the national level to describe and monitor status and trends in forests and forest management. They also provide an essential reference basis for forest certification standards, which set performance targets to be applied on a defined area. Progress in developing these two different tools has been significant.After 10 years of implementation, it is evident that the original intention to save tropical biodiversity through certification has largely failed to date. Most of certified areas are in the temperate and boreal zone, with Europe as the most important region. Only around ten per cent is located in tropical countries.The standards used for issuing certificates upon compliance are diverse, both between certification schemes and within one and the same scheme when applied in different regions. However, they are at least equal to legal requirements and often include elements that set actually higher standards.While the quality of actual audits of the standards is of varying quality, there are indications that independent audits are an incentive for improving forest management. As a voluntary market-based tool, forest certification is depending on the ability to cover the costs incurred and thus on often-elusive green consumer sentiment.Regardless of many difficulties, forest certification has been very successful in raising awareness and disseminating knowledge on a holistic SFM concept, embracing economic, environmental and social issues, worldwide. It also provides a tool for a range of other applications than assessment of sustainability, such as e.g. verifying carbon sinks.     

Adjusting irrigation abstraction to minimise the impact on stream flow in the East of Scotland

Abstractions of surface and groundwater for irrigation in Scotland are currently subject to control in only two small catchments. Under the terms of the EU Water Framework Directive, it will be necessary to introduce new legislation to control abstractions elsewhere. To help in the development of appropriate policy for Scotland a study has been carried out to examine the significance of irrigation and the effectiveness of different types of control strategies in terms of the economics of potato cropping and stream hydrology in Scotland. This paper presents the findings of the hydrological study and highlights some of the spatial and temporal issues that need to be considered in the selection of control mechanisms, if they are to be successful in achieving objectives for environmental improvement.The study was focussed on two catchments in the east of Scotland, the Tyne and West Peffer. The effectiveness of several different abstraction control strategies was examined to see how stream flows in the catchment would be modified by their implementation. The results of the study demonstrated that the West Peffer catchment in particular is significantly affected by irrigation abstractions. Control mechanisms based on allowable monthly abstraction volumes and flow-based abstraction bans would be of considerable help in restoring stream flows to their natural levels, but would modify the hydrological regime in slightly different ways. A spatial analysis of stream flows demonstrated that implementation of controls based on a single monitoring point may be ineffective at maintaining acceptable levels of flow throughout the catchment and that this may require a tighter control at the monitoring point.     

Surface runoff losses of copper and zinc in sandy soils

Increased anthropogenic inputs of Cu and Zn in soils have caused considerable concern relative to their effect on water contamination. Copper and Zn contents in surface soil directly influence the movement of Cu and Zn. However, minimal information is available on runoff losses of Cu and Zn in agricultural soils, and soil-extractable Cu and Zn in relation to runoff water quality. Field experiments were conducted in 2001 to study dissolved Cu and Zn losses in runoff in Florida sandy soils under commercial citrus and vegetable production and the relationship between soil-extractable Cu and Zn forms and dissolved Cu and Zn concentrations in runoff water. Five extraction methods were compared for extracting soil available Cu and Zn. Concentrations of dissolved Cu and Zn in runoff were measured and runoff discharge was monitored. Mean dissolved Cu in field runoff water was significantly correlated with the extractable Cu obtained only by 0.01 mol L(-1) CaCl2, Mehlich 1, or DTPA-TEA methods. Dissolved Zn in runoff water was only significantly correlated with extractable Zn by 0.01 mol L(-1) CaCl2. The highest correlations to dissolved Cu in runoff were obtained when soil-available Cu was extracted by 0.01 mol L(-1) CaCl2. The results indicate that 0.01 mol L(-1) CaCl2-extractable Cu and Zn are the best soil indexes for predicting readily released Cu and Zn in the sandy soils. Both runoff discharge and 0.01 mol L(-1) CaCl2-extractable Cu and Zn levels had significant influences on Cu and Zn loads in surface runoff.     

Fed-batch and batch operating mode analysis of a stirred anaerobic sequencing reactor with self-immobilized biomass treating low-strength wastewater

This work presents an analysis of a stirred anaerobic sequencing discontinuous reactor with different substrate feeding strategies resulting in batch, fed-batch/batch and fed-batch operating modes. The reactor, containing granulated biomass, was fed with approximately 2.0L of synthetic domestic wastewater with Chemical Oxygen Demand of nearly 500 mg/L per cycle and operated at 30 degrees C and 50 rpm. Three feeding strategies with a total cycle time of 6 h, including 30-min settling, were adopted: batch mode with a fill cycle of 6 min, a fed-batch/batch mode with fill cycles of 60, 120 and 240 min and fed-batch mode with a fill cycle of 320 min. The system attained average non-filtered and filtered substrate removal efficiency of 78 and 84%, respectively, for all operating conditions, presenting good stability, solid retention and no granule break-up. A first order kinetic model with a residual organic matter concentration was proposed to analyze the influence of the feeding strategy on the performance during a cycle and bicarbonate alkalinity and total volatile acids concentration profiles were also quantified in order to verify the transient stability behavior.     

The multi-disciplinary evaluation of a national agri-environment scheme

With an increasing amount of public funds being spent on agri-environmental schemes effective methods have to be developed to evaluate them. As many schemes have multiple objectives there is a need for a multi-disciplinary approach to any evaluation. A method was developed to assess the degree to which ecological, landscape, historical and access objectives for the Countryside Stewardship Scheme (CSS) in England have been met. The method used a sample of 484 agreements for which data were collected from surveys, a desk study and an interview with the agreement holder. These data were then evaluated by an expert team of an ecologist, landscape architect, landscape historian, and a social scientist specializing in rural affairs. The team were subsequently brought together with a Chair to discuss their findings for each agreement, allocating scores for each of five criteria: agreement negotiation; appropriateness, environmental effectiveness, compliance and side effects. The additionality that each agreement was likely to provide was also assessed. The results of this process suggest that in the majority of cases the CSS agreements should maintain or enhance the environment in terms of ecology, landscape, and landscape history and increase public enjoyment of the countryside. Thirty-six percent of agreements showed high additionality and 38% medium additionality which demonstrates that the CSS is likely to provide a benefit to society. Agreement negotiation, predicted environmental effectiveness and predicted compliance all improved significantly over the period 1996-98. Recommendations made from this project have been implemented by the Government department to improve the CSS. The multi-disciplinary method was successful and, with further development, could be used for assessment of any agri-environment scheme, or potentially any conservation project or broader 'rural development' scheme encompassing environmental, economic and social objectives. A key to success is the need for the criteria to be tailored for the project concerned and clearly established at the beginning.     

Heterogeneous photocatalysed degradation of a herbicide derivative, isoproturon in aqueous suspension of titanium dioxide

Heterogeneous photocatalysed degradation of a herbicide derivative, N-(4-isopropylphenyl)-N',N'-dimethylurea (Isoproturon, 1) was investigated in aqueous suspensions of titanium dioxide by monitoring the change in absorption intensity and depletion in Total Organic Carbon content as a function of irradiation time. The degradation kinetics was studied under different conditions such as pH, catalyst concentration, substrate concentration, different types of TiO(2) and in the presence of electron acceptors such as hydrogen peroxide (H(2)O(2)), potassium bromate (KBrO(3)) and potassium persulphate (K(2)S(2)O(8)) besides molecular oxygen. The degradation rates were found to be strongly influenced by all the above parameters. The photocatalyst Degussa P25 was found to be more efficient as compared with other photocatalysts. An attempt was made to identify the degradation product through GC-MS analysis technique.     

Evaluating factors influencing groundwater vulnerability to nitrate pollution: developing the potential of GIS

The 1991 EU Nitrate Directive was designed to reduce water pollution from agriculturally derived nitrates. England and Wales implemented this Directive by controlling agricultural activities within their most vulnerable areas termed Nitrate Vulnerable Zones. These were designated by identifying drinking water catchments (surface and groundwater), at risk from nitrate pollution. However, this method contravened the Nitrate Directive because it only protected drinking water and not all waters. In this paper, a GIS was used to identify all areas of groundwater vulnerable to nitrate pollution. This was achieved by constructing a model containing data on four characteristics: the quality of the water leaving the root zone of a piece of land; soil information; presence of low permeability superficial (drift) material; and aquifer properties. These were combined in a GIS and the various combinations converted into a measure of vulnerability using expert knowledge. Several model variants were produced using different estimates of the quality of the water leaving the root zone and contrasting methods of weighting the input data. When the final models were assessed all produced similar spatial patterns and, when verified by comparison with trend data derived from monitored nitrate concentrations, all the models were statistically significant predictors of groundwater nitrate concentrations. The best predictive model contained a model of nitrate leaching but no land use information, implying that changes in land use will not affect designations based upon this model. The relationship between nitrate levels and borehole intake depths was investigated since there was concern that the observed contrasts in nitrate levels between vulnerability categories might be reflecting differences in borehole intake depths and not actual vulnerability. However, this was not found to be statistically important. Our preferred model provides the basis for developing a new set of groundwater Nitrate Vulnerable Zones that should help England and Wales to comply with the EU Nitrate Directive.     

Roles of land use resolution and unit-area load rates in assessment of diffuse nutrient emissions

In contrast to its counterparts in Europe and North America, the Australian National Pollutant Inventory (NPI) includes estimates of aggregated emissions of nutrients (total nitrogen and total phosphorus) from catchments and facilities. Sparse or inadequate data limit the extent to which nutrient exports may be estimated from direct observations. The paucity of data for calibration and simulation limits the use of sophisticated models in most Australian catchments. Therefore, a simple unit-area load model-Catchment Management Support System (CMSS)-was selected to estimate aggregated catchment emissions for the NPI. Estimates from models like CMSS are sensitive to spatial and categorical resolution of land uses identified within the catchment and to nutrient generation rates selected for each land use category. Using three Hawkesbury-Nepean subcatchments, we show that while high spatial resolution of land use mapping is useful, only four or five major land use categories with carefully selected generation rates were required to estimate potential nutrient exports sufficiently well and to determine subcatchments contributing most. Nutrient emission estimates proved to be highly dependent on selection of generation rates so a bootstrap technique was adopted to reduce subjectivity and to improve estimates of confidence limits. This led to a specification of new generation rates for Natural, Unimproved pasture, Rural and Urban land uses and to establishment of uncertainty limits.     

Codling moth males do not discriminate between pheromone and a pheromone/antagonist blend during upwind flight

Discrimination between conspecific and heterospecific signals is a key element in the evolution of pheromone-mediated communication in insects. Pheromone antagonists prevent heterospecific attraction. They are typically pheromone synergists in other species and enable specific communication in closely related species, using partly the same chemicals. In codling moth, Cydia pomonella, as in other moths, upwind flights to a pheromone/antagonist blend were slower and more convoluted than to pheromone. However, this deteriorated flight behaviour did not account for the strong decrease in male attraction. The pheromone/antagonist blend blocked instead the onset of upwind flight. This was corroborated by placing a separate source of pheromone close by, which restored male attraction. Males flying upwind did not discriminate between pheromone and the adjacent pheromone/antagonist blend, and landed on either source. This indicates differences in the neural regulation for initiating and maintaining a behavioural response to pheromone.