Polychlorinated biphenyls in marine sediments from the southern North Sea and Scheldt estuary: a ten-year study of concentrations, patterns and trends

The paper reports the concentrations and patterns of CBs in sediments of the Belgian part of the southern North Sea and the Scheldt estuary for the period 1991-2001. The long-term analytical performance was well within the quality assurance boundaries set at the outset of the study and is consistent with the state of the art for this type of analysis. The CB concentrations (given as the median of the sum of IUPAC Nos 28, 52, 101, 118, 138, 153 and 180) vary between 0.1 microg kg(-1) and 50 microg kg(-1) dry weight in the total sediment and it could be demonstrated that CB patterns in the fine fraction of the sediment were closely similar throughout the investigated area. Isolation of the fine fraction (<63 microm) by sieving can be regarded as a physical normalisation to reduce the differences in sediment granulometric composition. It allows for a better understanding of CB distribution and patterns and improves the trend analysis. A significant downward trend could not be found at any of the stations, which suggests that CB levels have not been changing in the area of interest in the past decade.     

Phytoremediation of aquaculture wastewater for water recycling and production of fish feed

Five plants were examined for their ability to remove nutrients from aquaculture wastewater and suitability as fish feed: alfalfa, white clover, oat, fall rye, barley. The seeds were first germinated in water in a hydroponic system, and the plants were fed wastewater from Tilapia production facility. Clover and alfalfa seeds were infected with fungus shortly after germination, and their roots were completely destroyed by day 14. Oat, rye and barley had the fastest growth and showed greater tolerance to fungal disease compared with alfalfa and clover. Although substantial amounts of soluble and insoluble substances were released by the seeds during the germination period, the plants were able to remove all the pollutants in wastewater and significant portions of those released substances. The total reductions in total solids, COD, NO3-N, NO2-N, phosphate and potassium ranged from 54.7% to 91.0%, 56.0% to 91.5%, 82.9% to 98.1%, 95.9% to 99.5%, 54.5% to 93.6% and 99.6% to 99.8%, respectively. Oat, barley and rye grow well in this type of hydroponic system and can be used as a fish feed after being supplemented with fat, Ca, Na, Mn and Fe. Oil seeds and the chlorides of these elements could be added to these plants when formulating the fish feed. For a continuous operation, a two-unit system could be configured to allow for one week germination and one week cleaning and startup in one unit while the other unit is in operation.     

Reconstruction of historical trends of PCDD/Fs and PCBs in the Venice Lagoon, Italy

Historical trends of PCDD/Fs and PCBs from the year 1900 have been reconstructed for the Venice Lagoon area by using a fugacity-based dynamic multimedia model. A novel approach to estimate the inputs to the system was applied. Emissions to the lagoon were estimated by studying dated sediment cores taken from salt marshes located in the lagoon area. These cores have recently proven to be a suitable tool to reconstruct the temporal trends of atmospheric deposition of POPs. According to the model, concentrations of PCBs and PCDD/Fs in air and water reflect the trends of their production and usage, peaking during the 1960s. The peaks in the sediment were delayed by 5-40 years depending on the congener. Predicted concentrations are in good agreement with experimental results. The most important input parameters, identified by a sensitivity analysis, are the degradation constants, K(ow), the Henry's law constant, vapour pressure, active sediment depth, sediment resuspension, and deposition rates, and water residence time in the lagoon.     

Radioactivity of the soil in Vojvodina (northern province of Serbia and Montenegro)

The widespread public belief that during the bombardment of Vojvodina (Yugoslavia) this region was contaminated by depleted uranium has recently raised public concern with respect to the potential contamination of agricultural products due to soil radioactivity. Based on the gamma-spectrometric analysis of 50 soil samples taken from the region of Vojvodina we concluded that there is no increase of radioactivity that could endanger the food production. Taking into account the transfer factors of 137Cs to plants, the measured activity concentrations of this isotope should not endanger the health safety of the produced food. No traces of depleted uranium have been found. The natural radioactivity levels are compared with the results form other countries.     

Toxicity of tire debris leachates

Data on the indicators of environmental impact of tire debris, originated from the tire abrasion on roads, are extremely scarce, while it is well known that tires may produce deleterious effects. Tire debris contains significant quantities of zinc (Zn) which may be released by tire rubber. We have used tire particles (TD) produced in laboratory from new rubber. Two sets of experiments were set up to obtain eluates. One set used 50 and 100 g/L TD to produce eluates at pH 3-7. The Zn quantity was measured with a Inductively Coupled Plasma-Atomic Emission Spectrometry. The eluates at 1%,10%,50%,100% concentrations in culture media were tested on Raphidocelis subcapitata, Daphnia magna and Xenopus laevis embryos (FETAX test). The other set of experiments was performed putting 250 mg/L TD in a column with glass beads to control particle dispersion during the elution process. We demonstrate that factors such as pH, size and particles aggregation deeply influence the elution process, that the amount of Zn leached from particles is related to their aggregation rather than their quantity. These results, even though do not reflect the real environmental toxicity of the leachates, can be successfully used for comparative purposes allowing an initial assessment of the potential effect of tire derived particles.     

Levels of 137Cs in muddy sediments of the seabed of the Bay of Cadiz, Spain. Part I. Vertical and spatial distribution of activities

This is the first of a two-part paper. This first part describes a detailed study conducted of the spatial and vertical distribution of the concentration of the radionuclide (137)Cs, utilising columns of sediment extracted from the seabed of the Bay of Cadiz (Spain) as specimens. The activity concentrations have been measured by means of gamma spectrometry using a HPGe detector and (137)Cs is used as an indicator of the sedimentation and contamination processes in the zone. At the same time the relationship between the levels of activity found and other hydrodynamic and sedimentological variables characteristic of the zone have been studied. The experimental results obtained will also serve to develop a model of the distribution of (137)Cs, which will be presented in the second part of this paper.     

Pollution historical trends as recorded by sediments at selected sites of the Venice Lagoon

Polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and hexaclorobenzene (HCB) were determined in three sediment cores of the Venice Lagoon: I1, from the San Giuliano Canal that is likely the main source of pollutants for the study area; E, representing the lagoon sediment of the zone of Campalto; and M3, typical of a salt marsh environment and mostly subject to atmospheric inputs. Maximum concentrations were found in core I1: 25-1858 ngI-TE kg(-1) (PCDD/Fs), 1.7-13 microg kg(-1) (HCB), and 107-717 microg kg(-1) (PCBs) are surficial and peak values, respectively. The lagoon sediment (E), is much less contaminated: 24-47 ngI-TE kg(-1) for PCDD/Fs, 2.3-3.6 microg kg(-1) for HCB, and 56-203 microg kg(-1) for PCBs, whereas M3 shows the lowest values: 1.6-6.0 ngI-TE kg(-1) for PCDD/Fs, 0.3-0.6 microg kg(-1) for HCB, and 7.1-39 microg kg(-1) for PCBs. In any case, the recent trend is toward a decrease of pollutant concentration. The chronology of cores E and M3 is based on both 210Pb and 137Cs activity-depth profiles. The maximum concentrations of PCDD/Fs, HCB, and PCBs correspond to the years 1949, 1980, and 1968, respectively. The homologue profiles of PCDD/Fs confirm that I1 has been subject to an industrial source while the other sites also recorded significant contributions, changing over time, of octachlorinated dioxin from combustion. A comparison of the pollutant inventories, all normalised to 210Pb inventories, suggests that the atmospheric contribution to the contamination of the area of Campalto is low: the upper limits range from 6% (PCDD/Fs) to 17% (HCB).     

Fibre crops as alternative land use for radioactively contaminated arable land

The transfer of radiocaesium, one of the most important and widespread contaminants following a nuclear accident, to the fibre crops hemp (Cannabis sativa L.) and flax (Linum usitatissimum L.) as well as the distribution of radiocaesium during crop conversion were studied for sandy soil under greenhouse and lysimeters conditions. Soil parameters did not unequivoqually explain the transfer factors (TF) observed. TFs to flax stems ranged from 1.34 to 2.80x10(-3) m2 kg(-1). TFs to seeds are about a factor of 4 lower. During the retting process for separating the fibres from the straw, more than 95% of the activity was removed with the retting water. For hemp, the TF to the stem was about 0.6x10(-3) m2 kg(-1). For hemp, straw and fibres were mechanically separated and TF to straw was about 0.5x10(-3) m2 kg(-1) and to fibres 1.0x10(-3) m2 kg(-1). Generally, the TFs to the useable plant parts both for hemp and flax, are low enough to allow for the production of clean end-products (fibre, seed oil, biofuel) even on heavily contaminated land. Given the considerable decontamination during retting, contamination levels in flax fibres would only exceed the exemption limits for fibre use after production in extreme contamination scenarios (>12,300kBq m(-2)). Since hemp fibres are mechanically separated, use of hemp fibres is more restricted (contamination <740kBq m(-2)). Use of stems as biofuel is restricted to areas with contamination levels of <250 and 1050kBq m(-2) for flax and hemp, respectively. Use of seeds for edible oil production and flour is possible almost without restriction for flax but due to the high TFs to seed observed for hemp (up to 3x10(-3) m2 kg(-1)) consumption of hemp seed products should be considered with care.     

241Am, 137Cs, Sr and Pb uptake by tobacco as influenced by application of Fe chelators to soil

To determine the potential for phytoextraction of 241Am and other contaminants from soil, accumulation of 241Am, 137Cs, Sr, Fe, Al, Pb, and Mg by tobacco was determined for soil applications of two concentrations of ethylenediaminetetraacetic acid (EDTA), citric acid, and ascorbic acid. In tobacco receiving EDTA at 3.1 mmol/kg of soil, 241Am content of plants averaged 15 Bq/kg (ranging up to 26 Bq/kg) while Fe concentrations became constant at 4.5 mmol/kg. Soil treatment with 18.8 mmol/kg EDTA resulted in average 241Am concentrations of 29 Bq/kg (19 times higher than controls). Uptake of Pb was similar to 241Am. In these samples, Fe increased to a maximum of almost 18 mmol/kg and 241Am content increased linearly with both Fe and Al. Plants receiving ascorbic and citric acids took up smaller quantities of 241Am, Pb, and Fe, even though these reagents were able to elute about as much Fe from the soil as EDTA. Synchrotron microbeam X-ray fluorescence (SXRF) was used to determine radial distributions of elements in roots and stems with and without EDTA treatment. SXRF maps indicate differences in behavior between Fe and Pb that are consistent with the bulk plant observations and provide insight into changes in metal content of the roots in the presence of EDTA.     

Colonization of surfaces by phenolic compounds utilizing microorganisms

The aim of the present study is to determine optimal adhesive interaction of phenolic compounds utilizing Candida maltosa and Rhodococcus erythropolis when adhering to kaolin, silicone, synthetic foil (Steriking R40) and fluorinated silicones, comparing cell and support surface hydrophobicity. In parallel, the interfering effect of detergents was investigated. Data obtained show that the less hydrophobic supports display high initial cell adhesion when contacted with the cell type with a lower surface hydrophobicity (yeast cell) but most stable yeast biofilms are those formed on highly hydrophobic fluorinated silicones. On the other hand, support hydrophobicity has no effect on bacterial cell detachment; however, bacterial biofilms are denser when growing on more hydrophobic supports. Both detergents interfere (independently on the cell type) with the early and late phases of biofilm development.