Regional carbon cycle responses to 25 years of variation in climate and disturbance in the US Pacific Northwest

Variation in climate, disturbance regime, and forest management strongly influence terrestrial carbon sources and sinks. Spatially distributed, process-based, carbon cycle simulation models provide a means to integrate information on these various influences to estimate carbon pools and flux over large domains. Here we apply the Biome-BGC model over the four-state Northwest US region for the interval from 1986 to 2010. Landsat data were used to characterize disturbances, and forest inventory data were used to parameterize the model. The overall disturbance rate on forest land across the region was 0.8 % year^?1, with 49 % as harvests, 28 % as fire, and 23 % as pest/pathogen. Net ecosystem production (NEP) for the 2006–2010 interval on forestland was predominantly positive (a carbon sink) throughout the region, with maximum values in the Coast Range, intermediate values in the Cascade Mountains, and relatively low values in the Inland Rocky Mountain ecoregions. Localized negative NEPs were mostly associated with recent disturbances. There was large interannual variation in regional NEP, with notably low values across the region in 2003, which was also the warmest year in the interval. The recent (2006–2010) net ecosystem carbon balance (NECB) was positive for the region (14.4 TgC year^?1). Despite a lower area-weighted mean NECB, public forestland contributed a larger proportion to the total NECB because of its larger area. Aggregated forest inventory data and inversion modeling are beginning to provide opportunities for evaluating model-simulated regional carbon stocks and fluxes.     

Geochemical investigations of metals release from submerged coal fly ash using extended elutriate tests

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focused on targeted removal of material from the channel through hydraulic dredging, as well as mechanical excavation in some areas. The agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could alter the redox state of metals present in the fly ash and thereby change their sorption and mobility properties. A series of extended elutriate tests were used to determine the concentration and speciation of metals released from fly ash. Results indicated that arsenic and selenium species released from the fly ash materials during elutriate preparation were redox stable over the course of 10d, with dissolved arsenic being present as arsenate, and dissolved selenium being present as selenite. Concentrations of certain metals, such as arsenic, selenium, vanadium, and barium, increased in the elutriate waters over the 10d study, whereas manganese concentrations decreased, likely due to oxidation and precipitation reactions.     

Modelling the biological performance of a side-stream membrane bioreactor using ASM1

Membrane bioreactors(MBRs) are attracting global interest but the mathematical modeling of the biological performance of MBRs remains very limited. This study focuses on the modelling of a side-stream MBR system using Activated Sludge Model No. 1 (ASM1), and comparing the results with the modelling of traditional activated sludge processes. ASM1 parameters relevant for the long-term biological behaviour in MBR systems were calibrated(i, e. YH = 0.72gCOD/gCOD, YA = 0.25gCOD/gN, bH = 0.25 d^-1, bA = 0.080 d^-1 and fp =0.06), and generally agreed with the parameters in traditional activated sludge processes, with the exception that a higher autotrophic biomass decay rate was observed in the MBR. A sensitivity analysis for steady state operation and DO dynamics suggested that the biological performance of the MBR system (the sludge concentration, effluent quality and the DO dynamics) are very sensitive to the parameters(i.e. YH, YA, bH, hA, μmaxH and μmaxA), and influent wastewater components( X1, Ss, Xs, SNH).     

Immobilization of polyphenol oxidase onto mesoporous activated carbons -- isotherm and kinetic studies

Investigations were carried out in batch modes for studying the immobilization behavior of polyphenol oxidase (PPO) on two different mesoporous activated carbon matrices, MAC400 and MAC200. The PPO was immobilized onto MAC400 and MAC200 at various enzyme activities 5 x 10(4), 10 x 10(4), 20 x 10(4), 30 x 10(4)Ul(-1), at pH 5-8, and at temperature ranging from 10 to 40 degrees C. The intensity of immobilization of PPO increased with increase in temperature and initial activities, while it decreased with increase in pH. Immobilization onto MAC400 followed the Langmuir model while Langmuir and Freundlich models could fit MAC200 data. Non-linear pseudo first order, pseudo second order and intraparticle diffusion models were evaluated to understand the mechanism of immobilization. The free and immobilized enzyme kinetic parameters (K(m) and V(max)) were determined by Michaelis-Menten enzyme kinetics. The K(m) values for free enzyme, PPO immobilized in MAC400 and in MAC200 were 0.49, 0.41 and 0.65 mM, respectively. The immobilization of PPO in carbon matrices was confirmed using FT-IR spectroscopy and scanning electron microscopy.     

The role of fecundity regulation and abortive maturation in the reproductive strategy of Norwegian spring-spawning herring (<Emphasis Type="Italic">Clupea harengus</Emphasis>)

This study investigates the reproductive strategy, an important component in the estimation of stock reproductive potential, in Norwegian spring-spawning (NSS) herring (Clupea harengus), an iteroparous, extreme capital spawner, through the estimation of fecundity over a period of 3 years including two complete maturation cycles and three spawning seasons. NSS herring have an ‘optimistic’ strategy, with almost all adult herring caught in August being in the vitellogenic stage of ovary development, despite overwintering energy levels not being determined at this time. Fecundity in the summer, i.e., more than half a year before spawning in spring (February–April), was also much higher than could be supported by an individual’s concurrent energy levels. Consequently, fecundity was later reduced through atresia with the majority of this occurring before overwintering. The total reduction and the length of the time period in which the reduction took place appeared to vary between years. During the spawning season, atresia was mostly prevalent in small first-time spawners <180 g and several individuals aborted ovary development at this time. Final fecundity varied between years with a difference of up to 18% and was linked to annual variations in condition. In conclusion, this extensive field study has demonstrated that each individual herring can display a suite of size-specific reproductive tactics to fine-tune oocyte production in response to fluctuating levels of planktonic prey.     

Comparing Contaminant Removal Costs for Aquifer Recharge with Wastewater with Water Supply Benefits

The use of waters of impaired quality has been suggested as a means to expand available water resources supply for water‐limited communities. An ongoing concern is the safety of supplies that use wastewater because of the potential for introduction of emerging contaminants such as pharmaceuticals into drinking water supplies. Prior research into contaminants of emerging concerns (CECs) have included a variety of methods, but the only consistent removal is with reverse osmosis (RO) membranes, ultraviolet light (UV), and advanced oxidation processes (AOP). However, few of these prior studies have measurable quantities of these contaminants in the influent wastewater, so determining actual removal percentages is difficult. This project was designed to evaluate the removal of CECs to verify that a 3‐log removal of common constituents was realized. Spike testing was used to compare to prior research and to evaluate whether the project costs were competitive with other forms of reuse or other water supplies. The combination of RO/UV/AOP was effective at obtaining a 3‐log removal of CECs, but the RO and UV/AOP processes alone were not capable of removing all substances. However, despite the extensive treatment, the proposed process was both competitive cost‐wise and met the water quality goals.     

Effect of elemental sulphur on the vegetation of a Lodgepole pine stand

Shrub and herb cover decreased 98% and diversity 76% after particulate elemental sulphur was deposited in a Pinus contorta Loudon var. latifolia Engelm. forest in west-central Alberta, Canada. Decreases were measured over four years and, initially, were greater for the herbs than they were for the shrubs. The decline in the herbs occurred one year before decreases in half the shrub species. The dramatic decline of the vegetation appeared related to the changes in the soil chemistry of the surface organic horizon following the oxidation of elemental sulphur.     

Biological Indicators of Marine Environmental Health: Meiofauna – A Neglected Benthic Component?

This paper considers the use of meiofauna (benthic metazoa 45 to 500 m in size) as biological indicators for monitoring marine environmental health. To date, this abundant and ubiquitous group of invertebrates has been largely neglected in applied sampling programmes; instead, emphasis has been placed upon more conspicuous biological components such as seagrass, macrofauna and epiphytes. In an attempt to redress this balance, this paper sets out three objectives: (1) to explain the reasons for selecting biological response indicators from across the whole spectrum of phylogenetic organisation, (2) to summarise those aspects of meiofaunal life-history and demography that render this group suitable for monitoring anthropogenic pollution and disturbance, (3) to suggest how to optimise the inclusion of meiofauna in monitoring programmes so that they provide maximum information for management purposes. To achieve these objectives the environmental impact assessment framework of Ward and Jacoby (1992) is adopted as a matrix into which the relevant components of meiofaunal ecology are fitted. Using this matrix, meiofauna are shown to have advantages that include their sessile habit, high species diversity, short generation time, direct benthic development and ubiquitous distribution. Disadvantages include their small size, high level of spatial and temporal variability, the potential cost of sample processing and the limited taxonomic literature accessible to non-specialist workers. The paper concludes with a discussion of sampling strategies and methods of analysis that may be used to efficiently incorporate meiofauna as biological response indices into environmental monitoring. Emphasis is placed on cost-effective techniques such as taxonomic minimalism.