0.1～3000MHz射频电磁环境时间变化规律及其与人群作息时间关系的研究

利用自动连续监测仪器对在成都市城区选定的监测点位开展了持续数日的测量,获取了测点的长时间监测数据,通过对监测数据的分析,研究了0.1~3000MHz射频电磁环境随时间变化的规律及其与人群作息时间的关系,并对电磁环境人工手动监测的适宜时间段进行了分析。     

Spatial correlation and influencing factors of industrial agglomeration and pollution discharges: a case study of 284 cities in China

Environmental Science and Pollution Research - Exploring the spatial correlation characteristics and influencing factors of industrial agglomeration and pollution discharge, which is of great...     

Optimization of bio-drying of kitchen waste: inoculation,initial moisture content and bulking agents

Journal of Material Cycles and Waste Management - Bio-drying has been proved to be a promising method for treatment of MSW (municipal solid waste) and sewage sludge due to its high energy...     

夏、冬季降雨中溶解性有机质(DOM)光谱特征及来源辨析

利用紫外-可见光谱与三维荧光光谱,结合拉格朗日混合单粒子轨道模型及火点图,研究了重庆2013年夏、冬两季雨水DOM光谱特征,并对其来源进行解析.结果表明,雨水DOM与水体、土壤DOM具有类似性质光谱特征,证明降雨DOM也是陆地及水环境中DOM地化特征的重要贡献者.雨水DOM中DOC含量为0.88~12.80 mg·L-1,CDOM含量在3.17~21.11m-1之间,夏、冬两季降雨DOM差异明显(P0.05).与夏季相比,冬季降雨DOM分子量较小,芳香性程度较低,腐殖化程度也更低,输入主要以本地和短距离输送为主;而夏季DOM来源较分散.尽管吸收和荧光光谱可用于解析雨水DOM组成和来源,但在光谱特征的解析和来源识别上与其他来源DOM有所区别,传统"内、外源区分"并不适用于雨水DOM.     

南京北郊春季气溶胶吸湿性分析

大气气溶胶的吸湿性对气溶胶粒子的谱分布、云凝结核形成、气候强迫、人体健康等均有重要的影响.利用吸湿性串联差分迁移率分析仪(HTDMA)在2014年4月16日~5月21日对南京北郊的大气气溶胶吸湿特性进行观测.30~230 nm气溶胶粒子在90%相对湿度下的吸湿增长观测结果表明,气溶胶粒子的吸湿增长因子平均概率分布函数(GF-PDF)呈现明显的双峰分布,即一个占主导地位的强吸湿模态,和一个相对较小但仍很明显的弱吸湿模态.对吸湿性的日夜对比分析发现,整体上白天的气溶胶粒子吸湿性大于夜间气溶胶粒子,白天强吸湿模态的粒子数目比例高于夜间,夜间气溶胶粒子的外混合程度更高.利用HYSPLIT模式对气溶胶来源分析结果表明,观测期间南京北郊主要受到3类气团的影响.其中西北大陆气团背景下爱根核模态粒子在经过大陆的长距离输送过程后,老化程度较高,吸湿性也更强.而对于积聚模态粒子,则为来自东方气团的粒子吸湿性更强,强吸湿模态粒子数目比例也较高.局地气团背景下气溶胶粒子在各粒径段都具有较高的强吸湿比例.     

Geochemistry of heavy metal-contaminated sediments from the Four River inlets of Dongting lake,China

Environmental Science and Pollution Research - The concentrations of major and trace elements in the sediments from the Four River inlets of Dongting Lake were analysed. The results show that the...     

Synthesis of efficient Y-Bi2WO6/G visible light photocatalysts with high stability for pollutant degradation

Environmental Science and Pollution Research - For effective photocatalytic pollutant degradation on bismuth tungstate (Bi2WO6), it is vital to enhance the photogenerated charge separation and the...     

Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 μg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 μg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

     

Desorption of CO2, SO2, and NH3 in the vacuum evaporation of desulfurization wastewater

Environmental Science and Pollution Research - Mechanical vapor compression and multi-effect evaporation have been widely used in achieving zero discharge of desulfurization wastewater as they are...