Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

Cesium isotope ratios as indicators of nuclear power plant operations

There are multiple paths by which radioactive cesium can reach the effluent from reactor operations. The radioactive ¹³⁵Cs/¹³⁷Cs ratios are controlled by these paths. In an effort to better understand the origin of this radiation, these ¹³⁵Cs/¹³⁷Cs ratios in effluents from three power reactor sites have been measured in offsite samples. These ratios are different from global fallout by up to six fold and as such cannot have a significant component from this source. A cesium ratio for a sample collected outside of the plant boundary provides integration over the operating life of the reactor. A sample collected inside the plant at any given time can be much different from this lifetime ratio. The measured cesium ratios vary significantly for the three reactors and indicate that the multiple paths have widely varying levels of contributions. There are too many ways these isotopes can fractionate to be useful for quantitative evaluations of operating parameters in an offsite sample, although it may be possible to obtain limited qualitative information for an onsite sample.     

Aerial measurement of radioxenon concentration off the west coast of Vancouver Island following the Fukushima reactor accident

In response to the Fukushima nuclear reactor accident, on March 20th, 2011, Natural Resources Canada conducted aerial radiation surveys over water just off the west coast of Vancouver Island. Dose-rate levels were found to be consistent with background radiation, however a clear signal due to ¹³³Xe was observed. Methods to extract ¹³³Xe count rates from the measured spectra, and to determine the corresponding ¹³³Xe activity concentration, were developed. The measurements indicate that ¹³³Xe concentrations on average lie in the range of 30-70 Bq/m³.     

Noninvasive molecular genetic analysis in studying the ecology of the snow leopard: Problems and prospects

Molecular genetic methods were used to perform the species and individual identification of 117 samples of hair and feces of carnivores collected in natural habitats. The species were identified for 85.5% of the samples. The analysis of the nucleotide sequences of the cytochrome b mitochondrial gene was used to identify the samples of hair and feces of snow leopards (Uncia uncia, 40%), red foxes (Vulpes vulpes, 48%), wolves (Canis lupus, 6%), and lynx (Lynx lynx, 5%). The analysis of eight microsatellite loci allowed the genotypes of 13 snow leopards to be described. The sex of 11 animals was identified.     

Adaptive capacity determinants in developed states: examples from the Nordic countries and Russia

Adaptive capacity in a community context has so far mainly been studied in developing countries as well as indigenous communities in the industrialised world. This article adds to that literature through reviewing studies undertaken in the Nordic countries and Russia, highlighting the ways in which general determinants of adaptive capacity play out in Northern, industrialised contexts. The paper illustrates that the determinants of adaptive capacity in industrialised states exhibit systematic differences from mixed subsistence-cash based communities such as those found in Arctic Canada. We discuss in particular the importance of economic resources in a market-based system, technological competition, and infrastructure, in determining adaptive capacity of natural resource-dependent communities in the Nordic countries and Russia. The paper also illustrates differences in adaptive capacity within the case study region, including between peripheral and central locations with regard to economic resources and diversification possibilities, and between Nordic and Russian cases with regard to infrastructure and technology access. The findings indicate that understanding of determinants of adaptive capacity in resource-dependent communities would benefit from both further contextualisation and broad comparison, across different types of political and administrative systems.     

Awareness and convenience are important in increasing conference sustainability

Conference organizers are increasingly making efforts to reduce resource use at conferences, yet few responsibilities are placed on attendees. We hosted an ecology conference and offered attendees a discount if they took a sustainability pledge agreeing to reduce their resource use at the conference. In a post-conference survey, 83% of respondents reported fulfilling the pledge, but 62% indicated that convenience was the biggest obstacle impeding their ability to continue the pledge during and after the conference. We found great willingness by attendees to reduce resource use at and beyond our conference, and facilitating their participation was an important part of our success.     

Integrated biological responses of zebrafish (Danio rerio) to analyze water quality in regions under anthropogenic influence

This study analyzed water quality in regions around Patos lagoon (Southern Brazil) that are under anthropogenic pressure. Water samples were collected from five different sites, including one used as a source for human consumption (COR) and others known to be influenced by human activities (IP). Danio rerio (Teleostei, Cyprinidae) organisms were exposed for 24 h to these water samples, plus a control group. It was observed that: (1) reactive oxygen species levels were lower in COR and IP than in the control group; (2) glutamate-cysteine ligase (catalytic subunit) expression was higher in COR than in other sites; (3) exposure to all water samples affected long-term memory (LTM) when compared to control group. Thus, some water samples possess the ability to modulate the antioxidant system and to induce a decline in cognitive functions, as measured by LTM. The obtained results indicate that a combination of variables of different organization level (molecular, biochemical and behavioral) can be employed to analyze water quality in impacted regions.     

Carry-over of dietary organochlorine pesticides, PCDD/Fs, PCBs, and brominated flame retardants to Atlantic salmon (Salmo salar L.) fillets

Information on carry-over of contaminants from feed to animal food products is essential for appropriate human risk assessment of feed contaminants. The carry-over of potentially hazardous persistent organic pollutants (POPs) from feed to fillet was assessed in consumption sized Atlantic salmon (Salmo salar). Relative carry-over (defined as the fraction of a certain dietary POP retained in the fillet) was assessed in a controlled feeding trial, which provided fillet retention of dietary organochlorine pesticides (OCPs), dioxins (PCDD/Fs), polychlorinated biphenyls (PCBs), and brominated flame retardants (BFRs). Highest retention was found for OCPs, BFRs and PCBs (31-58%), and the lowest retentions were observed for PCDD/Fs congeners (10-34%). National monitoring data on commercial fish feed and farmed Atlantic salmon on the Norwegian market were used to provide commercially relevant feed-to-fillet transfer factors (calculated as fillet POP level divided by feed POP level), which ranged from 0.4 to 0.5, which is a factor 5-10 times higher than reported for terrestrial meat products. For the OCP with one of the highest relative carry-over, toxaphene, uptake and elimination kinetics were established. Model simulations that are based on the uptake and elimination kinetics gave predicted levels that were in agreement with the measured values. Application of the model to the current EU upper limit for toxaphene in feed (50 μg kg⁻¹) gave maximum fillet levels of 22 μg kg⁻¹, which exceeds the estimated permissible level (21 μg kg⁻¹) for toxaphene in fish food samples in Norway.     

Nitrogen deposition effects on Mediterranean-type ecosystems: an ecological assessment

We review the ecological consequences of N deposition on the five Mediterranean regions of the world. Seasonality of precipitation and fires regulate the N cycle in these water-limited ecosystems, where dry N deposition dominates. Nitrogen accumulation in soils and on plant surfaces results in peaks of availability with the first winter rains. Decoupling between N flushes and plant demand promotes losses via leaching and gas emissions. Differences in P availability may control the response to N inputs and susceptibility to exotic plant invasion. Invasive grasses accumulate as fuel during the dry season, altering fire regimes. California and the Mediterranean Basin are the most threatened by N deposition; however, there is limited evidence for N deposition impacts outside of California. Consequently, more research is needed to determine critical loads for each region and vegetation type based on the most sensitive elements, such as changes in lichen species composition and N cycling.