Australian firefighters' exposure to air toxics during bushfire burns of autumn 2005 and 2006

Bushfire fighting is a hazardous occupation and control strategies are generally in place to minimize the hazards. However, little is known regarding firefighters' exposure to bushfire smoke, which is a complex mixture of toxic gases and particles. In Australia, during the prescribed burning season, firefighters are likely to be exposed on a regular basis to bushfire smoke, but whether these exposures affect health has yet to be determined. There are a number of factors that govern whether exposure to smoke will result in short-term and/or long-term health problems, including the concentrations of air pollutants within the breathing zone of the firefighter, the exposure duration, and health susceptibility of the individual, especially for pre-existing lung or heart disease. This paper presents measurements of firefighters' personal exposure to bushfire smoke, the first step within a risk management framework. It provides crucial information on the magnitude, extent and frequency of personal exposure to bushfire smoke for a range of typical scenarios. It is found that the primary air toxics of concern are carbon monoxide (CO), respirable particles and formaldehyde. Also, work activity is a major factor influencing exposure with exposure standards (both average and short-term limits) likely to be exceeded for activities such as suppression of spot fires, holding the fireline, and patrolling at the edge of a burn area in the urban-rural interface.     

Processing of antifouling paint particles by Mytilus edulis

Particles of spent antifouling paint collected from a marine boatyard were ground and subsequently administered to the filter-feeding bivalve, Mytilus edulis, maintained in static aquaria. Concentrations of Cu and Zn were measured in seawater throughout a 16 h feeding phase and a 24 h depuration phase, in rejected and egested particles collected during the respective phases, and in the organisms themselves at the end of the experiments. Concentrations and distributions of Cu and Zn in processed particles indicated that M. edulis was able to ingest paint particles, regardless of whether nutritionally viable silt was present, and no mechanism of particle discrimination was evident. Enrichment of Cu and Zn in the visceral mass of individuals and in the aqueous phase during depuration supported these assertions, although elevated concentrations in other compartments of the organism (e.g. shell, gill) suggested that biotic and abiotic uptake of aqueous metal was also important.     

Delving into the “Institutional Black Box”: Revealing the Attributes of Sustainable Urban Water Management Regimes1

van de Meene, Susan J. and Rebekah R. Brown, 2009. Delving into the “Institutional Black Box”: Revealing the Attributes of Sustainable Urban Water Management Regimes. Journal of the American Water Resources Association (JAWRA) 45(6):1448‐1464. Abstract: This paper is based on the proposition that the transition to sustainable urban water management has been hampered by the lack of insight into attributes of a sustainable urban water regime. Significant progress has been made in developing technical solutions to advance urban water practice, however it is the co‐evolution of the socio‐institutional and technical systems that enable a system‐wide transition. A systematic analysis of 81 empirical studies across a range of practice areas was undertaken to construct a schema of the sustainable urban water regime attributes. Attributes were identified and analyzed using a framework of nested management regime spheres: the administrative and regulatory system, inter‐organizational, intra‐organizational, and human resources spheres. The regime is likely to involve significant stakeholder involvement, collaborative inter‐organizational relationships, flexible and adaptive organizational cultures, and motivated and engaging employees. Comparison of the constructed sustainable and traditional regime attributes reveals that to realize sustainable urban water management in practice a substantial shift in governance is required. This difference emphasizes the critical need for explicitly supported strategies targeted at developing each management regime sphere to further enable change toward sustainable urban water management.     

Spore release by the green alga Ulva: a quantitative assay to evaluate aquatic toxicants

A toxicity test using spore release of the aquatic green alga, Ulva, was developed and evaluated by assessing the toxicity of different organic and inorganic chemicals and elutriates of sewage or waste sludge. The toxic ranking of four metals was: Cu (EC50 of 0.040mgL(-1))>Cd (0.095mgL(-1))>Pb (0.489mgL(-1))>Zn (0.572mgL(-1)). The EC50 for TBTO ranged from 24 to 63microgL(-1). The most toxic VOC was formalin (EC50 of 0.788microlL(-1)) and the least toxic was acetone. Spore release was significantly inhibited in all elutriates; the greatest and least toxic effects were for industrial sewage (3.29%) and filtration bed (10.08%), respectively. The bioassay is simple, inexpensive and sensitive. The cosmopolitan distribution of Ulva means that the test would have a potential application worldwide.     

Trace contamination with dioxin-like chemicals: evaluation of bioassay-based TEQ determination for hazard assessment and regulatory responses

Many recent dioxin contamination events have been traced back to poisoned animal feed or feed ingredients. Therefore, enforcement authorities placed limits on the levels of dioxins in food and feed or implemented strict monitoring and control programs. The levels in force are generally expressed as TEQ values, which inherently accepts the underlying hypothesis that the effects of dioxin-like chemicals are additive. TEQ determination involves either chemo-analysis, with high-resolution gas chromatography in combination with high-resolution mass spectroscopy, or bio-analysis. Bio-analytical methods, more particularly the reporter gene expression method CALUX, are advantageous due to their high throughput rate and low cost. Moreover, the CALUX methodology detects the overall dioxin-like toxicity, rather than the limited number of compounds investigated by chemo-analysis. Bioanalytical methods such as CALUX also differ from chemo-analysis in that the contribution of antagonistic as well as synergistic effects, which violate the additivity principle, can be detected. The application of bio-analytical methods can facilitate a broader assessment of public health risks by intensifying the current monitoring programs in terms of both sample numbers and types. Bio-analysis provides information on the total dioxin-like activity of the samples under study (hazard assessment); however, chemo-analysis is still needed to identify the predominant contaminants (congener identification) for risk management.     

Line transect sampling of Karner blue butterflies ( Lycaeides melissa samuelis)

Line transect sampling is an effective survey method for estimating butterfly densities because it provides unbiased estimates of site-density (provided key assumptions are met), and estimates are comparable among sites. For monitoring Karner blue butterflies in Wisconsin, USA, comparable estimates are required because each year a different selection of sites will be monitored. Annual state-wide indices of species abundance can be derived from the site-surveys and compared to previous year's indices to monitor trends. We advocate that line transect sampling is preferable to Pollard-Yates transects as a survey technique for monitoring Karner blue butter- flies. The Pollard-Yates surveys do not adjust for diferences in site detectability. As a consequence, estimates of among-site from Pollard-Yates surveys can be biased. © Rapid Science 1998     

U(VI) adsorption on aquifer sediments at the Hanford Site

Aquifer sediments collected via split-spoon sampling in two new groundwater wells in the 200-UP-1 operable unit at the Hanford Site were characterized and showed typical Ringold Unit E Formation properties dominated by gravel and sand. High iron-oxide content in Fe oxide/clay coatings caused the highest U(VI) adsorption as quantified by batch K(d) values, indicating iron oxides are the key solid adsorbent in the 200-UP-1 sediments that affect U(VI) fate and mobility. Even though U(VI) adsorption on the gravel-sized fraction of the sediments is considered to be negligible, careful characterization should be conducted to determine U(VI) adsorption on gravel, because of presence of Fe oxides coatings and diffusion-controlled adsorption into the gravel particles' interior surfaces. A linear adsorption isotherm was observed up to 10(-6) M (238 microg/L) of total U(VI) concentration in batch U(VI) adsorption tests with varying total U(VI) concentrations in spiked groundwater. U(VI) adsorption decreased with increasing concentrations of dissolved carbonate, because strong anionic aqueous uranium-carbonate complexes formed at high pH and high alkalinity conditions. Noticeable uranium desorption hysteresis was observed in a flow-through column experiment, suggesting that desorption K(d) values for aged uranium-contaminated sediments at the Hanford Site can be larger than adsorption K(d) values determined in short-term laboratory experiments and slow uranium release from contaminated sediments into the groundwater is expected.     

Toxicity of cobalt-complexed cyanide to <Emphasis Type="Italic">Oncorhynchus mykiss,Daphnia magna</Emphasis>, and <Emphasis Type="Italic">Ceriodaphnia dubia</Emphasis>

Background Cobalt cyanide complexes often result when ore is treated with cyanide solutions to extract gold and other metals. These have recently been discovered in low but significant concentrations in effluents from gold leach operations. This study was conducted to determine the potential toxicity of cobalt-cyanide complexes to freshwater organisms and the extent to which ultraviolet radiation (UV) potentiates this toxicity. Tests were also conducted to determine if humic acids or if adaptation to UV influenced sensitivity to the cyanide complexes. Methods Rainbow trout (Oncorhynchus mykiss), Daphnia magna, and Ceriodaphnia dubia were exposed to potassium hexacyanocobaltate in the presence and absence of UV radiation, in the presence and absence of humic acids. Cyano-cobalt exposures were also conducted with C. dubia from cultures adapted to elevated UV. Results With an LC50 concentration of 0.38 mg/L, cyanocobalt was over a 1000 times more toxic to rainbow trout in the presence of UV at a low, environmentally relevant irradiance level (4 μW/cm² as UVB) than exposure to this compound in the absence of UV with an LC50 of 112.9 mg/L. Toxicity was immediately apparent, with mortality occurring within an hour of the onset of exposure at the highest concentration. Fish were unaffected by exposure to UV alone. Weak-acid dissociable cyanide concentrations were observed in irradiated aqueous solutions of cyanocobaltate within hours of UV exposure and persisted in the presence of UV for at least 96 hours, whereas negligible concentrations were observed in the absence of UV. The presence of humic acids significantly diminished cyanocobalt toxicity to D. magna and reduced mortality from UV exposure. Humic acids did not significantly influence survival among C. dubia. C. dubia from UV-adapted populations were less sensitive to metallocyanide compounds than organisms from unadapted populations. Conclusions The results indicate that metallocyanide complexes may pose a hazard to aquatic life through photochemically induced processes. Factors that decrease UV exposure such as dissolved organic carbon or increased pigmentation would diminish toxicity.     

Analysis and apportionment of organic carbon and fine particulate matter sources at multiple sites in the midwestern United States

Speciated fine particulate matter (PM2.5) data collected as part of the Speciation Trends Network at four sites in the Midwest (Detroit, MI; Cincinnati, OH; Indianapolis, IN; and Northbrook, IL) and as part of the Interagency Monitoring of Protected Visual Environments program at the rural Bondville, IL, site were analyzed to understand sources contributing to organic carbon (OC) and PM2.5 mass. Positive matrix factorization (PMF) was applied to available data collected from January 2002 through March 2005, and seven to nine factors were identified at each site. Common factors at all of the sites included mobile (gasoline)/secondary organic aerosols with high OC, diesel with a high elemental carbon/OC ratio (only at the urban sites), secondary sulfate, secondary nitrate, soil, and biomass burning. Identified industrial factors included copper smelting (Northbrook, Indianapolis, and Bondville), steel/manufacturing with iron (Northbrook), industrial zinc (Northbrook, Cincinnati, Indianapolis, and Detroit), metal plating with chromium and nickel (Detroit, Indianapolis, and Bondville), mixed industrial with copper and iron (Cincinnati), and limestone with calcium and iron (Bondville). PMF results, on average, accounted for 96% of the measured PM2.5 mass at each site; residuals were consistently within tolerance (+/-3), and goodness-of-fit (Q) was acceptable. Potential source contribution function analysis helped identify regional and local impacts of the identified source types. Secondary sulfate and soil factors showed regional characteristics at each site, whereas industrial sources typically appeared to be locally influenced. These regional factors contributed approximately one third of the total PM2.5 mass, on average, whereas local mobile and industrial sources contributed to the remaining mass. Mobile sources were a major contributor (55-76% at the urban sites) to OC mass, generally with at least twice as much mass from nondiesel sources as from diesel. Regional OC associated with secondary sulfate and soil was generally low.