广州市餐厨垃圾不同处置方式的经济与环境效益比较

对广州市餐厨垃圾采用填埋、焚烧、综合处理3种处置方式的经济和环境效益进行了对比分析。结果表明,对于一座日处理能力为500t的餐厨垃圾处理厂而言,如果采用制取沼气和提炼生物柴油的综合处理方式,则年处置费用约为3833万元,年运输成本约为1825万元,年总收益(主要为出售生物柴油和发电)为7093万元,年净收益可达1435万元;一座日处理能力为500t的餐厨垃圾处理厂通过综合处理提炼的生物柴油若替代普通柴油使用,则每年可减少CO2排放量达110000t,而且餐厨垃圾厌氧发酵过程中产生的CO2也能被有效回收并加以利用。总体来说,综合处理方式既实现了餐厨垃圾的资源化有效利用,也达到了低污染排放的目的,经济与环境效益均达最佳。     

Atmospheric deposition of phthalate esters in a subtropical city

In Chinese cities, air pollution has become a serious and aggravating environmental problem undermining the sustainability of urban ecosystems and the quality of urban life. Bulk atmospheric deposition samples were collected two-weekly, from February 2007 to January 2008, at three representative areas, one suburban and two urbanized, in the subtropical city, Guangzhou, China, to assess the deposition fluxes and seasonal variations of phthalate esters (PAEs). Sixteen PAE congeners in bulk deposition samples were measured and the depositional fluxes of ∑₁₆PAEs ranged from 3.41 to 190 μg m^?2 day^?1, and were highly affected by local anthropogenic activities. The significant relationship between PAEs and particulate depositional fluxes (correlation coefficient R² = 0.72, P < 0.001) showed PAEs are associated primarily with particles. Temporal flux variations of PAEs were influenced by seasonal changes in meteorological parameters, and the deposition fluxes of PAEs were obviously higher in wet season than in dry season. Diisobutyl phthalate (DiBP), Di-n-butyl phthalate (DnBP), and Di(2-ethylhexyl) phthalate (DEHP) dominated the PAE pattern in bulk depositions, which is consistent with a high consumption of the plasticizer market in China. PAE profiles in bulk deposition showed similarities exhibited in both time and space, and a weak increase of high molecular weight PAE (HMW PAE) contribution in the wet season compared to those in the dry season. Average atmospheric deposition fluxes of PAEs in the present study were significantly higher than those from other studies, reflecting strong anthropogenic inputs as a consequence of rapid industrial and urban development in the region.     

好氧颗粒污泥同时脱氮除磷技术研究

采用序批式活性污泥法(SBR)处理新疆油田公司准东石油基地污水,作为生物膜的一种特殊形式,介绍了该工艺的优点,在适宜的运行条件下进行实验。讨论了好氧颗粒污泥脱氮以及除磷的过程,分析了该工艺对氮、磷的去除率及好氧颗粒污泥在好氧、缺氧条件下的吸磷情况,当进水氨氮、磷和乙酸碳浓度分别为38.2 mg/L、27.7 mg/L和134.6 mg/L,MLSS和MLVSS分别为7.0 mg/L、6.4 mg/L时,氨氮、总无机氮、磷、乙酸碳的平均去除率分别达到98.8%、90.2%、98.9%、97.2%.     

层燃螺旋炉排焚烧技术处理含油污泥研究

通过对几种含油污泥无害化处理技术的比选,分析不同处理技术物耗、能耗情况,优选出经济有效的含油污泥焚烧技术,结合新疆油田含油污泥的特点,采用层燃螺旋炉排焚烧技术,利用其燃烧热能生产蒸汽用于原油生产,采用余热吸收急冷与碱液半干法除酸技术,有效控制了二次污染;采用布袋除尘与烟尘固化技术确保了烟气达标排放。年节省成本支出3095.88万元。     

Reduction of Baltic Sea Nutrient Inputs and Allocation of Abatement Costs Within the Baltic Sea Catchment

The Baltic Sea Action Plan (BSAP) requires tools to simulate effects and costs of various nutrient abatement strategies. Hierarchically connected databases and models of the entire catchment have been created to allow decision makers to view scenarios via the decision support system NEST. Increased intensity in agriculture in transient countries would result in increased nutrient loads to the Baltic Sea, particularly from Poland, the Baltic States, and Russia. Nutrient retentions are high, which means that the nutrient reduction goals of 135 000 tons N and 15 000 tons P, as formulated in the BSAP from 2007, correspond to a reduction in nutrient loadings to watersheds by 675 000 tons N and 158 000 tons P. A cost-minimization model was used to allocate nutrient reductions to measures and countries where the costs for reducing loads are low. The minimum annual cost to meet BSAP basin targets is estimated to 4.7 billion €.     

用于磷吸附的载铁(β-FeOOH)沸石制备及特性简

以天然沸石为载体,采用FeCl₃水解法制备用于磷吸附的载铁沸石（β-FeOOH-Z）,优化β-FeOOH-Z的制备条件,包括FeCl₃溶液浓度、负载pH值、负载时间、负载温度和烘干温度,并利用X射线衍射（XRD）和傅里叶变换红外光谱（FTIR）对β-FeOOH-Z及其磷吸附特性进行分析。结果表明,β-FeOOH-Z的优化制备条件为：FeCl₃溶液浓度1 mol/L、负载pH值6、负载时间24 h、负载温度25℃和烘干温度60℃。优化制备条件下,100~120目沸石的载铁量为100.2 mg/g,铁的负载率为18%,其磷吸附量为7.68 mg/g,比天然沸石提高79.6%。XRD分析结果表明,β-FeOOH-Z中的杂质元素较天然沸石减少,并有效负载β-FeOOH;制备条件对β-FeOOH-Z的成分有较大影响,FeCl₃溶液浓度较低、负载温度和烘干温度过高均使β-FeOOH-Z中含有α-Fe₂O₃,并导致其磷吸附效率降低。FTIR分析结果表明,β-FeOOH-Z的表面羟基在其吸附磷过程中起重要作用,羟基与磷酸根离子的配位交换是β-FeOOH-Z吸附磷的主要作用机制。     

MCM-41介孔分子筛的合成及其对铜离子的吸附性能简

以微硅粉为硅源,CTAB和PEG-6000为模板剂,合成MCM-41介孔分子筛。采用XRD、N₂吸附-脱附曲线、FTIR以及TEM表征了其结构、比表面积、孔径分布及晶体形貌,并且以该样品为吸附剂,对含Cu²⁺的溶液进行了静态吸附实验。结果表明,以微硅粉为硅源成功合成了具有典型六方排列孔道结构的MCM-41,其比表面积为869.5 m²/g,孔容为0.97 cm³/g,平均孔径为3.3 nm;溶液pH为5~6时,MCM-41对Cu²⁺的去除效果最好;MCM-41对Cu²⁺的最大吸附吸附容量36.3 mg/g;MCM-41对Cu²⁺的吸附性能符合Langmuir吸附方程的特征。动力学研究表明,该过程符合准二级动力学模型。     

船舶塑料垃圾热解特性及动力学分析

利用热重分析(TGA)研究船舶塑料垃圾在不同升温速率和不同气氛下的热解特性,并得到了热解动力学参数。结果表明,船舶塑料垃圾的热解过程主要有3个阶段,比一般塑料热解复杂;随着升温速率增大,最大热解速率和最大热解速率温度等热解特性参数也增大,反应变得更剧烈;N2/CO2比为4∶1时,热解反应进行得最完全,固体残留率最少。动力学分析表明,采用3个连续一级反应模型能很好地拟合实验数据;不同的升温速率和气氛比对反应各阶段活化能均有不同程度的影响。     

络合萃取技术分离制药废水中的金刚烷胺

以P204为络合剂萃取水溶液中的金刚烷胺,研究了正辛醇和煤油2种稀释剂对萃取效果的影响,分析了萃取过程的络合机理和热力学过程,并考察了该萃取体系对实际制药废水中金刚烷胺的萃取效果。结果表明,采用P204/正辛醇=3∶2的复配萃取剂,在初始pH为8.0,在油/水相比为1∶1的条件下,金刚烷胺的萃取效率可以达到99.8%以上;以2.0mol/L的HCl溶液为反萃取剂,可以将51.1%的负载金刚烷胺反萃回收;红外光谱分析表明,P204对金刚烷胺的萃取遵循离子交换和离子缔合成盐机制;萃取过程为放热过程,低温条件下有利于萃取反应的进行;P204/正辛醇复配萃取剂对实际制药废水中的金刚烷胺也具有很高的萃取效率。     

CdIn2S4/复合材料的制备及光降解罗丹明B

利用高压静电纺丝技术,制得含有羧基的导电聚合物纤维(聚偏氟乙烯/苯乙烯-马来酸酐共聚物/纳米石墨),高温水热条件下在纤维表面制备CdIn2S4颗粒,得到CdIn2S4/导电聚合物纤维复合材料。运用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱仪(UV-Vis)和热失重分析仪(TGA)对复合材料的结构进行表征。并利用350 W氙灯模拟太阳光进行光催化降解罗丹明B。结果发现,CdIn2S4/导电聚合物纤维复合材料的降解效率高于CdIn2S4粉体和Degussa P25 TiO2粉体,光催化降解3 h,罗丹明B的降解率为96.2%。