零价铁催化过二硫酸盐降解苯胺

采用Fe⁰催化过二硫酸钠（PS）降解水中苯胺（AN）。在Fe⁰-PS体系中,Fe⁰在酸性条件下被氧化生成Fe²⁺,Fe²⁺可以催化PS产生强氧化性的SO₄^#x02022;-,发生类Fenton试剂氧化反应,从而降解AN。实验结果表明,在PS加入量为6.0mmol/L、Fe⁰加入量为35.7mmol/L、反应时间为120min的条件下,AN降解率可达81.4%,TOC去除率达52.6%,一级反应速率常数为0.03819min^-1。     

Morphological characteristics of waste polyethylene/polypropylene plastics during pyrolysis and representative morphological signal characterizing pyrolysis stages

In this work, the morphological characteristics of waste polyethylene (PE)/polypropylene (PP) plastics during their pyrolysis process were investigated, and based on their basic image changing patterns representative morphological signals describing the pyrolysis stages were obtained. PE and PP granules and films were used as typical plastics for testing, and influence of impurities was also investigated. During pyrolysis experiments, photographs of the testing samples were taken sequentially with a high-speed infrared camera, and the quantitative parameters that describe the morphological characteristics of these photographs were explored using the “Image Pro Plus (v6.3)” digital image processing software. The experimental results showed that plastics pyrolysis involved four stages: melting, two stages of decomposition which are characterized with bubble formation caused by volatile evaporating, and ash deposition; and each stage was characterized with its own phase changing behaviors and morphological features. Two stages of decomposition are the key step of pyrolysis since they took up half or more of the reaction time; melting step consumed another half of reaction time in experiments when raw materials were heated up from ambient temperatures; and coke-like deposition appeared as a result of decomposition completion. Two morphological signals defined from digital image processing, namely, pixel area of the interested reaction region and bubble ratio (BR) caused by volatile evaporating were found to change regularly with pyrolysis stages. In particular, for all experimental scenarios with plastics films and granules, the BR curves always exhibited a slowly drop as melting started and then a sharp increase followed by a deep decrease corresponding to the first stage of intense decomposition, afterwards a second increase – drop section corresponding to the second stage of decomposition appeared. As ash deposition happened, the BR dropped to zero or very low values. When impurities were involved, the shape of BR curves showed that intense decomposition started earlier but morphological characteristics remained the same. In addition, compared to parameters such as pressure, the BR reflects reaction stages better and its change with pyrolysis process of PE/PP plastics with or without impurities was more intrinsically process correlated; therefore it can be adopted as a signal for pyrolysis process characterization, as well as offering guide to process improvement and reactor design.     

Determination of Motor Vehicle Profiles for Non-Methane Organic Compounds in the Mexico City Metropolitan Area

ABSTRACT

Non-methane organic compound (NMOC) profiles for on-road motor vehicle emissions were measured in a downtown tunnel and parking garages in Mexico City during 1996. Hydrocarbon samples from the tunnel and ambient air samples (C2-C12) were collected using stainless steel canisters, and carbonyl compounds were collected using 2,4-dinitrophenylhydrazine (DNPH) impregnated cartridges. Canister samples were analyzed by gas chromatog-raphy/flame ionization detection (GC/FID) to ascertain detailed hydrocarbon composition. DNPH samples were analyzed by high performance liquid chromatography (HPLC). NMOC source profiles were quantified for evaporative emissions from refueling, cold start, and hot soak, and on-road operating conditions. The ultimate purpose will be to determine the apportionment of ambient NMOC concentrations using the Chemical Mass Balance (CMB) model. The tunnel profile contained 42.3 ppbC% of alkanes, 20.6 ppbC% of unsaturated compounds, and 22.4 ppbC% of aromatics. The most abundant species were acetylene with 7.22 ppbC%, followed by ipentane with 5.69 ppbC%, and toluene with 5.42 ppbC%. These results were compared with those from studies in the United States. The cold start profile was found to be similar to the tunnel profile, although there were differences in the content of acetylene, isopentane, and oxygenates. The abundance of saturated NMOC in the hot soak profile was similar to gasoline head space profiles; it was also much larger than saturated NMOC in the roadway profile.     

Seasonal variability of polychlorinated biphenyls (PCBs) and polychlorinated diphenyl ethers (PBDEs) congener profiles in butter in Poland: Dietary risk evaluation

Various statistical methods have been employed to analyse in details seasonal diversification of polychlorinated biphenyl (PCB)/polybrominated diphenyl ether (PBDE) congener profiles found in butter fat. The variability of the PCB/PBDE congener profiles indicates the presence of various sources of the milk fat contamination. The obtained results suggest that the environmental chemical background has the highest share in the contamination sources pattern. Ion trap mass spectrometry coupled to high-resolution gas chromatography with semi-permeable membrane dialysis sample cleanup was used for determination of PCBs and PBDEs in milk fat. Determined butter fat PCB profiles were similar to the profiles characteristic for Aroclor 1254 technical mixture. Our data indicate that dietary intake of PCB/PBDE with milk and milk products may be estimated to be about 717.5 pg kg b.w.^?1 day^?1 for six-indicator PCBs, 0.329 (equivalent toxicity, TEQ) pg kg b.w.^?1 day^?1 for 12 DL PCBs and 50 pg kg b.w.^?1 day^?1 for PBDEs (sum of 14 congeners).     

Removal of NOx from Flue Gas with Iron Filings Reduction Following Complex Absorption in Ferrous Chelates Aqueous Solutions

Abstract

A novel process for removal of nitrogen oxides (NO_x) from flue gases with iron filings reduction following complex absorption in iron-ethylenediaminetetraacetic acid aqueous solution is proposed. The reaction mechanism involved in the process is discussed briefly. The parameters influencing the process, including the concentration of ferrous chelates, initial pH, amount of iron filings, temperature, flow rate of the flue gas, and inlet nitric oxide concentration and oxygen content of the flue gas, are researched in detail. The optimal NO_x removal conditions are established. The regeneration and circular utilization of the absorption solution also is studied.     

高效石油烃降解菌SKD-1的分离、筛选及其降解性能

从孤岛油田石油污染土壤中分离到一株高效石油降解菌,命名为SKD-1。该菌株菌落表面湿润光滑、边缘整齐、圆形、不透明、乳黄色,能够利用葡萄糖和淀粉作为其生长的碳源和能源,其最适生长环境为碱性（pH8-10）,在分别以正十六烷烃和原油为惟一碳源,温度为30℃,摇床（180r／min）培养的条件下,菌株SKD-1的降解率分别为66．1％和36．9％。16SrRNA基因序列分析表明,菌株SKD-1与不动杆菌AcinetobactercalcoaceticusSY-1同源性达99％。结合菌株SKD．1菌落形态、理化性质以及系统发育分析,可以鉴定菌株SKD-1属于不动杆菌属（Acinetobactersp．）,序列登录号为AB774229。     

滚筒式生物反应器的设计及应力分析

针对城市生活垃圾好氧堆肥的处理工艺,设计一种用于好氧堆肥的滚筒式生物反应器。滚筒式生物反应器的设计主要包括主体结构设计,及反应器主体结构强度模拟分析。应用赫兹接触理论对支承装置中滚圈与托轮之间的接触应力进行计算。同时,结合ANSYS中不分离的接触方式模拟分析支承装置的接触应力,得出支承装置接触应力的分布规律,并将理论计算结果与ANSYS模拟结果进行对比。     

不同纳米修复剂对污染土壤中胡萝卜吸收、转运Cd的影响

通过盆栽实验研究不同纳米修复剂(羟基磷灰石HAP、赤泥RM、Fe3O4、胡敏酸-Fe3O4)对2种不同污染土壤Cd吸收、转运的影响。结果表明,上述纳米修复剂均可显著增加胡萝卜植株生物量,显著提高植株Cd胁迫的耐受指数;不同土壤施用不同纳米修复剂均显著降低胡萝卜植株Cd的含量,并且随着修复剂施加浓度的增加而显著降低;与对照相比,植株茎叶Cd含量最大降低达78.8%,根中Cd的含量最大降低67.8%;添加不同修复剂能不同程度地降低了土壤中Cd的转运系数和富集系数,这可能与施用不同纳米修复剂促进了土壤中非残留态Cd向残留态Cd的转化有关,总体而言,不同纳米型修复剂对降低Cd的有效性顺序为:RM～HAP>胡敏酸-Fe3O4>Fe3O4。     

磁性纳米吸附剂Fe3O4·ZrO(OH)2的合成及对水中氟和砷的吸附性能

用共沉淀法将ZrOCl2·8H2O包裹在磁性纳米Fe3O4表面,合成了一种针对高浓度含砷含氟废水的高效新型磁性纳米吸附剂Fe3O4·ZrO(OH)2.研究考察了吸附剂对氟和砷的吸附容量、反应平衡时间以及pH对吸附效果的影响.实验表明,磁性纳米Fe3O4·ZrO(OH)2吸附剂对水中F-和As(Ⅲ/Ⅴ)等温吸附模型符合Langmuir和Freundlich模型.对溶液中总氟和总砷的吸附容量分别可达70.42 mg/g和133.33 mg/g.通过拟二级动力学方程可得知吸附过程在20 min左右即可达到平衡.随着pH的不断增加,吸附剂对氟的吸附容量逐渐降低,而对砷的吸附量则是先增加后减少.     

叠式空气隙膜蒸馏组件膜污染实验研究

采用一种具有旋流结构的多层层叠式空气隙膜蒸馏膜组件,以20 g/L氯化钠盐水为热工质,考察在70℃条件下膜污染情况,实验结果表明,一个周期的连续运行和间歇性操作膜表面在高温下较快进入膜污染,8个周期后膜通量下降为初始通量的42%。膜表面有大量黄色附着物,电镜SEM分析显示,膜表面被不均匀堆积的颗粒状污染物及长方体结晶物覆盖,能谱EDS分析,污染物有极少量NaCl结晶的Na、Cl元素,还有O、C、Mg、Cu和Fe等元素。污染膜经5%盐酸溶液清洗后无机垢沉淀被去除,表观效果较好。