Global variability of food waste chemical composition and its consequences on the production of biofuels and chemical compounds

Journal of Material Cycles and Waste Management - The use of food waste (FW) for the production of biofuels and value-added compounds is growing worldwide. However, the significant chemical...     

Recycling extruded polystyrene by dissolution with suitable solvents

The amount of extruded polystyrene (XPS) waste has increased in recent years due to the increase of its use in the thermal insulation of buildings, transport vehicles, and refrigerators, among others. Dissolution with suitable solvents to achieve a volume reduction of more than 100 times without degradation of polymer chains is one of the cheapest and most efficient methods of recycling XPS. Several environmentally friendly solvents have been tested as dissolution agents for XPS volume reduction; the action of these solvents does not produce any degradation of polymer chains. The solubility of the polymer in such solvents at different temperatures was investigated. The solvent can be easily recycled by distillation, obtaining a high-quality recycled polymer. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Exploration and exploitation of food sources by social insect colonies: a revision of the scout-recruit concept

Social insect colonies need to explore and exploit multiple food sources simultaneously and efficiently. At the individual level, this colony-level behaviour has been thought to be taken care of by two types of individual: scouts that independently search for food, and recruits that are directed by nest mates to a food source. However, recent analyses show that this strict division of labour between scouts and recruits is untenable. Therefore, a modified concept is presented here that comprises the possible behavioural states of an individual forager (novice forager, scout, recruit, employed forager, unemployed experienced forager, inspector and reactivated forager) and the transitions between them. The available empirical data are reviewed in the light of both the old and the new concept, and probabilities for the different transitions are derived for the case of the honey-bee. The modified concept distinguishes three types of foragers that may be involved in the exploration behaviour of the colony: novice bees that become scouts, unemployed experienced bees that scout, and lost recruits, i.e. bees that discover a food source other than the one to which they were directed to by their nest mates. An advantage of the modified concept is that it allows for a better comparison of studies investigating the different roles performed by social insect foragers during their individual foraging histories. Received: 29 December 1999 / Revised: 25 February 2000 / Accepted: 16 October 2000     

深圳市公路建设对生态环境的影响、治理及对策

公路建设曾经给深圳的生态环境造成了较为严重的危害 ,主要有 :严重的水土流失及其派生影响 ,对一些具有观赏价值的自然景观产生破坏 ,影响了部分区域动植物生存环境等。主要对这些环境影响及已进行的治理及其成效进行综述 ,对治理工作的不足及未来对策也进行了探讨。     

Toxicity Identification Evaluation (Phase I) of water and sediment samples from a tropical reservoir contaminated with industrial and domestic effluents

The Funil Reservoir (Rio de Janeiro State, Brazil) is an environment degraded by constant discharge of nutrients and pollution coming from the most industrialized region of the country. As a consequence of eutrophication, there are continuous cyanobacteria blooms, which cause acute and chronic toxicity to zooplankton. In this context, Phase I of Toxicity Identification Evaluation (TIE) was performed on Daphnia similis using water and interstitial water from the reservoir, with the aim of identifying classes of compounds responsible for toxicity. The results indicated that water toxicity was due to cyanobacteria resulting from blooms in the reservoir and surfactants. Metals, especially copper, contributed to sediment toxicity. This research is the first attempt to describe the nature of toxicity in this reservoir using this method.     

Publicly available datasets on thallium (Tl) in the environment—a comment on <Emphasis Type="Italic">“Presence of thallium in the environment: sources of contaminations,distribution and monitoring methods”</Emphasis> by Bozena Karbowska,Environ Monit Assess (2016) 188:640 (DOI 10.1007/s10661-016-5647-y)

This comment highlights a whole series of datasets on thallium concentrations in the environment that were overlooked in the recent review by Karbowska, Environmental Monitoring and Assessment, 188, 640, 2016 in this journal. Geochemical surveys carried out over the last few decades all over the world at various scales and using different sampling media have reported the concentration of thallium (and dozens more elements) in tens of thousands of samples. These datasets provide a ‘real-world’ foundation upon which source apportionment investigations can be based, monitoring programs devised and modelling studies designed. Furthermore, this comment also draws attention to two global geochemical mapping initiatives that should be of interest to environmental scientists.     

A comparison of two stomatal conductance models for ozone flux modelling using data from two Brassica species

In this study we tested and compared a multiplicative stomatal model and a coupled semi-empirical stomatal-photosynthesis model in their ability to predict stomatal conductance to ozone (g_st) using leaf-level data from oilseed rape (Brassica napus L.) and broccoli (Brassica oleracea L. var. italica Plenck). For oilseed rape, the multiplicative model and the coupled model were able to explain 72% and 73% of the observed g_st variance, respectively. For broccoli, the models were able to explain 53% and 51% of the observed g_st variance, respectively. These results support the coupled semi-empirical stomatal-photosynthesis model as a valid alternative to the multiplicative stomatal model for O₃ flux modelling, in terms of predictive performance.     

Aerosol trace metals,particle morphology and total gaseous mercury in the atmosphere of Oxford,UK

An investigation of atmospheric trace metals was conducted in Oxford, UK, a small city ～60 miles northwest of London, in 2007 and 2008. Concentrations of Sr, Mo, Cd, Pb, V, Cr, Mn, Fe, Co, Ni, Cu and Zn in aerosol were measured in bulk and size segregated samples. In addition, total gaseous mercury (TGM) concentrations were monitored semi-continuously by cold vapour-atomic fluorescence spectroscopy. Metal concentrations in Oxford were intermediate between previously reported levels of UK rural and urban areas for most metals studied and levels of Cd, Ni and Pb were within European guidelines. Metal concentrations appeared to be influenced by higher traffic volume on a timescale of hours. The influence of traffic on the aerosols was also suggested by the observation of carbonaceous particles via scanning electron microscopy (SEM). Air mass back trajectories suggest air masses arriving in Oxford from London and mainland Europe contained the highest metal concentrations. Aerosol samples collected over Bonfire Weekend, a period of intense firework use and lighting of bonfires in the UK, showed metal concentrations 6–46 times higher than at other times. Strontium, a tracer of firework release, was present at higher concentrations and showed a change in its size distribution from the coarse to fine mode over Bonfire Weekend. The presence of an abundance of spherical Sr particles was also confirmed in SEM images. The average TGM concentration in Oxford was 3.17 ng m^?3 (st. dev. 1.59) with values recorded between 1.32 and 23.2 ng m^?3. This is a higher average value than reported from nearby rural locations, although during periods when air was arriving from the west, similar concentrations to these rural areas were seen in Oxford. Comparison to meteorological data suggests that TGM in Oxford's air is highest when wind is arriving from the east/southeast. This may be due to emissions from London/mainland Europe with a possible contribution from emissions from a local crematorium situated 4 miles east of the sampling site. A diurnal pattern was also observed in the TGM data with a minimum concentration during the day when mercury may have been diluted by thermal mixing of the atmospheric boundary layer. Additionally, this diurnal pattern may reflect variations in a local source of TGM.     

Assessment of current serum levels of PCDD/Fs, dl-PCBs and PBDEs in a Dutch cohort with known perinatal PCDD/F exposure

As part of a longitudinal cohort study, now in its second decade, we determined PCDDs/Fs dl-PCBs and PBDEs in serum of adolescents with known perinatal PCDD/F exposure. Of the original cohort, 33 adolescents aged 14-19 years, who had been studied previously during their neonatal (n=60), toddler and pre-pubertal period (n=41) agreed to participate in the current follow-up. PCDD/F-, dl-PCB- and PBDE congeners were measured using GC/MS. Current serum levels of PCDD/Fs determined in our cohort were relatively low (mean of 2.2pg/g) compared to the perinatal exposure. No correlation between perinatal exposure and current serum PCDD/F was found. Planar PCB TEQ levels were 2.2pg/g. Current summation operatorPBDE levels were 8.7ng/g lipid. There was one outlier with a summation operatorPBDE of 74ng/g lipid. The presence of this high value indicates that the exposure pathway is different from PCDD/F and PCB, most likely by dust and food contaminated with dust. Concluding we can say that current PCDD/F levels are quite low compared to the perinatal PCDD/F exposure of the cohort. PBDE levels however are relatively high compared to other European countries, more research on possible health effects of these levels, especially for subjects with outlier concentrations, should be performed.     

Mass balance to assess the efficiency of a mechanical-biological treatment

Using mechanical-biological treatment of residual municipal solid waste, it is possible to significantly lower landfill volume and gas and leachate emissions. Moreover, the landfill characteristics are improved. The performance of the Mende (France) mechanical-biological treatment plant is assessed via mass balances coupled with manual sorting according to the MODECOMtrade mark methodology and biochemical methane potential after 90 days of incubation. The site includes mechanical sorting operations, a rotary sequential bioreactor, controlled aerobic stabilisation corridors, maturation platforms, and a sanitary landfill site for waste disposal in separated cells. Results showed that several steps could be improved: after a first sieving step, about 12% of the potentially biodegradable matter is landfilled directly without any treatment; mechanical disintegration of papers and cardboards in the rotary sequential bioreactor is insufficient and leads to a high proportion of papers and cardboards being landfilled without further treatment. Two fine fractions go through stabilisation and maturation steps. At the end of the maturation step, about 54% of the potentially biodegradable matter is degraded. The biochemical methane potential after 90 days of incubation is reduced by 81% for one of the two fine fractions and reduced by 88% for the other one. Considering the whole plant, there is a reduction of nearly 20% DM of the entering residual municipal solid waste.