Use of acid preconditioning for enhanced dewatering of wastewater treatment sludges from the pulp and paper industry.

In municipal and industrial practices, wastewater treatment sludges are generally conditioned with organic polymers before dewatering. The dewatering polymers are expensive and contribute significantly to the overall sludge management cost. This paper discusses a preconditioning strategy that holds great promise for enhancing dewatering properties of wastewater treatment sludges, while reducing the cost. In this approach, the waste activated sludge (WAS) is briefly preconditioned with an acid before flocculating with an organic polymer. Experimental results showed that acid preconditioning significantly enhanced dewatering. Separately acidifying WAS and subsequently combining it with primary sludge produced higher presscake solids than acidifying the combined sludge to the same final pH. Acidification exhibited the added benefit of reducing Escherichia coli counts in sludge, thus improving its biological character. This may provide flexibility in choosing a beneficial use application.     

Effect of DTPA on Cd solubility in soil – Accumulation and subsequent toxicity to lettuce

In a controlled environment experiment, using Cd spiked soil, lettuce plants were grown under a range of DTPA levels and were subsequently harvested to determine levels of phytoaccumulation. Cadmium phytoaccumulation significantly increased with increasing soil Cd level (P < 0.05) but unexpectedly decreased with increasing DTPA levels, despite the fact that solubility of Cd was increased in the soil. Cadmium translocation (from root to shoot) increased after DTPA application. Lettuce growth was inhibited by both Cd and DTPA (at and above 10 and 500 mg kg^?1 respectively), as a result of higher Cd mobility and subsequent toxicity which was caused by DTPA higher dosages. Metal solubility in the soil (ranged between 2.8 and 26.5 mg kg^?1) was found to be significantly higher (P < 0.01) as compared to control with increasing DTPA levels even after 3 months of DTPA application. Cadmium tissue concentration in all DTPA treatments was less than in the corresponding control treatment, indicating a negative effect of DTPA application on Cd uptake. In conclusion, lettuce was an unsuitable plant species for Cd accumulation, at least when associated with a DTPA chelator.     

Epidemiology of occupational accidents among Iranian insured workers

Work-related accidents are considered as a major health problem worldwide. The aim of present study was to determine the epidemiological pattern of occupational accidents among workers insured by the Iranian Social Security Organization (ISSO) between 2001 and 2005.Subjects consisted of all workers and drivers who had a work-related accident during 2001–2005 and were registered in the Iranian Social Security Organization (ISSO) database according to the inspection reports. An ordinal logistic regression model (proportional odds regression model) was used to assess the concurrent effects of independent variables on accident outcomes.Overall, 86,437 work-related accidents were investigated. The accidents were more frequent in metal workplaces and electrical industries, respectively. More than half of the accidents were due to incautious activities. Workers’ age (age at the time of accident) (OR = 0.99, CI: 0.989–0.994), gender (OR = 1.3, CI: 1.191–1.683), marital status (OR = 1.25, CI: 1.143–1.675) as well as accident setting (OR = 1.88, CI: 1.728–1.975) had significant effect on accident outcomes. Pattern of occupational injuries in Iran was consistent with the global pattern for accident outcomes.     

Cognitive failures, driving errors and driving accidents

INTRODUCTION: The impact of a driver's cognitive capability on traffic safety has not been adequately studied. This study examined the relationship between cognitive failures, driving errors and accident data. METHOD: Professional drivers from Iran (160 males, ages 18-65) participated in this study. The cognitive failures questionnaire (CFQ) and the driver error questionnaire were administered. The participants were also asked other questions about personal driving information. A principal component analysis with varimax rotation was performed to determine the factor structure of the CFQ. Poisson regression models were developed to predict driving errors and accidents from total CFQ scores and the extracted factors. RESULTS: Total CFQ scores were associated with driving error rates, but not with accidents. However, the 2 extracted factors suggested an increased effect on accidents and were strongly associated with driving errors. DISCUSSION: Although the CFQ was not able to predict driving accidents, it could be used to identify drivers susceptible to driving errors. Further development of a driving-oriented cognitive failure scale is recommended to help identify error prone drivers. Such a scale may be beneficial to licensing authorities or for developing driver selection and training procedures for organizations.     

Challenges to promoting eco-industry parks in Malaysia: A case study of Rawang Integrated Industrial Park

Journal of Material Cycles and Waste Management - Malaysia is a developing country, and its economic growth has caused the increase in the generation of industrial waste in terms of its volume. The...     

A simplified model for reservoir operation considering the water quality issues: Application of the Young conflict resolution theory

In this study, an algorithm combining a multi-objective genetic algorithm (GA)-based optimization model and a water quality simulation model is developed for determining a trade-off curve between objectives related to the allocated water quantity and quality. To reduce the run-time of the GA-based optimization model, the main problem is decomposed to long-term and annual optimization models. The reliability of water supply is considered to be the objective function in the long-term stochastic optimization model, but the objective functions of the annual models are related to both the allocated water quantity and quality. The operating policies obtained using this long-term model provide the time series of the optimum reservoir water storages at the beginning and the end of each water year. In the next step, these optimal reservoir storage values are considered as constraints for water storage in the annual reservoir operation optimization models. The epsilon-constraint method is then used to develop a trade-off curve between the reliability of water supply and the average allocated water quality. The Young conflict resolution theory, which incorporates the existing conflicts among decision-makers and stakeholders, is used for selecting the best solution on the trade-off curve. The monthly reservoir operating rules are then calculated using an Adaptive Neuro-Fuzzy Inference System, which is trained using the optimal operating policies. The proposed model is applied to the 15-Khordad Reservoir in the central part of Iran. The results show that this simplified procedure does not reduce the accuracy of the reservoir operating policies and it can effectively reduce the computational burden of the previously developed models.     

Remediation of pharmaceuticals from contaminated water by molecularly imprinted polymers: a review

Environmental Chemistry Letters - The release of pharmaceuticals into the environment induces adverse effects on the metabolism of humans and other living species, calling for advanced remediation...     

A novel driver hazard perception sensitivity model based on drivers’ characteristics: A simulator study

Objective: Considering the high annual number of fatal driving accidents in Iran, any approach for reducing the number or severity of driving accidents is a positive step toward decreasing accident-related losses. Accidents can often be avoided by a timely reaction of the driver. One of the steps before reacting to a hazard is perception. Some driver characteristics may affect road hazard perception. In this research, it was assumed that various driver characteristics, including demographic characteristics and cognitive characteristics, have an impact on driver perception.

Methods: The driving simulator used in this research provides various scenarios; for example, passing a pedestrian or animal across the road or placing fixed objects in a 2-lane separated rural road for 2 groups of experienced and inexperienced drivers under day and night lighting conditions. The go/no-go test was carried out in order to assess drivers’ attention to driving tasks and inhibitory control. A structural equation model (SEM) was used to estimate the relation between driver characteristics and sensitivity to road hazard perception. A new hazard perception index was proposed based on the time intervals in the hazard vulnerability.

Results: The results show that the most effective variables in the analysis of sensitivity to hazard perception are driving experience (in kilometers) during the last 3 years and road lighting conditions. Moreover, hazard perception sensitivity was improved by better inhibitory control, selective attention, and decision making, more carefulness, the average amount of daily sleep, and marital status.

Conclusion: The results of this research may be useful in educating and advertising programs. It also could enhance sensitivity to perception of hazards such as pedestrians, animals, and fixed obstacles among young and novice drivers.     

Application of a “closed-can” technique for measuring radon exhalation from mine samples of Punjab, Pakistan

Using the closed-can technique, radon exhalation rate measurements have been carried out for shale and coal samples collected from various mines located in the Chakwal and Makarwal areas of Pakistan. For the two areas, the measured average values of the exhalation rates from shale are 1.45±0.13 and 0.67±0.25 Bq m⁻² h⁻¹ and for coal are 1.0±0.03 and 0.65±0.32 Bq m⁻² h⁻¹, respectively. These values are much lower than the measured exhalation rates from alum-shale-based Nordic concrete which has values in the 50–200 Bq m⁻² h⁻¹ range. The lower values of the measured exhalation rates from the shale and coal deposits in the Chakwal and Makarwal areas are indicative of their lower uranium contents and mine workers in these areas do not face any abnormal health hazard due to radon since the exhalation rates have been found to be on the low side.     

Benchmarking in municipal solid waste recycling

The paper presents an analysis of the factors influencing the recycling potential of municipalities in Israel, including population size and density, geographic location, current waste levels, and current waste management system. We employ a standard regression analysis in order to develop an econometric model to predict where potential for economically efficient recycling is highest. By applying this model to readily available data, it is possible to predict with close to 90% accuracy whether or not recycling will be economically efficient in any given municipality. Government agencies working to promote advanced waste management solutions have at their disposal only limited resources and budget, and so must concentrate their efforts where they will be most effective. The paper thus provides policy-makers with a powerful tool to help direct their efforts to promote recycling at those municipalities where it is indeed optimal.