Acid Blue 25 adsorption on base treated Shorea dasyphylla sawdust: Kinetic, isotherm, thermodynamic and spectroscopic analysis

The potential of base treated Shorea dasyphylla (BTSD) sawdust for Acid Blue 25 (AB 25) adsorption was investigated in a batch adsorption process. Various physiochemical parameters such as pH, stirring rate, dosage, concentration, contact time and temperature were studied. The adsorbent was characterized with Fourier transform infrared spectrophotometer, scanning electron microscope and Brunauer, Emmett and Teller analysis. The optimum conditions for AB 25 adsorption were pH 2, stirring rate 500 r/min, adsorbent dosage 0.10 g and contact time 60 min. The pseudo second-order model showed the best conformity to the kinetic data. The equilibrium adsorption of AB 25 was described by Freundlich and Langmuir, with the latter found to agree well with the isotherm model. The maximum monolayer adsorption capacity of BTSD was 24.39 mg/g at 300 K, estimated from the Langmuir model. Thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined. It was found that AB 25 adsorption was spontaneous and exothermic.     

Contaminants of emerging concern: a review of new approach in AOP technologies

The presence of contaminants of emerging concern (CECs) such as pharmaceuticals and personal care products (PPCPs), endocrine-disrupting compounds (EDCs), flame retardants (FRs), pesticides, and artificial sweeteners (ASWs) in the aquatic environments remains a major challenge to the environment and human health. In this review, the classification and occurrence of emerging contaminants in aquatic environments were discussed in detail. It is well documented that CECs are susceptible to poor removal during the conventional wastewater treatment plants, which introduce them back to the environment ranging from nanogram per liter (e.g., carbamazepine) up to milligram per liter (e.g., acesulfame) concentration level. Meanwhile, a deep insight into the application of advanced oxidation processes (AOPs) on mitigation of the CECs from aquatic environment was presented. In this regard, the utilization of various treatment technologies based on AOPs including ozonation, Fenton processes, sonochemical, and TiO₂ heterogeneous photocatalysis was reviewed. Additionally, some innovations (e.g., visible light heterogeneous photocatalysis, electro-Fenton) concerning the AOPs and the combined utilization of AOPs (e.g., sono-Fenton) were documented.     

Evaluating the impact of GDP per capita on environmental degradation for G-20 economies: Does N-shaped environmental Kuznets curve exist?

Environment, Development and Sustainability - The extant literature reveals that scholars and policy makers are highly concerned about exploring the validity of the environmental Kuznets curve...     

Quantification of ultra-trace amounts of copper by using off-line solid phase extraction-flame atomic absorption spectrometric determination through the octadecyl silica-bonded phase membrane (OSPM) C18 disks impregnated with 2,2'-[ethane-1,2-diylbis(thio)]dianiline

This study reports a very selective, easy, and precise method for rapid separation of trace amounts of copper in aqueous samples using octadecyl silica-bonded phase membrane disks modified by 2,2'-[ethane-1,2-diylbis(thio)]dianiline (EDTD) combined with flame atomic absorption spectrometric determination. In addition, the synthesis and spectral characterization of EDTD have been described in detail. All the affecting experimental variables such as pH, amount of modifier, eluent type, sample and eluent flow rate, interfering ions, and disk capacity were also investigated. The target analyte (trace copper) was quantitatively retained at pH?=?4 and eluted with 6.0 mL of 0.5 M HNO₃ at flow rates of 40 and 10 mL min^?1 for analyte passage and elution steps, respectively, through the disks modified with 17.0 mg of EDTD. The proposed method also allows an enrichment factor of about 500 and has a detection limit of 0.005 ng mL^?1. The method has been successfully applied for isolation and determination of copper in different water samples, peppers, and standard alloys.     

Coupling of solvent-based de-emulsification dispersive liquid–liquid microextraction with high performance liquid chromatography for simultaneous simple and rapid trace monitoring of 2,4-dichlorophenoxyacetic acid and 2-methyl-4-chlorophenoxyacetic acid

A simple, rapid, and efficient sample pretreatment technique, based on solvent-based de-emulsification dispersive liquid–liquid microextraction (SD-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for simultaneous preconcentration and trace detection of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) in water and urine samples. Some parameters such as acidity of solution, the amount of salt, type, and volume of extraction solvents, type of disperser/de-emulsifier solvent, and its volume were investigated and optimized. Under optimum extraction conditions, the limits of detections (LODs) of this method for MCPA and 2,4-D were 0.2 and 0.6 μg L^?1 (based on 3S_b/m) in water and 0.4 and 1.6 μg L^?1 in urine, respectively. Furthermore, dynamic linear range of this method for MCPA and 2,4-D was 1–300 and 2–400 μg L^?1, repectively. Finally, the applicability of the proposed method was evaluated by extraction and determination of the herbicides in urine and different water samples.     

Reclaimed rockwool fibers for thermally stable palm oil-based polyurethane foam

Journal of Material Cycles and Waste Management - Due to its non-existent recyclability, industrial rockwool fiber wastes have caused environmental and waste management issues, which, therefore,...     

The analysis and probabilistic health risk assessment of polycyclic aromatic hydrocarbons in cereal products

Environmental Science and Pollution Research - The analysis and probabilistic health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in cereal products were done by using magnetic...     

An empirical bayes safety evaluation of tram/streetcar signal and lane priority measures in Melbourne

Objective: Streetcars/tram systems are growing worldwide, and many are given priority to increase speed and reliability performance in mixed traffic conditions. Research related to the road safety impact of tram priority is limited. This study explores the road safety impacts of tram priority measures including lane and intersection/signal priority measures.

Method: A before–after crash study was conducted using the empirical Bayes (EB) method to provide more accurate crash impact estimates by accounting for wider crash trends and regression to the mean effects. Before–after crash data for 29 intersections with tram signal priority and 23 arterials with tram lane priority in Melbourne, Australia, were analyzed to evaluate the road safety impact of tram priority.

Results: The EB before–after analysis results indicated a statistically significant adjusted crash reduction rate of 16.4% after implementation of tram priority measures. Signal priority measures were found to reduce crashes by 13.9% and lane priority by 19.4%. A disaggregate level simple before–after analysis indicated reductions in total and serious crashes as well as vehicle-, pedestrian-, and motorcycle-involved crashes. In addition, reductions in on-path crashes, pedestrian-involved crashes, and collisions among vehicles moving in the same and opposite directions and all other specific crash types were found after tram priority implementation.

Conclusions: Results suggest that streetcar/tram priority measures result in safety benefits for all road users, including vehicles, pedestrians, and cyclists. Policy implications and areas for future research are discussed.     

Removal of ibuprofen from synthetic wastewater using photocatalytic method in the presence of FeO photocatalyst supported on modified Iranian clinoptilolite

Environmental Science and Pollution Research - This study investigated the removal of an organic drug called ibuprofen from the wastewater containing this drug. Iron oxide supported on modified...     

Dissipation pattern and residual levels of boscalid in cucumber and soil using liquid chromatography-tandem mass spectrometry

Abstract

To stipulate the rationale of spraying doses and to determine the safe interval period of boscalid suspension concentrate (SC), the degradation dynamics and residual levels were investigated in cucumber and soil using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Field trials were conducted according to Chinese Guideline on pesticide residue trials. Following application, the degradation kinetics was best ascribed to first-order kinetic models with half-life of 2.67–9.90 d in cucumber. Spraying boscalid SC at 1.5-fold the recommended dosage yield terminal residues, which are clearly lower than the maximum residue limit (MRL) established by China (MRL =5?mg.kg^?1) in cucumber. At variance, the dissipation dynamics in soil did not fit to first-order kinetics and the half-life was more than 17?days, the finding which denotes that the degradation behavior of boscalid in soil proceeds slowly. It has therefore been shown that boscalid is safe for use on cucumbers under the recommended dosage.