Atmospheric composition change: Climate–Chemistry interactions

Chemically active climate compounds are either primary compounds like methane (CH₄), removed by oxidation in the atmosphere, or secondary compounds like ozone (O₃), sulfate and organic aerosols, both formed and removed in the atmosphere. Man-induced climate–chemistry interaction is a two-way process: Emissions of pollutants change the atmospheric composition contributing to climate change through the aforementioned climate components, and climate change, through changes in temperature, dynamics, the hydrological cycle, atmospheric stability, and biosphere-atmosphere interactions, affects the atmospheric composition and oxidation processes in the troposphere. Here we present progress in our understanding of processes of importance for climate–chemistry interactions, and their contributions to changes in atmospheric composition and climate forcing. A key factor is the oxidation potential involving compounds like O₃ and the hydroxyl radical (OH). Reported studies represent both current and future changes. Reported results include new estimates of radiative forcing based on extensive model studies of chemically active climate compounds like O₃, and of particles inducing both direct and indirect effects. Through EU projects like ACCENT, QUANTIFY, and the AeroCom project, extensive studies on regional and sector-wise differences in the impact on atmospheric distribution are performed. Studies have shown that land-based emissions have a different effect on climate than ship and aircraft emissions, and different measures are needed to reduce the climate impact. Several areas where climate change can affect the tropospheric oxidation process and the chemical composition are identified. This can take place through enhanced stratospheric–tropospheric exchange of ozone, more frequent periods with stable conditions favoring pollution build up over industrial areas, enhanced temperature induced biogenic emissions, methane releases from permafrost thawing, and enhanced concentration through reduced biospheric uptake. During the last 5–10 years, new observational data have been made available and used for model validation and the study of atmospheric processes. Although there are significant uncertainties in the modeling of composition changes, access to new observational data has improved modeling capability. Emission scenarios for the coming decades have a large uncertainty range, in particular with respect to regional trends, leading to a significant uncertainty range in estimated regional composition changes and climate impact.     

Longer-duration uses of tetracyclines and penicillins in U.S. food-producing animals: Indications and microbiologic effects

We review and analyze regulatory categories for longer duration of use (defined as ≥ 7 day) tetracyclines (TCs) and penicillins (PNs) approved for U.S. livestock and poultry, together with scientific studies, surveillance programs and risk assessments pertaining to antimicrobial resistance. Indications listed on a government database were grouped into three broad categories according to the terminology used to describe their use: disease control (C), treatment (T) and growth improvement (G). Consistent with mostly therapeutic uses, the majority (86%) of listed indications had C and/or T terms. Several studies showed interruption of early disease stages in animals and modulation of intestinal microflora. Longer-duration exposures are consistent with bacteriostatic modes of action, where adequate exposure time as well as concentration is needed for sufficient antimicrobial activity. Other effects identified included reduced animal pathogen prevalence, toxin formation, inflammation, environmental impacts, improved animal health, reproductive measures, nutrient utilization, and others. Several animal studies have shown a limited, dose-proportionate, selective increase in resistance prevalence among commensal animal bacteria following longer-duration exposures. Pathogen surveillance programs showed overall stable or declining resistance trends among sentinel bacteria. Quantitative, microbiologically detailed resistance risk assessments indicate small probabilities of human treatment failure due to resistance under current conditions. Evaluations of longer-duration uses of TCs, PNs, and other antimicrobial classes used in food-producing animals should consider mechanisms of activity, known individual- and population-level health and waste reduction effects in addition to resistance risks.     

Effect of herbicide and soil amendment on growth and photosynthetic responses in olive crops

Diuron [3-(3,4-dichlorophenyl)- = 1,1-dimethylurea] and simazine (6-chloro-N(2), N(4)-diethyl-1,3,5-triazine-2,4-diamine) are soil-applied herbicides used in olive crops. The objective of this study is to investigate the combined effect of these herbicides and the amendment of soil with an organic waste (OW) from the olive oil production industry on the growth and photosynthetic apparatus of adult olive trees and to compare the results with those obtained by Redondo-Gómez et al. for two-year-old trees. For this purpose, growth rate, gas exchange and chlorophyll fluorescence parameters were measured in 38-year-old olive trees, after one and two months of soil herbicide treatment and/or OW amendment. Soil co-application of OW and herbicide increases the quantum efficiency of Photosystem II (PSII) and the assimilation of CO(2) in olive trees, which led to a higher relative growth rate of the branches and leaves in length. Herbicide treatment reduced the photosynthetic efficiency in olive trees after two months of soil application, while this reduction is evident from week one in younger trees.     

Dual-camera, high-resolution aerial assessment of pipeline revegetation

Energy-extraction results in significant disturbance to rangelands in Wyoming and other western US states. Although reclamation is required by law, US General Accounting Office reports from 1999 and 2005 are clear that affected government agencies have--over much of the past decade--had difficulty accomplishing mandated environmental monitoring of extraction-related disturbance. We evaluated two pipeline rights of way (ROW) using nested images (1- or 2- with 13- or 20-mm ground sample distance (GSD)) acquired during Very-Large Scale Aerial (VLSA) surveys. Aerial monitoring allowed for the collection of large numbers of geocoded samples, and for subsequent cover measurements using methods with demonstrated accuracy equal to that of conventional ground-based methods. Both pipelines had vegetative-cover deficiencies relative to their Plan of Development (POD) requirements. Using bare ground and ground-cover measurements from the higher-resolution imagery, we present a spatial representation of each pipeline ROW that allows quick identification of sections of the ROW that may need further reclamation action to meet POD standards. We also present aerial monitoring costs. We recommend VLSA pipeline surveys as a means for facilitating required environmental monitoring and for addressing the monitoring backlog that has developed with increased energy-extraction activity.     

Verification of a depth-integrated sample arm as a means to reduce solids stratification bias in urban stormwater sampling

A new water sample collection system was developed to improve representation of solids entrained in urban stormwater by integrating water-quality samples from the entire water column, rather than a single, fixed point. The depth-integrated sample arm (DISA) was better able to characterize suspended-sediment concentration and particle size distribution compared to fixed-point methods when tested in a controlled laboratory environment. Median suspended-sediment concentrations overestimated the actual concentration by 49 and 7% when sampling the water column at 3- and 4-points spaced vertically throughout the water column, respectively. Comparatively, sampling only at the bottom of the pipe, the fixed-point overestimated the actual concentration by 96%. The fixed-point sampler also showed a coarser particle size distribution compared to the DISA which was better able to reproduce the average distribution of particles in the water column over a range of hydraulic conditions. These results emphasize the need for a water sample collection system that integrates the entire water column, rather than a single, fixed point to properly characterize the concentration and distribution of particles entrained in stormwater pipe flow.     

Chemical speciation studies on DU contaminated soils using flow field flow fractionation linked to inductively coupled plasma mass spectrometry (FlFFF-ICP-MS)

Flow field flow fractionation (FlFFF) in combination with inductively coupled plasma mass spectrometry (ICP-MS) was used to study the chemical speciation of U and trace metals in depleted uranium (DU) contaminated soils. A chemical extraction procedure using sodium pyrophosphate, followed by isolation of humic and fulvic substances was applied to two dissimilar DU contaminated sample types (a sandy soil and a clay-rich soil), in addition to a control soil. The sodium pyrophosphate fractions of the firing range soils (Eskmeals and Kirkcudbright) were found to contain over 50% of the total U (measured after aqua regia digestion), compared to approximately 10% for the control soil. This implies that the soils from the contaminated sites contained a large proportion of the U within more easily mobile soil fractions. Humic and fulvic acid fractions each gave characteristic peak maxima for analytes of interest (Mn, Fe, Cu, Zn, Pb and U), with the fulvic acid fraction eluting at a smaller diameter (approximately 2.1 nm on average) than the humic fraction (approximately 2.4 nm on average). DU in the fulvic acid fraction gave a bimodal peak, not apparent for other trace elements investigated, including natural U. This implies that DU interacts with the fulvic acid fraction in a different way to all other elements studied.     

Measuring Concentrations of Volatile Organic Compounds in Vinyl Flooring

ABSTRACT

The initial solid-phase concentration of volatile organic compounds (VOCs) is a key parameter influencing the emission characteristics of many indoor materials. Solid-phase measurements are typically made using solvent extraction or thermal headspace analysis. The high temperatures and chemical solvents associated with these methods can modify the physical structure of polymeric materials and, consequently, affect mass transfer characteristics.

To measure solid-phase concentrations under conditions resembling those in which the material would be installed in an indoor environment, a new technique was developed for measuring VOC concentrations in vinyl flooring (VF) and similar materials. A 0.09-m² section of new VF was punched randomly to produce ~200 0.78-cm² disks. The disks were milled to a powder at -140 °C to simultaneously homogenize the material and reduce the diffusion path length without loss of VOCs. VOCs were extracted from the VF particles at room temperature by fluidized-bed desorption (FBD) and by direct thermal desorption (DTD) at elevated temperatures. The VOCs in the extraction gas from FBD and DTD were collected on sorbent tubes and analyzed by gas chromatog-raphy/mass spectrometry (GC/MS). Seven VOCs emitted by VF were quantified. Concentration measurements by FBD ranged from 5.1 |ig/g VF for n-hexadecane to 130 |Jg/g VF for phenol. Concentrations measured by DTD were higher than concentrations measured by FBD. Differences between FBD and DTD results may be explained using free-volume and dual-mobility sorption theory, but further research is necessary to more completely characterize the complex nature of a diffusant in a polymer matrix.     

Integrating larval connectivity into the marine conservation decision-making process across spatial scales

Larval dispersal connectivity is typically integrated into spatial conservation decisions at regional or national scales, but implementing agencies struggle with translating these methods to local scales. We used larval dispersal connectivity at regional (hundreds of kilometers) and local (tens of kilometers) scales to aid in design of networks of no-take reserves in Southeast Sulawesi, Indonesia. We used Marxan with Connectivity informed by biophysical larval dispersal models and remotely sensed coral reef habitat data to design marine reserve networks for 4 commercially important reef species across the region. We complemented regional spatial prioritization with decision trees that combined network-based connectivity metrics and habitat quality to design reserve boundaries locally. Decision trees were used in consensus-based workshops with stakeholders to qualitatively assess site desirability, and Marxan was used to identify areas for subsequent network expansion. Priority areas for protection and expected benefits differed among species, with little overlap in reserve network solutions. Because reef quality varied considerably across reefs, we suggest reef degradation must inform the interpretation of larval dispersal patterns and the conservation benefits achievable from protecting reefs. Our methods can be readily applied by conservation practitioners, in this region and elsewhere, to integrate connectivity data across multiple spatial scales.     

Levels of dioxins in soil and corn tissues after 30 years of biosolids application

Detectable levels of dioxins have been reported in biosolids, but very little information is available on the effect of long-term application of biosolids on dioxins accumulation in soil and uptake by plants. We analyzed dioxins in soil and corn tissue samples from field plots after 30 continuous applications of biosolids at 0 (Control), 16.8, and 67.2 Mg biosolids ha(-1) yr(-1) resulting in 0, 504, and 2016 Mg ha(-1) cumulative loadings of biosolids, respectively. The levels of dioxins in soil were only 79.9, 115.5, and 247.5 ng toxic equivalents (TEQs) kg(-1) in the 0, 504, and 2016 Mg biosolids ha(-1) plots, respectively. Dioxins were not detected in the corn grain, and only trace levels (6.8-7.5 ng TEQs kg(-1)) were found in the corn stover; however, these values were not statistically different between control and biosolids-amended soils. These observations suggest that although long-term application of biosolids may increase the levels of dioxins in soil, it does not affect dioxins uptake by corn.     

A PRACTICAL MODEL INTEGRATING QUALITY ASSURANCE INTO ENVIRONMENTAL MONITORING1

ABSTRACT: A model of comprehensive environmental monitoring process with integral quality assurance is presented. This model views the monitoring process as iterative cycles of a series of elements: design, plan, protocols, preparation, field liaison, sample collection, sample handling, laboratory analysis, data transmission, data validation, data approval, data provision, statistical analysis, and reporting. Quality assurance is linked to each element, not just to laboratory analysis. The program of quality assurance ensures that environmental monitoring data are compatible with the project goals, are comparable between various sampling agencies, and maintain a high degree of scientific credibility. The key characteristics of the overall quality assurance process are detailed documentation, timely resolution of problems, regular reporting, and routine independent audits.