Change of air quality and its impact on atmospheric visibility in central-western Pearl River Delta

Ambient air quality data, including atmospheric visibility, of Foshan city, a highly polluted city in the Pearl River Delta (PRD), and data obtained by the On-line Air Pollutant Exhaust Monitoring Network (OAPEMN), recently established by the National Emission Monitoring and Control Network for major industrial enterprises, were analyzed and are reported here for the first time, revealing the change in air pollution patterns and its impact on visibility degradation in the last decade. Reduced visibility of less than 8 km (after elimination of rainy and foggy periods) was found 22% of the time from 1998 to 2008, accompanied by elevated levels of pollutants, especially SO₂ and PM₁₀, in comparison with that of other developed cities. However, PM₁₀ showed a steady decreasing trend (0.004 mg m^???3 year^???1) during 2001?C2008, in contrast to the noticeable increase in ambient NO₂ concentrations from ~0.020 mg m^???3 before 2005 to above 0.050 mg m^???3 afterward. Multiple regression analysis revealed that the percentage of reduced visibility strongly correlated with PM₁₀ concentration, suggesting that visibility degradation was directly proportional to the loading of particles. Moreover, the fairly significant correlation between reduced visibility and NO₂ concentration also implied that the impact of primary emissions of NO₂ and enhanced secondary pollutants, formed via photochemical processes in the atmosphere, could not be ignored. The decreased PM₁₀ levels were obviously the predominant factor for the improvement in visibility (5.0% per 0.01 mg m^???3) and were likely due to the implementation of stricter air pollution control measures for industrial exhaust, which also resulted in reduced SO₂ pollution levels in the recent 2 years. In particular, the OAPEMN records showed an overall enhanced SO₂ removal by 64% in major industrial sectors. The continuous increase in road traffic and lack of efficient NO _x control strategies in the PRD region, however, caused an increase in ambient NO₂ concentrations.     

Optimal methods to determine the physical parameters for activated carbon adsorption

The objectives of this research were to examine the physical characteristics of activated carbons made of different materials, thereby suggest a preferable approach to obtaining the optimal estimation of the parameters for the activated carbons by the statistical techniques. After the appropriate pretreatments, the apparent and true densities of activated carbon, adsorption isotherms of argon, nitrogen and mercury, and the adsorptive capacity of benzene were determined by using the recommended approaches. The results showed that the shapes of hysteresis loop indicated that the pores were probably slit‐shaped or formed by plate‐like particles, which could be confirmed by the SEM examination. It was noted that the apparent density used for pore volume calculation presented a higher possibility of underestimation. Through the use of the statistical techniques, such as factor analysis (FA) and correspondence analysis (CA), the principal physical parameters on adsorption phenomena could be characterized. Finally, the optimal methods for obtaining the surface area and pore volume of activated carbons were suggested.     

Serum concentrations and profiles of polychlorinated biphenyls in Taiwan Yu-cheng victims twenty years after the incident

In 1979, about 2000 people in central Taiwan were intoxicated via rice oil consumption that was contaminated with polychlorinated biphenyls (PCBs). This "Yu-cheng" incident was one of the two known major human PCB intoxication episodes. Twenty years after the intoxication, serum samples of 435 Yu-cheng victims, 414 adults and 21 children, were collected. Sixteen PCB congeners were analyzed with a gas chromatograph-electron capture detector. We found the median concentration of total PCBs in the adult serum was 1500 ng/g lipid, still substantially higher than that of the general population in Taiwan (3.7-fold) and most seafood consumers in the world. Most of analyzed PCB congeners in children were below or around the detection limits. Congener #138, however, had the highest concentrations, approximately accounting for 55% and 29% in the child and adult groups, respectively. Given that PCBs are persistent organic pollutants and endocrine disruptors, the concentrations and congener-specific profiles regarding the Yu-cheng victims provide valuable information for the investigation of such chemicals in humans.     

凝聚法处理水中腐植质的初步研究

通过凝聚试验确定ＡＩ盐，Ｆｅ盐处理腐植持的最佳ｐＨ值，最佳投加量，并从机理入手探讨产生影响的原因，为改进对策提供理论依据。     

In vitro genotoxicity of exhaust emissions of diesel and gasoline engine vehicles operated on a unified driving cycle

Acetone extracts of engine exhaust particulate matter (PM) and of vapor-phase semi-volatile organic compounds (SVOCs) collected from a set of 1998-2000 model year normal emitter diesel engine automobile or light trucks and from a set of 1982-1996 normal emitter gasoline engine automobiles or light trucks operated on the California Unified Driving Cycle at 22 [degree]C were assayed for in vitro genotoxic activities. Gasoline and diesel PM were comparably positive mutagens for Salmonella typhimurium strains YG1024 and YG1029 on a mass of PM extract basis with diesel higher on a mileage basis; gasoline SVOC was more active than diesel on an extracted-mass basis, with diesel SVOC more active on a mileage basis. For chromosomal damage indicated by micronucleus induction in Chinese hamster lung fibroblasts (V79 cells), diesel PM expressed about one-tenth that of gasoline PM on a mass of extract basis, but was comparably active on a mileage basis; diesel SVOC was inactive. For DNA damage in V79 cells indicated by the single cell gel electrophoresis (SCGE) assay, gasoline PM was positive while diesel PM was active at the higher doses; gasoline SVOC was active with toxicity preventing measurement at high doses, while diesel SVOC was inactive at all but the highest dose.     

Characteristics of sorption losses of polychlorinated biphenyl congeners onto glass surfaces

Sorption losses to glass surfaces of five polychlorinated biphenyl (PCB) congeners in aqueous solutions were investigated. Adsorption/desorption experiments were conducted under conditions that simulated actual sample handling procedures for environmental samples. It was found that the adsorption loss is related to the degree of chlorination. PCB congener 180 lost the most onto glass surfaces, followed by congeners 138, 101/28, and 52, in decreasing order. More PCB adsorption occurred onto glass under conditions of agitation and higher temperature (22°C) during the five-day experimental period. The salinity effect (“salting out effect”) was also observed in this work. The efficiency of desorption (rinsing three times with solvent) was found to be ineffective in extracting adsorbed PCBs. It was necessary to use mechanical shaking for extraction. Storage of samples up to five days resulted in sorption losses as much as 30%, 17%, 30%, 40%, and 55% of PCB 28, 52, 101, 138, and 180, respectively. Sorption losses need to be considered when conducting water sampling or toxicological studies to avoid underestimation of the actual PCB concentrations and their toxic effects.     

Satisfying shoppers’ psychological needs: From public market to cyber-mall

In many cities in North America and Europe, shopping centres are replacing the traditional high street shops. At the same time, electronic shopping is growing rapidly. In this paper, the results of a literature review of environment–behaviour research on shopping and shopping environments (e.g., farmer's markets, shopping centres, and electronic shopping) are presented. The focus of analysis is on how the physical features (e.g., layout and background music) influence shoppers’ experiences, and on how well these environments satisfy the psychological needs of their shoppers (e.g., social interaction, sensory stimulation, and security and comfort). Any implications for environmental design, and the future of shopping environments are discussed. A conceptual framework and suggestions for future research are proposed.     

Assessment of metals in dry-toilet collected matters from suburban areas of Ulaanbaatar,Mongolia, using biosolids quality guidelines and potential ecological risk index

Dry-toilet collected matter （DCM） from traditional dry-toilet pits are a potential health and ecological risk in suburban areas. In this study, the characteristics of metals in DCMs from suburban areas of Ulaanbaatar were surveyed. The results indicate that DCMs contain a high percentage of organic matter and nutrients, while heavy metals are at low levels, which shows good agricultural potential. The concentration ranges of Cr, Cu, Hg, Ni, Pb, and Zn were 11±5, 46±9, 0.08±0.05, 9±3, 17±9, and 338±86mg·kg^-1, respectively. The concentration of Cd was below 0.5 mg.kgl, and a high positive relation was shown between chromium and nickel concentrations. The heavy metals in DCMs were safe for land application but Zn in DCMs was close to the effects range median （ERM）, which is toxic in some cases, such as amphipod bioassays. Because it is mandatory to treat DCMs to reduce pathogens, in the case of heavy metal enrichment and agricultural reuse, composting or pyrolysis are better choices than incinera- tion. Compared with global soil background values, the heavy metals in DCMs showed a low level of ecological risk, but a medium level when compared with Mongolian soil background values. The ecological risk of six heavy metals was in the descending order Hg 〉 Cu 〉 Zn 〉 Pb 〉 Ni 〉 Cr and the contribution rate of Hg exceeded 60%.     

Optimization for solidification of low-level-radioactive resin using Taguchi analysis

Solidification of low-level-radioactive (LLW) resin was optimized using Taguchi analytical methodology. The ingredients in LLW mortar which caused the solidification of cement were evaluated through consecutive measurements of the effects of various concentrations of ingredients. Samples selected according to Taguchi's method were separated into 18 different categories and measured at the 7th, 21st, and 28th day after fabrication on developing effects. Evaluations of the various samples focused on whether the compressive and bending strength fulfilled the special criteria of the Taiwan Power Company (TPC). Similar results indicated that both furnace slag and fly ash were the dominant material resulting from the solidification of LLW mortar. The superior combination was obtained as furnace slag 24 wt.%, fly ash 24 wt.%, and cement 8 wt.% to mix 24 wt.% of resin with 20 wt.% of water, to fulfill the contemporary requirements of TPC.     

掺硼金刚石三电极系统处理垃圾渗滤液实验研究

实验以掺硼金刚石电极为阳极构建三电极系统处理稳定的垃圾渗滤液。考察了稀释比、初始pH值、电流密度和极板间距4个因素对垃圾渗滤液污染物去除率的影响。实验结果表明,电流密度、稀释比是影响电化学氧化垃圾渗滤液的主要因素,极板间距、初始pH值对电化学氧化垃圾渗滤液的影响较小。在稀释比为1∶2、电流密度为75 mA/cm2、pH值未调节、极板间距为10 mm最优工况时,经过5 h电化学氧化后NH+4-N、COD均能完全去除;NH+4-N、COD去除率分别满足线性方程y=21.759t、y=20.717t,对应的线性相关系数为0.9923和0.9925。最优工况条件下,BDD电极电化学氧化垃圾渗滤液的能耗为260 kWh/m3。