Benefits of sustainable waste management in the vegetable greenhouse industry

This study investigated the benefits of an on-site sustainable solid waste treatment and utilization system for the greenhouse industry. The composts made from greenhouse wastes were tested and found to contain high nutrient values and good physical properties, and could be used as high quality growing media. The finished composts were tested in a greenhouse against the conventional growth media (sawdust) and resulted in a 10% yield increase by using the compost. An economic analysis was conducted to show the economic benefits of on-site composting for a greenhouse operation. Based on a four-hectare tomato or pepper greenhouse, and amortizing the capital equipment over five years, the net annual cost of composting represents a savings of dollars 8,000 annually.     

Source characterization of ozone precursors by complementary approaches of vehicular indicator and principal component analysis

Measurements of speciated non-methane hydrocarbons (NMHCs) were conducted in an ozone non-attainment metropolis with pronounced industrial emissions in addition to traffic ones. Highly variable and complex natures of industrial sources make their composition profiles difficult to determine. In the circumstances of no reliable source profiles, two simple complementary approaches were attempted to characterize sources of NMHCs. First, a robust vehicular indicator, 3-methylpentane (3MC5A), which is an intrinsic component of gasoline, was used to estimate contributions of traffic versus non-traffic sources for major NMHCs with high ozone-forming potentials (OFPs), such as ethene, toluene, xylene, isoprene, etc. Second, the method of principal component analysis (PCA) was employed to further discern non-traffic emissions into various source groups. A total of 454 ambient samples were sampled in the urban-industrial complex metropolis (Kaohsiung, Taiwan) to build up a large dataset to be tested by the two complementary approaches. It was found that four types of emissions, i.e., traffic, household fuel leakage, industrial, and biogenic, were responsible for the observed ambient NMHCs. The industrial contribution was significant for ethene and toluene (with 48–67% and 33–62%, respectively), whereas xylene was found to be mainly vehicular. In addition, isoprene revealed its biogenic nature. OFPs arising from vehicular, industrial and biogenic contributions could be further assessed for the purpose of emission control of NMHCs in the ozone non-attainment area.     

Design and validation of a passive deposition sampler

A new, passive particle deposition air sampler, called the Einstein-Lioy Deposition Sampler (ELDS), has been developed to fill a gap in passive sampling for near-field particle emissions. The sampler can be configured in several ways: with a protective hood for outdoor sampling, without a protective hood, and as a dust plate. In addition, there is an XRF-ready option that allows for direct sampling onto a filter-mounted XRF cartridge which can be used in conjunction with all configurations. A wind tunnel was designed and constructed to test the performance of different sampler configurations using a test dust with a known particle size distribution. The sampler configurations were also tested versus each other to evaluate whether or not the protective hood would affect the collected particle size distribution. A field study was conducted to test the sampler under actual environmental conditions and to evaluate its ability to collect samples for chemical analysis. Individual experiments for each configuration demonstrated precision of the sampler. The field experiment demonstrated the ability of the sampler to both collect mass and allow for the measurement of an environmental contaminant i.e. Cr(6+). The ELDS was demonstrated to be statistically not different for Hooded and Non-Hooded models, compared to each other and the test dust; thus, it can be used indoors and outdoors in a variety of configurations to suit the user's needs.