Hierarchical priority setting for restoration in a watershed in NE Spain, based on assessments of soil erosion and ecosystem services

Maintaining and enhancing ecosystem services through the restoration of degraded ecosystems have become an important biodiversity conservation strategy. Deciding where to restore ecosystems for the attainment of multiple services is a key issue for future planning, management, and human well-being. Most restoration projects usually entail a small number of actions in a local area and do not consider the potential benefits of planning restoration at broad regional scales. We developed a hierarchical priority setting approach to evaluate the performance of restoration measures in a semiarid basin in NE Spain (the Martín River Basin, 2,112 km²). Our analysis utilized a combination of erosion (a key driver of degradation in this Mediterranean region) and six spatially explicit ecosystem services data layers (five of these maps plotted surrogates for soil retention and accumulation, water supply and regulation, and carbon storage, and one plotted a cultural service, ecotourism). Hierarchical maps were generated using a geographic information system that combined areas important for providing a bundle of ecosystem services, as state variables, with erosion maps, as the disturbance or regulatory variable. This was performed for multiple scales, thereby identifying the most adequate scale of analysis and establishing a spatial hierarchy of restoration actions based on the combination of the evaluation of erosion rates and the provision of ecosystem services. Our approach provides managers with a straightforward method for determining the spatial distribution of values for a set of ecosystem services in relation to ecological degradation thresholds and for allocating efforts and resources for restoration projects in complex landscapes.     

Effect of chromium on the fatty acid composition of two strains of Euglena gracilis

The effect of hexavalent chromium on fatty acid composition was studied in two strains of Euglena gracilis; UTEX 753 (from the Culture Collection of Algae of Texas University, USA) and MAT (isolated from a highly polluted River). Both were grown in photoauxotrophic and photoheterotrophic conditions and exposed to two metal concentrations, one below and one above IC50. The high malondialdehyde (MDA) levels (3 to 7-fold) obtained with chromium concentration above IC50, suggested the existence of metal-induced lipid peroxidation. Total lipid content increased only with concentration below IC50, whereas it was inhibited by higher metal concentration. Photoheterotrophic control strains exhibited a significantly higher proportion of saturated and polyunsaturated fatty acids. Polyunsaturated acids were most affected by chromium, especially those related to chloroplast structures. Ultra-structure studies showed clear thylakoid disorganization in all treated cells. The results indicate that hexavalent chromium affects levels of fatty acids, especially those related to photosynthetic activity.     

Effects of heavy metals and nitroaromatic compounds on horseradish glutathione S-transferase and peroxidase

Glutathione S-transferase (GST) and peroxidase (POX) activities have a direct relation to the effect of stress on plant metabolism. Changes in the activities of the enzymes were therefore studied. Horseradish hairy roots were treated by selected bivalent ions of heavy metals (HMs) and nitroaromatic compounds (NACs). We have shown differences in GST activity when assayed with substrates 1-chloro-2,4-dinitrobenzene (CDNB) and 1,2-dichloro-4-nitrobenzene (DCNB). The conjugation of DCNB catalysed by GST was inhibited in all roots treated with HMs as compared to non-treated roots, whereas NACs caused induction of the activity in dependence on the exposition time and concentration of compounds. The conjugation of CDNB by GST was not affected to the same extent. The increase of GST activity was determined in cultures treated by nickel (0.1 mM) and diaminonitrotoluenes (DANTs, 0.1 mM) for 6 h, whereas the roots treated by 2,4,6-trinitrotoluene (TNT), 4-amino-2,6-dinitrotoluene (ADNT) and dinitrotoluene (DNT, 1.0 mM) needed 27 h treatment to induce the activity. The POX activity of cultures treated by HMs was inhibited to 17-35% in comparison to non-treated cultures. The POX activity of roots treated by TNT (0.1 and 1.0 mM) for 6 and 27 h and by ADNT (0.1 and 1.0 mM) for 6 h was inhibited. A partial increase of POX activity was measured in roots treated by all NACs for 27 h. The content of oxidized glutathione (GSSG) and reduced glutathione (GSH) in the roots differed significantly. It was followed as a symptom of the stress reaction of the plant metabolism to the effect of NACs and HMs.     

Trace element concentrations in soils along urbanization gradients in the city of Wien, Austria

Urban soil is an important component of urban ecosystems. This study focuses on heavy metal contamination in soils of Wien (Austria) and results are compared to those for a few large European cities. We analysed the elemental contents of 96 samples of topsoil from urban, suburban and rural areas in Wien along a dynamic (floodplain forest) and a stable (oak–hornbeam forest) urbanization gradient. The following elements were quantified using ICP-OES technique: Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Pb, P, S and Zn. For heavy metals PI (pollution index) values were used to assess the level of pollution. The PI values indicated high level of pollution by Pb in the suburban and rural area of stable gradient and in the urban area of dynamic gradient; moderate level of pollution was indicated for Cd in the urban area of stable gradient. The level of pollution was moderate for Co in the suburban and rural area of the stable gradient, and for Cu in suburban area of stable gradient, and urban area of dynamic gradient. The pollution level of Zn was moderate in all areas. Urban soils, especially in urban parks and green areas may have a direct influence on human health. Thus, the elemental analysis of soil samples is one of the best ways to study the effects of urbanization. Our results indicated that the heavy metal contamination was higher in Wien than in a few large European cities.     

Dissolved organic matter fractions formed during composting of winery and distillery residues: evaluation of the process by fluorescence excitation-emission matrix

The aim of the present paper is to assess the maturity degree reached by different samples of several mixtures from winery and distillery residues composted using the Rutgers composting system, by means of excitation-emission matrix (EEM) fluorescence spectroscopy. The composts were sampled once a week for about 200d. EEM spectra indicate the presence of different fluorophores. The fluorescence intensities of these peaks show trends related to the maturity of the composting samples selected. The "contour density" of EEM maps is strongly modified through time. We have used the quantitative method of fluorescence regional integration (FRI). The EEMs were delineated into five excitation-emission regions. The degree of compost maturity could be correlated with the percentage of the volumetric integration under the EEM within each region. Further refinement of these techniques should provide a relatively rapid method for assessing the suitability of the compost to soil application.     

Evaluation of boron removal from water by hydrotalcite-like compounds

Layered double hydroxides (LDHs) or hydrotalcite (HT)-like compounds with different kinds of metal ions (Mg-Al and Mg-Fe) in the brucite-like sheets were prepared and their adsorption properties were studied in the boron removal from aqueous solution under laboratory conditions. The hydrotalcites were synthesized by the coprecipitation method and were characterized by chemical analyses, X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and specific surface area measurements (BET). The affinity of these materials with a mixture of B(OH)(3) and B(OH)(4)(-) was studied as a function of contact time, initial pH of the solutions, HT quantity and B concentration (adsorption isotherms). It was found that 120 min is enough time for the equilibrium state to be reached in boron adsorption. Boron removal was independent of the initial pH of the solutions because of the high buffering capacity of the LDHs. On the other hand, the adsorption capacity increases with increasing the adsorbent quantity. The adsorption isotherms, described by the Langmuir model, are of L-type, suggesting that B(OH)(4)(-) is adsorbed preferentially on HT-like materials. Besides, Mg-Al hydrotalcites showed higher adsorption capacity than Mg-Fe. We proposed that in Mg-Al hydrotalcites, the boron removal occurs by both adsorption on external surface and ion exchange, whereas for Mg-Fe it occurs only by surface adsorption. After treatment of a solution containing 5.2 mgBl(-1) with Mg-Al hydrotalcites the final boron concentration reached the recommended limit by WHO for drinking water (0.5 mgl(-1)).     

Biofilm responses to marine fish farm wastes

The changes in the biofilm community due to organic matter enrichment, eutrophication and metal contamination derived from fish farming were studied. The biofilm biomass, polysaccharide content, trophic niche and element accumulation were quantified along an environmental gradient of fish farm wastes in two seasons. Biofilm structure and trophic diversity was influenced by seasonality as well as by the fish farm waste load. Fish farming enhanced the accumulation of organic carbon, nutrients, selenium and metals by the biofilm community. The accumulation pattern of these elements was similar regardless of the structure and trophic niche of the community. This suggests that the biofilm communities can be considered a reliable tool for assessing dissolved aquaculture wastes. Due to the ubiquity of biofilms and its wide range of consumers, its role as a sink of dissolved wastes may have important implications for the transfer of aquaculture wastes to higher trophic levels in coastal systems.     

Assessing farming eco-efficiency: a Data Envelopment Analysis approach

This paper assesses farming eco-efficiency using Data Envelopment Analysis (DEA) techniques. Eco-efficiency scores at both farm and environmental pressure-specific levels are computed for a sample of Spanish farmers operating in the rain-fed agricultural system of Campos County. The determinants of eco-efficiency are then studied using truncated regression and bootstrapping techniques. We contribute to previous literature in this field of research by including information on slacks in the assessment of the potential environmental pressure reductions in a DEA framework. Our results reveal that farmers are quite eco-inefficient, with very few differences emerging among specific environmental pressures. Moreover, eco-inefficiency is closely related to technical inefficiencies in the management of inputs. Regarding the determinants of eco-efficiency, farmers benefiting from agri-environmental programs as well as those with university education are found to be more eco-efficient. Concerning the policy implications of these results, public expenditure in agricultural extension and farmer training could be of some help to promote integration between farming and the environment. Furthermore, Common Agricultural Policy agri-environmental programs are an effective policy to improve eco-efficiency, although some doubts arise regarding their cost-benefit balance.     

Carbon footprint in corporate logistics operations in the food sector

Global warming is negatively affecting the environment of the planet. This situation has led to the development of international standards, such as the International Organisation for Standardization's DIS 14064‐1 and the Greenhouse Gas Protocol Corporate Standard, both of which measure corporate carbon footprints. These standards provide guidelines that can be applied to different organizational sectors. However, these are not sufficient for controlling the reduction of carbon emissions, because although they propose the use of indicators, they do not explicitly define them. In addition, in the case of emissions from wastewater treatment, they only suggest that the emissions associated with this process be considered. In the present study, an eight‐step, unified methodology based on these two international standards is proposed, focusing on direct emissions. Moreover, the step‐by‐step to data collection, calculations, and the required indicators to control the emissions are defined. The first scope considers direct emissions from sources that are owned or controlled by the company. Methane generation measurement from wastewater treatment has been included in the methodology within Scope 1, as it is the second most polluting gas after carbon dioxide, both of which give rise to global warming. The proposed methodology was tested as a case study in one of the most important companies in the food sector in Colombia.     

沙尘天气过程对北京空气质量的影响

利用气象、沙尘暴特种观测以及环境监测等多种资料,对2010年3月19─22日沙尘天气过程的大气结构、沙尘源地和垂直水平输送条件以及北京近地层气象要素、空气质量的变化特征进行了分析. 结果表明:这次强沙尘暴天气过程是由冷空气短波槽快速东移南下、地面冷锋明显发展东移造成的;前期沙尘源地土壤湿度的减小为起沙提供了有利条件,同时低层存在的较强西北气流将从源地卷起的沙尘输送到下游地区;沙尘发生时,20 m气层内风速迅速增大,气层内垂直方向风速梯度也逐渐增大,相对湿度急剧降至20%～30%之间;受这次沙尘天气影响,北京地区ρ(TSP)以及10个区县的ρ(PM10)均迅速增加,空气质量达到重污染.