A safety culture maturity model for petrochemical companies in Brazil

A framework to measure safety culture maturity in the Brazilian oil and gas companies was formulated based on the model of Hudson (2001). Following a review of the safety culture literature, a questionnaire was designed to measure five aspects of organisational safety indicative of five levels of cultural maturity. The questionnaire was completed by the safety managers of 23 petrochemical companies based in Camacari, Bahia, Brazil and they were interviewed one month later. The reliability of the questionnaire was tested by asking the same questions in an interview and comparing the results (alternate forms reliability). The correlation coefficients between the questionnaire and interview scores on each dimension ranged from r = 0.7 to 0.9, demonstrating good reliability of the measures used. The research findings demonstrated that the 23 companies studied showed characteristics of different levels of safety culture maturity. Most scores were at the level of proactive. The model of Hudson (2001) and the revised framework and questionnaire were found to be practical to use, making it possible to identify levels of safety culture maturity in the context of the Brazilian petrochemical industry.     

Temperature Measurement and Stratification in Facultative Waste Stabilisation Ponds in the UK Climate

Temperature measurements were taken at three pilot-scale facultative ponds located at Esholt wastewater treatment works in West Yorkshire, UK over two one-year periods. The measurements were taken at different depths using a technology called Thermochron iButton. The iButton readings were compared with temperature measurements taken by a YSI sonde probe and maximum/minimum thermometers: they were found to be within 1 .C. In the temperature range 3.18 .C the mean weekly and monthly air temperatures were found to be good predictors for the mean weekly and monthly pond water-column temperatures. The level of stratification in the ponds under UK climatic conditions was assessed; the data revealed that the ponds remained thermally stratified for significant periods during the year despite their shallow depth.     

Anaerobic treatment of sludge from a nitrification-denitrification landfill leachate plant

The viability of anaerobic digestion of sludge from a MSW landfill leachate treatment plant, with COD values ranging between 15,000 and 19,400mg O(2)dm(-3), in an upflow anaerobic sludge blanket reactor was studied. The reactor employed had a useful capacity of 9l, operating at mesophilic temperature. Start-up of the reactor was carried out in different steps, beginning with diluted sludge and progressively increasing the amount of sludge fed into the reactor. The study was carried out over a period of 7 months. Different amounts of methanol were added to the feed, ranging between 6.75 and 1cm(3)dm(-3) of feed in order to favour the growth of methanogenic flora. The achieved biodegradation of the sludge using an upflow anaerobic sludge blanket Reactor was very high for an HRT of 9 days, obtaining decreases in COD of 84-87% by the end of the process. Purging of the digested sludge represented approximately 16% of the volume of the treated sludge.     

Biomonitoring the genotoxic effects of pollutants on <Emphasis Type="Italic">Tradescantia pallida</Emphasis> (Rose) D.R. Hunt in Dourados,Brazil

Purpose  

This study aimed to associate the intensity of vehicular traffic in the city of Dourados (Mato Grosso do Sul State, Brazil) with mutagenic effects and alterations in leaf physiology as measured by the quantity of micronuclei and the leaf surface parameters of Tradescantia pallida.     

The adsorption and degradation of chlorpyriphos-methyl, pendimethalin and metalaxyl in solid urban waste compost

To evaluate the feasibility of using compost to prepare substrates for the disposal of pesticide residues, adsorption and degradation studies were carried out on three widely used agricultural pesticides: chlorpyriphos-methyl, pendimethalin and metalaxyl. Obtained from solid urban waste, this compost has been shown to be able to adsorb high levels of chlorpyriphos-methyl and pendimethalin (85%, 100%) whereas metalaxyl was only adsorbed at a level of 37%. However, adding smectite to the compost increased the adsorption of metalaxyl by 117%. Chlorpyriphos-methyl and pendimethalin degraded quickly with half-lives of 1.7 and 14.5 days, respectively, whereas metalaxyl proved more persistent (a half-life of 84 days). Adding ammonium nitrate to the compost accelerated metalaxyl degradation to a half-life of 15 days.     

Aqueous solubility, effects of salts on aqueous solubility, and partitioning behavior of hexafluorobenzene: experimental results and COSMO-RS predictions

The aqueous solubility of hexafluorobenzene has been determined, at 298.15 K, using a shake-flask method with a spectrophotometric quantification technique. Furthermore, the solubility of hexafluorobenzene in saline aqueous solutions, at distinct salt concentrations, has been measured. Both salting-in and salting-out effects were observed and found to be dependent on the nature of the cationic/anionic composition of the salt. COSMO-RS, the Conductor-like Screening Model for Real Solvents, has been used to predict the corresponding aqueous solubilities at conditions similar to those used experimentally. The prediction results showed that the COSMO-RS approach is suitable for the prediction of salting-in/-out effects. The salting-in/-out phenomena have been rationalized with the support of COSMO-RS σ-profiles. The prediction potential of COSMO-RS regarding aqueous solubilities and octanol-water partition coefficients has been compared with typically used QSPR-based methods. Up to now, the absence of accurate solubility data for hexafluorobenzene hampered the calculation of the respective partition coefficients. Combining available accurate vapor pressure data with the experimentally determined water solubility, a novel air-water partition coefficient has been derived.     

Behavior of fenhexamid in soil and water

A study was conducted to investigate fenhexamid (FEX) behavior in soil and in water. FEX proved to be rather stable at acid pH but showed slight degradation at neutral and alkaline pH. After 101 days of FEX spiking of a soil sample, 94% at pH 4, 12% at pH 7 and 23% at pH 9 of the active ingredient was still present. In natural water the rate of FEX disappearance appeared to be slow which may be due to abiotic rather than biotic processes. The soil degradation tests showed low persistence of the active ingredient if a good microflora activity is guaranteed (DT(50) about 1 day). Moreover, in absence of microorganisms, FEX proved to be stable. Humidities of 25 and 50% of Water Holding Capacity (WHC) influenced in equal measure the rate of degradation. From the same soil, a bacterium was isolated and identified as Bacillus megaterium, which was able to metabolize FEX with the hydroxylation of the cyclohexane ring. Moreover, FEX showed an elevated affinity for humic acid (73%), smectite (31%), and ferrihydrite(20%) and low affinity for vermiculite (11%) and kaolinite (7%).     

Empirical evaluation of spatial and non-spatial European-scale multimedia fate models: results and implications for chemical risk assessment

Multimedia environmental fate models are commonly-applied tools for assessing the fate and distribution of contaminants in the environment. Owing to the large number of chemicals in use and the paucity of monitoring data, such models are often adopted as part of decision-support systems for chemical risk assessment. The purpose of this study was to evaluate the performance of three multimedia environmental fate models (spatially- and non-spatially-explicit) at a European scale. The assessment was conducted for four polycyclic aromatic hydrocarbons (PAHs) and hexachlorobenzene (HCB) and compared predicted and median observed concentrations using monitoring data collected for air, water, sediments and soils. Model performance in the air compartment was reasonable for all models included in the evaluation exercise as predicted concentrations were typically within a factor of 3 of the median observed concentrations. Furthermore, there was good correspondence between predictions and observations in regions that had elevated median observed concentrations for both spatially-explicit models. On the other hand, all three models consistently underestimated median observed concentrations in sediment and soil by 1-3 orders of magnitude. Although regions with elevated median observed concentrations in these environmental media were broadly identified by the spatially-explicit models, the magnitude of the discrepancy between predicted and median observed concentrations is of concern in the context of chemical risk assessment. These results were discussed in terms of factors influencing model performance such as the steady-state assumption, inaccuracies in emission estimates and the representativeness of monitoring data.     

Emission Factors for High-Emitting Vehicles Based on On-Road Measurements of Individual Vehicle Exhaust with a Mobile Measurement Platform

ABSTRACT

Fuel-based emission factors for 143 light-duty gasoline vehicles (LDGVs) and 93 heavy-duty diesel trucks (HDDTs) were measured in Wilmington, CA using a zero-emission mobile measurement platform (MMP). The frequency distributions of emission factors of carbon monoxide (CO), nitrogen oxides (NO_x), and particle mass with aerodynamic diameter below 2.5 μm (PM_2.5) varied widely, whereas the average of the individual vehicle emission factors were comparable to those reported in previous tunnel and remote sensing studies as well as the predictions by Emission Factors (EMFAC) 2007 mobile source emission model for Los Angeles County. Variation in emissions due to different driving modes (idle, low- and high-speed acceleration, low- and high-speed cruise) was found to be relatively small in comparison to intervehicle variability and did not appear to interfere with the identification of high emitters, defined as the vehicles whose emissions were more than 5 times the fleet-average values. Using this definition, approximately 5% of the LDGVs and HDDTs measured were high emitters. Among the 143 LDGVs, the average emission factors of NO_x, black carbon (BC), PM_2.5, and ultrafine particle (UFP) would be reduced by 34%, 39%, 44%, and 31%, respectively, by removing the highest 5% of emitting vehicles, whereas CO emission factor would be reduced by 50%. The emission distributions of the 93 HDDTs measured were even more skewed: approximately half of the NO_x and CO fleet-average emission factors and more than 60% of PM_2.5, UFP, and BC fleet-average emission factors would be reduced by eliminating the highest-emitting 5% HDDTs. Furthermore, high emissions of BC, PM_2.5, and NO_x tended to cluster among the same vehicles.

IMPLICATIONS This study presents the characterization of on-road vehicle emissions in Wilmington, CA, by sampling individual vehicle plumes. Approximately 5% of the vehicles were high emitters, whose emissions were more than 5 times the fleet-average values. These high emitters were responsible for 30% and more than 50% of the average emission factors of LDGVs and HDDVs, respectively. It is likely that as the overall fleet becomes cleaner due to more stringent regulations, a small fraction of the fleet may contribute a growing and disproportionate share of the overall emissions. Therefore, long-term changes in on-road emissions need to be monitored.     

Influence of the operation conditions on CO2 capture by CaO-derived sorbents prepared from synthetic CaCO3

In this work, a statistical experimental design is performed in order to prepare CaCO₃ materials for use as CaO-based CO₂ sorbent precursors. The influence of different operational parameters such as synthesis temperature (ST), stirring rate (SR) and surfactant percent (SP) on CO₂ capture is studied by applying Response Surface Methodology (RSM). The samples were characterized using different analytical techniques including X-ray diffraction, N₂ adsorption isotherm analysis and Scanning Electron Microscopy–X-ray Energy Dispersive Spectroscopy (SEM-EDX). CO₂ capture capacity was determined by means of a thermogravimetric analyzer which recorded the mass uptake of the samples when these were exposed to a gas stream containing diluted (15%) CO₂. The statistical approach used in this work provides a rapid way of predicting and optimizing the main preparation variables of CaO-derived sorbents for CO₂ sorption. The results obtained clearly indicate that four parameters statistically influence CO₂ uptake: SR, the square of SR, its interaction with SP and the square of SP.