Clay-sewage sludge co-pyrolysis. A TG-MS and Py-GC study on potential advantages afforded by the presence of clay in the pyrolysis of wastewater sewage sludge

Wastewater sewage sludge was co-pyrolyzed with a well characterized clay sample, in order to evaluate possible advantages in the thermal disposal process of solid waste. Characterization of the co-pyrolysis process was carried out both by thermogravimetric-mass spectrometric (TG-MS) analysis, and by reactor tests, using a lab-scale batch reactor equipped with a gas chromatograph for analysis of the evolved gas phase (Py-GC).Due to the presence of clay, two main effects were observed in the instrumental characterization of the process. Firstly, the clay surface catalyzed the pyrolysis reaction of the sludge, and secondly, the release of water from the clay, at temperatures of approx. 450-500 °C, enhanced gasification of part of carbon residue of the organic component of sludge following pyrolysis.Moreover, the solid residue remaining after pyrolysis process, composed of the inorganic component of sludge blended with clay, is characterized by good features for possible disposal by vitrification, yielding a vitreous matrix that immobilizes the hazardous heavy metals present in the sludge.     

Rheological Studies of Microfibrillar Cellulose Water Dispersions

The rheological behaviour of microfibrillar cellulose (MFC) water dispersions has been investigated. For the first time a detailed study of shear dependent viscosity at low and high shear rate is presented. A peculiar time dependent behaviour measured in the area between 0 and 1000 s⁻¹ was identified. The study shows a hysteresis loop in the shear rate–viscosity relationship at low shear rate. Additional time dependent shear rate measurements were performed, and a hypothesis for a mechanism of interaction and formation of a fibrils network was suggested. Higher temperature caused lower viscosity values, and this difference was increased at higher shear rate values. Oscillatory measurements showed how the closeness of the fibrils helps network creations. Data obtained from high shear measurements showed that 1% MFC water dispersions had a dilatant behaviour at ultra high shear rates with values increasing from 120 to 300 Pa s in the area between 180,000 and 330,000 s⁻¹ .     

Biologic impact on the coastal belt of the province of Venice (Italy,Northern Adriatic Sea): preliminary analysis for the characterization of the bathing water profile

Background, aim and scope  

This paper presents a preliminary study of the water profile with reference to microbiological parameters, required by Directive 2006/07/EC (European Community 2006) concerning the management of bathing water quality, in the coastal belt of the Province of Venice (Italy, Northern Adriatic Sea). A historical database has been implemented with monitoring data for the period 2000–2006 (data on rivers, bathing and marine coastal waters and on the characterization of Wastewater Treatment Plant (WWTP) discharges) from the institutional activity of Veneto Regional Environmental Prevention and Protection Agency (ARPAV). An integrated areal analysis for the microbiological investigation of homogeneous stretches along the coast of the Province of Venice was performed for a preliminary characterization of the bathing water profile considering water quality status and existing pressure sources.     

Insecticidal activity and fungitoxicity of plant extracts and components of horseradish (Armoracia rusticana) and garlic (Allium sativum)

To avoid environmental pollution and health problems caused by the use of traditional synthetic pesticides, there is a trend to search for naturally occurring toxicants from plants. Among the compounds discussed for anti-fungal and insecticidal activity, the natural extracts from garlic and horseradish have attracted considerable attention. The objective of this study is to determine the insecticidal and anti-fungal activity of Armoracia rusticana and Allium sativum L. extracts against larvae of Aedes albopictus (Skuse) and some pathogenic fungi. For the insecticidal test, horseradish and garlic extracts were prepared from fresh plants (cultivated in Emilia Romagna region) in a solution of ethanol 80 % and the two different solutions were used at different concentrations (for the determination of the lethal dose) against the fourth instar mosquito's larvae. The fungicidal test was carried out by the agar plates technique using garlic and horseradish extracts in a 10 % ethanol solution against the following organisms: Sclerotium rolfsii Sacc., Trichoderma longibrachiatum, Botrytis cinerea Pers., Fusarium oxysporum Schlecht. and Fusarium culmorum (Wm. G. Sm.) Sacc. The first results demonstrated that the horseradish ethanol extracts present only a fungistatic activity against Sclerotium rolfsii Sacc., Fusarium oxysporum Schlecht. and F. culmorum (Wm.G. Sm) Sacc. while garlic extracts at the same concentration provided a good fungicidal activity above all against Botrytis cinerea Pers. and S. rolfsii. A. rusticana and A. sativum preparations showed also an interesting and significant insecticidal activity against larvae of A. albopictus, even if horseradish presented a higher efficacy (LC?? value of 2.34 g/L), approximately two times higher than garlic one (LC?? value of 4.48 g/L).     

Preliminary evaluation of insecticide resistance in a strain of Musca domestica (Diptera: Muscidae) from an intensive chicken farm of Northern Italy

The house fly, Musca domestica L., a relevant sanitary pest, is mainly controlled by insecticides. However, an inappropriate use of chemicals may induce resistance, treatment efficacy decline and environmental damages. We evaluated toxicity of some organophosphates, pyrethroids, spinosad and neonicotinoids by topical applications on adults of a M. domestica strain (OcRo) collected from an intensive chicken farm in Northern Italy, in comparison to a susceptible strain (s-DBF). The OcRo strain exhibited higher levels of resistance (RR??) to four pesticides in comparison to s-DBF. Spinosad and imidacloprid had very low RR??, thus were still efficient in OcRo control. We also tested resistance to pesticides in OcRo after topical applications of synergistic compounds. Hydrolases were involved in phosphorganic detoxification and cytochrome P450 monoxygenases in that of pyrethroids. These results indicate that OcRo strain is now multiresistant to organophosphates and pyrethroids, and this should be considered for an environmentally safe pest management.     

Pesticide removal from waste spray-tank water by organoclay adsorption after field application to vineyards

Purpose

The main objective of this work was to develop and test a pilot scheme for decontaminating pesticide-containing water derived from pesticide mixtures used to protect vineyards, in which the scheme comprises adsorption by an organoclay and includes a system where an enhanced or rapid microbial degradation of the adsorbed residues can occur.

Methods

In laboratory experiments, the Freundlich adsorption coefficients of formulations of two fungicides, penconazole and cyazofamid, onto the organoclay Cloisite 20 A were measured in order to predict the efficiency of this organoclay in removing these fungicides from the waste spray-tank water. Subsequently, the adsorption tests were repeated in the pilot system in order to test the practical operation of the depuration scheme.

Results

The adsorption tests with the pilot system show 96% removal of both fungicides over a few hours, similar to the efficiency of removal predicted from the laboratory adsorption tests. The formulation type may influence the efficiency of clay recovered after adsorption. Regarding the waste disposal, for instance, the organoclay composted after the treatment, cyazofamid showed significant dissipation after 90?days, whereas the dissipation of penconazole was negligible.

Conclusion

The depuration scheme developed showed to be efficient for decontaminating pesticide-containing water derived from vineyards, but additional treatments for the adsorbed residues still appear to be necessary for persistent pesticides. However, future decontamination research should be attempted for water contaminated with pesticides containing antifoaming agents in their formulations, in which case the present pilot system could not be applied.     

Scenarios of change in the realized climatic niche of mountain carnivores and ungulates

Mountains are among the natural systems most affected by climate change, and mountain mammals are considered particularly imperiled, given their high degree of specialization to narrow tolerance bands of environmental conditions. Climate change mitigation policies, such as the Paris Agreement, are essential to stem climate change impacts on natural systems. But how significant is the Paris Agreement to the survival of mountain mammals? We investigated how alternative emission scenarios may determine change in the realized climatic niche of mountain carnivores and ungulates in 2050. We based our predictions of future change in species niches based on how species have responded to past environmental changes, focusing on the probabilities of niche shrink and niche stability. We found that achieving the Paris Agreement's commitments would substantially reduce climate instability for mountain species. Specifically, limiting global warming to below 1.5°C would reduce the probability of niche shrinkage by 4% compared with a high-emission scenario. Globally, carnivores showed greater niche shrinkage than ungulates, whereas ungulates were more likely to shift their niches (i.e., face a level of climate change that allows adaptation). Twenty-three species threatened by climate change according to the IUCN Red List had greater niche contraction than other species we analyzed (3% higher on average). We therefore argue that climate mitigation policies must be coupled with rapid species-specific conservation intervention and sustainable land-use policies to avoid high risk of loss of already vulnerable species.     

Hidden demographic impacts of fishing and environmental drivers of fecundity in a sea turtle population

Fisheries bycatch is a critical threat to sea turtle populations worldwide, particularly because turtles are vulnerable to multiple gear types. The Canary Current is an intensely fished region, yet there has been no demographic assessment integrating bycatch and population management information of the globally significant Cabo Verde loggerhead turtle (Caretta caretta) population. Using Boa Vista island (Eastern Cabo Verde) subpopulation data from capture–recapture and nest monitoring (2013–2019), we evaluated population viability and estimated regional bycatch rates (2016–2020) in longline, trawl, purse-seine, and artisanal fisheries. We further evaluated current nesting trends in the context of bycatch estimates, existing hatchery conservation measures, and environmental (net primary productivity) variability in turtle foraging grounds. We projected that current bycatch mortality rates would lead to the near extinction of the Boa Vista subpopulation. Bycatch reduction in longline fisheries and all fisheries combined would increase finite population growth rate by 1.76% and 1.95%, respectively. Hatchery conservation increased hatchling production and reduced extinction risk, but alone it could not achieve population growth. Short-term increases in nest counts (2013–2021), putatively driven by temporary increases in net primary productivity, may be masking ongoing long-term population declines. When fecundity was linked to net primary productivity, our hindcast models simultaneously predicted these opposing long-term and short-term trends. Consequently, our results showed conservation management must diversify from land-based management. The masking effect we found has broad-reaching implications for monitoring sea turtle populations worldwide, demonstrating the importance of directly estimating adult survival and that nest counts might inadequately reflect underlying population trends.     

Mechanical,Barrier and Antioxidant Properties of Chitosan Films Incorporating Cinnamaldehyde

Chitosan films (CF) [1 and 2% w/v] alone and with cinnamaldehyde (CNE) [0.25, 0.5 and 1% v/v] were prepared using an emulsion method, and the obtained films were characterized in terms of water vapor permeability (WVP), water solubility and optical, mechanical and antioxidant properties. The incorporation of CNE at 1% (v/v) significantly decreased the water solubility of the film by approximately 4% for the 1 and 2% CF films, whereas the WVP increased (2.5–3.5 times). The incorporation of CNE (0.25 and 0.5%) into 2% CF significantly increased the tensile strength (TS) (62 and 34%, respectively) and the percent elongation (%E) values, 26, 30 and 52% for CF that contained 0.25, 0.5 and 1% CNE, respectively. The largest value of the elasticity modulus (EM) was observed for 2% CF with 0.25% CNE. All films exhibited a yellow appearance (b*), but the CNE content had a marked impact on the coloration of the films. The CNE recoveries of the CF films (1 and 2%) with 1% of CNE were high (43 and 67%). The antioxidant activities indicated that the incorporation of 1% CNE into CF films (1 and 2%) increased the antioxidant activity. The protective effects of the films with and without CNE on erythrocytes were very strong (36–72% hemolysis inhibition). These results suggest there are potential applications for CF-CNE films as active packaging for the preservation of food products.     

Implementation of a software platform to support an eco-design methodology within a manufacturing firm

The paper aims to explore the implementation of an eco-design methodology and the related software platform (G.EN.ESI – Green ENgineering dESIgn) within technical departments of a manufacturing firm. The G.EN.ESI eco-design methodology is based on the life cycle thinking concept and the software platform is conceived as a set of inter-operable software tools able to efficiently exchange data among them and with the traditional design systems (i.e. CAD, PDM and PLM). A multinational company, designing and producing household appliances, adopted the proposed methodology and related software platform for redesigning two cooker hood models with the aim to improve their environmental performances. Design and engineering departments evaluated the methodology and platform impact on the product development process, as well as the platform inter-operability with traditional design tools. The results indicate that methodology and software platform satisfy the requirements of the enterprise in terms of: (i) degree of expertise and training requirement on this subject, (ii) low impact in a consolidated design process and, (ii) good level of inter-operability among heterogeneous tools. However, the testing results highlight the necessity of a further platform optimisations in terms of software integration (single workbench made by integrated software tools with the same graphical user interface).