Estrogenic activity of pharmaceuticals in the aquatic environment

In the last years pharmaceuticals have aroused great interest as environmental pollutants for their toxic effects towards non target organisms. This study wants to draw attention to a further adverse effect of drugs, the endocrine interference. The most representative drugs of the widespread classes in environment were investigated. The YES-test and the E-screen assay were performed to detect the capability of these substances to bind the human estrogenic receptor α (hERα) in comparison with 17β-estradiol. Out of 14 tested pharmaceuticals, 9 were positive to YES-assay and 11 were positive to E-screen assay; in particular, Furosemide and the fibrates (Bezafibrate, Fenofibrate and Gemfibrozil) gave the maximal estrogenic response. Tamoxifen showed its dual activity as agonist and antagonist of hERα.     

Biomagnification of anthropogenic and naturally-produced organobrominated compounds in a marine food web from Sydney Harbour, Australia

Polybrominated diphenyl ethers (PBDEs) and naturally-produced organobrominated compounds, such as methoxylated PBDEs (MeO-PBDEs), have been scarcely studied in the Southern Hemisphere. Yet, sources of the latter group of compounds were found in Southern regions, specifically in Australia. The environmental distribution and biomagnification potential of organobrominated compounds were therefore investigated in a representative aquatic food chain (invertebrates and fish) from the Sydney Harbour, Australia. Mean PBDE concentrations ranged from 6.4 ng/g lipid weight (lw) in squid to 115 ng/g lw in flounder. BDE 47 was the dominant congener, followed by BDE 100. Mean levels of MeO-PBDEs (sum of congeners 2’-MeO-BDE 68 and 6-MeO-BDE 47) were as high as 110 ng/g lw in tailor, with a slight dominance of 2’-MeO-BDE 68. Polybrominated hexahydroxanthene derivates (PBHDs), another class of naturally-produced compounds, were found at variable concentrations and ranged from 4.7 ng/g lw in fanbelly and 146 ng/g lw in tailor. The tribrominated PBHD isomer dominated in the samples, except for luderick and squid. The lower levels of PBDEs found in luderick from the harbour compared to those obtained from the upper Parramatta River indicated a terrestrial (anthropogenic) origin of PBDEs, while the higher levels of MeO-PBDEs and PBHDs in the samples from the harbour confirmed the marine (natural) origin of these compounds. The highest trophic magnification factor (TMF) was found for sum PBDEs (3.9), while TMFs for sum MeO-PBDEs and sum PBHDs were 2.9 and 3.4, respectively. This suggests that biomagnification occurs in the studied aquatic food chain for anthropogenic brominated compounds, but also for the naturally-produced organobromines.     

Adapting a geographical information system-based water resource management to the needs of the Romanian water authorities

Background, aim, and scope

The need for global and integrated approaches to water resources management, both from the quantitative and the qualitative point of view, has long been recognized. Water quality management is a major issue for sustainable development and a mandatory task with respect to the implementation of the European Water Framework Directive as well as the Swiss legislation. However, data modelling to develop relational databases and subsequent geographic information system (GIS)-based water management instruments are a rather recent and not that widespread trend. The publication of overall guidelines for data modelling along with the EU Water Framework Directive is an important milestone in this area. Improving overall water quality requires better and more easily accessible data, but also the possibility to link data to simulation models. Models are to be used to derive indicators that will in turn support decision-making processes. For this whole chain to become effective at a river basin scale, all its components have to become part of the current daily practice of the local water administration. Any system, tool, or instrument that is not designed to meet, first of all, the fundamental needs of its primary end-users has almost no chance to be successful in the longer term.

Materials and methods

Although based on a pre-existing water resources management system developed in Switzerland, the methodological approach applied to develop a GIS-based water quality management system adapted to the Romanian context followed a set of well-defined steps: the first and very important step is the assessment of needs (on the basis of a careful analysis of the various activities and missions of the water administration and other relevant stakeholders in water management related issues). On that basis, a conceptual data model (CDM) can be developed, to be later on turned into a physical database. Finally, the specifically requested additional functionalities (i.e. functionalities not provided by classical commercial GIS software), also identified during the assessment of needs, are developed. This methodology was applied, on an experimental basin, in the Ialomita River basin.

Results

The results obtained from this action-research project consist of a set of tangible elements, among which (1) a conceptual data model adapted to the Romanian specificities regarding water resources management (needs, data availability, etc.), (2) a related spatial relational database (objects and attributes in tables, links, etc.), that can be used to store the data collected, among others, by the water administration, and later on exploited with geographical information systems, (3) a toolbar (in the ESRI environment) offering the requested data processing and visualizing functionalities. Lessons learned from this whole process can be considered as additional, although less tangible, results.

Discussion

The applied methodology is fairly classical and did not come up with revolutionary results. Actually, the interesting aspects of this work are, on the one hand, and obviously, the fact that it produced tools matching the needs of the local (if not national) water administration (i.e. with a good chance of being effectively used in the day-to-day practice), and, on the other hand, the adaptations and adjustments that were needed both at the staff level and in technical terms.

Conclusions

This research showed that a GIS-based water management system needs to be backed by some basic data management tools that form the necessary support upon which a GIS can be deployed. The main lesson gained is that technology transfer has to pay much attention to the differences in existing situations and backgrounds in general, and therefore must be able to show much flexibility. The fact that the original objectives could be adapted to meet the real needs of the local end-users is considered as a major aspect in achieving a successful adaptation and development of water resources management tools. Time needed to setup things in real life was probably the most underestimated aspect in this technology transfer process.

Recommendations and perspectives

The whole material produced (conceptual data model, database and GIS tools) was disseminated among all river basin authorities in Romania on the behalf of the national water administration (ANAR). The fact that further developments, for example, to address water quantity issues more precisely, as envisaged by ANAR, can be seen as an indication that this project succeeded in providing an appropriate input to improve water quality in Romania on the long term.

     

Influence of natural events on the concentration and composition of atmospheric particulate matter

A ten-month field study aimed to determine the contribution of natural events (i.e. sea-salt and mineral dust events) to urban PM concentration was carried out at six sampling sites in Central Italy (Lazio region). Four indicators have been used to identify natural events during the period of the study. The first one is constituted by the ratio between number of particles in the coarse to the accumulation mode. It is simple, cheap, and the information are given in quasi-real time, but the nature of the event (sea-salt or mineral dust) is not detectable. The second indicator relies on the chemical analysis of the collected PM by X-ray fluorescence (XRF) and allows a robust identification of sea-salt and crustal components. The third one is based on diagnostic ratios of elemental fractions: Mg_extractable/Ti_residue for sea-salt and Ti_residue/Sb_residue for mineral dust. It requires skilled staff but it is most accurate and sensible. The last indicator, constructed on the basis of natural radioactivity data, is not diagnostic for the nature of the event but it is able to estimate the increase in PM concentration with respect to the expected concentration in the absence of natural events.The relevance of natural events and the variations in PM concentration and composition during the study are discussed. The joined use of the four indicators allowed the identification of about 20 natural PM episodes. In general, sea-salt aerosol events did not cause exceedance of the daily EU limit value for PM₁₀. Saharan dust events, instead, were in most cases responsible for the exceedance of the limit value at all stations.     

Conceptual issues in designing a policy to phase out metal-based antifouling paints on recreational boats in San Diego Bay

In marine areas throughout the world where recreational boats are densely located, concentrations of copper in the water are being found to be in excess of government standards, due to the hull coatings used on these boats. Copper-based hull coatings are intended to be antifouling in that they retard the growth of algae, barnacles and tubeworms; but alternatives exist that can eliminate the harm that copper contamination does to marine organisms. A variety of policy options are available to mandate or provide economic incentives to switch to these less harmful alternatives. This paper puts forth a conceptual framework for thinking about how to design and evaluate alternative policies to transition to nontoxic boat hulls, drawing from the authors' experience designing a policy for use in San Diego Bay. Many of the issues raised are broadly applicable to environmental problems where the solution involves a large-scale replacement of durable consumer goods.     

Sustainability Assessment for Agriculture Scenarios in Europe’s Mountain Areas: Lessons from Six Study Areas

Sustainability assessment (SA) is a holistic and long-range strategic instrument capable of assisting policy-making in electing, and deciding upon, future development priorities. The outcomes of an SA process become more relevant and strengthened when conducted with multi-stakeholder engagement, which provides for multiple dialogues and perspectives. This was the object of research of the SA team in the context of BioScene (Scenarios for Reconciling Biodiversity Conservation with Declining Agriculture Use in Mountain Areas in Europe), a three-year project (2002–2005) funded by the European Union 5th Framework Program, which aimed to investigate the implications of agricultural restructuring and decline for biodiversity conservation in the mountain areas of Europe, using three distinct methodological streams: the ecological, the socio-economic, and the SA approaches. The SA approach drew on the previous two to assess the importance for biodiversity management of different scenarios of agri-environmental change and rural policy in six countries (France, Greece, Norway, Slovakia, Switzerland, and the United Kingdom), develop causal chains, include stakeholder views, and identify potential contributions for, or conflicts with, sustainability. This article tells how SA was used, what sustainability meant in each study area through different objectives of sustainability considered, discusses the methods used in SA, and the benefits arising. The SA was conducted by a team independent of any study area, who developed and oversaw the application of the SA methodology, assisting national teams, and developing a cross-country understanding of the sustainability of proposed scenarios in the different geographical and social contexts, and their implications for policy-making. Finally, it reflects on the persistent challenges of interdisciplinary research, compounded by multi-cultural teams, and concludes on the BioScene’s lessons for the further development and application of SA.

A soil sampling intercomparison exercise for the ALMERA network

Soil sampling and analysis for radionuclides after an accidental or routine release is a key factor for the dose calculation to members of the public, and for the establishment of possible countermeasures. The IAEA organized for selected laboratories of the ALMERA (Analytical Laboratories for the Measurement of Environmental Radioactivity) network a Soil Sampling Intercomparison Exercise (IAEA/SIE/01) with the objective of comparing soil sampling procedures used by different laboratories. The ALMERA network is a world-wide network of analytical laboratories located in IAEA member states capable of providing reliable and timely analysis of environmental samples in the event of an accidental or intentional release of radioactivity. Ten ALMERA laboratories were selected to participate in the sampling exercise. The soil sampling intercomparison exercise took place in November 2005 in an agricultural area qualified as a “reference site”, aimed at assessing the uncertainties associated with soil sampling in agricultural, semi-natural, urban and contaminated environments and suitable for performing sampling intercomparison. In this paper, the laboratories sampling performance were evaluated.     

Economic assessment of managing processionary moth in pine forests: a case-study in Portugal

This paper assesses the private and social profitability of current strategies for managing processionary moth (Thaumetopoea pityocampa) in Portuguese pine forests, looking at economic and environmental costs and benefits. Costs include the expenses for forest treatment and the social costs of threats to human health (dermatitis amongst others); benefits are assessed in terms of both revenue and social benefits such as carbon fixation and recreation. The evaluation was done using Cost Benefit Analysis (CBA) as an analytical framework. While this tool is currently applied to forest and environmental assessment and specific applications to pest management strategies are to be found in agricultural economics, rather few attempts have been made in the field of forest pest management. In order to assess and compare with--without options, a case-study was analysed for the Setúbal Peninsula, south of Lisbon, an area where extensive stands of maritime pine (Pinus pinaster) grow. The exercise has shown that CBA can be a valuable tool for assessing the economic and social profitability of pest management. The results demonstrate that the loss of revenues in the no-management option is not sufficient to make pest management profitable for private forest owners in the short-term. Conversely, a social profit is gained as pest management minimizes health risks for humans and avoids possible recreational losses.     

Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.