Environmental performance evaluation of agro-industrial innovations – part 1: Ambitec-Life Cycle,a methodological approach for considering life cycle thinking

As sustainability considerations increasingly dominate the technology development debate worldwide, practical approaches to assess environmental performance of innovations have been warranted. The present study (Part 1) introduces Ambitec-Life Cycle, a method derived from Ambitec-Agro for considering life cycle thinking in the environmental performance evaluation (EPE) of agro-industrial innovations. An agro-industrial innovation case study related to residue recycling is presented, revealing steps in the product life cycle where opportunities are best for technological improvements. In Part 2 (this issue) of this study, a methodological approach for considering the environmental vulnerability of watersheds and to integrate this analysis in EPE methods is presented. This approach is applied to Ambitec-Life Cycle and to the same residue case study, allowing the identification of performance indicators with greater potential to cause impacts at the studied watersheds.     

Experimental and life cycle assessment analysis of gas emission from mechanically–biologically pretreated waste in a landfill with energy recovery

The global gaseous emissions produced by landfilling the Mechanically Sorted Organic Fraction (MSOF) with different weeks of Mechanical Biological Treatment (MBT) was evaluated for an existing waste management system. One MBT facility and a landfill with internal combustion engines fuelled by the landfill gas for electrical energy production operate in the waste management system considered. An experimental apparatus was used to simulate 0, 4, 8 and 16 weeks of aerobic stabilization and the consequent biogas potential (Nl/kg) of a large sample of MSOF withdrawn from the full-scale MBT. Stabilization achieved by the waste was evaluated by dynamic oxygen uptake and fermentation tests. Good correlation coefficients (R²), ranging from 0.7668 to 0.9772, were found between oxygen uptake, fermentation and anaerobic test values. On the basis of the results of several anaerobic tests, the methane production rate k (year^?1) was evaluated. k ranged from 0.436 to 0.308 year^?1 and the bio-methane potential from 37 to 12 N m³/tonne, respectively, for the MSOF with 0 and 16 weeks of treatment. Energy recovery from landfill gas ranged from about 11 to 90 kW h per tonne of disposed MSOF depending on the different scenario investigated. Life cycle analysis showed that the scenario with 0 weeks of pre-treatment has the highest weighted global impact even if opposite results were obtained with respect to the single impact criteria. MSOF pre-treatment periods longer than 4 weeks showed rather negligible variation in the global impact of system emissions.     

Effects of ozone fumigation treatment on the removal of residual difenoconazole from strawberries and on their quality

The effect of ozone fumigation on the reduction of difenoconazole residue on strawberries was studied. Strawberries were immersed in 1.0 L of aqueous solution containing 400 μL of the commercial product (250 g L^?1 of difenoconazole) for 1 min. Then, they were dried and exposed to ozone gas (O₃) at concentrations of 0.3, 0.6 and 0.8 mg L^?1 for 1 h. The ozone fumigation treatments reduced the difenoconazole residue on strawberries to concentrations below 0.5 mg kg^?1, which corresponds to a 95% reduction. The strawberries treated with ozone and the control group, which was not treated with ozone, were stored at 4°C for 10 days. Some characteristics of the fruit were monitored throughout this period. Among these, pH, weight loss and total color difference did not change significantly (P > 0.05). The fumigation with ozone significantly affected the soluble solids, titratable acidity and ascorbic acid content (vitamin C) of the strawberries preventing a sharp reduction of these parameters during storage.     

Dimensions of Job Control in Computerized and Traditional Office Work and Its Health Effects

This study investigates whether a consistent relationship exists between computerization and job control. It also examines the role of job control as a predictor of stress symptoms typical for data entry and word processing (VDU) work. Two groups of VDU users and two comparable non-VDU-user groups took part in this study. A special questionnaire made it possible to assess global job control and four indexes of control related to specific aspects of work (control over choice of tasks and methods, control over time frame, control related to one’s skill, and control related to participation in the decision-making process). Results did not show an unequivocal relation between computerization and the latitude of control. The latitude of control depends on the task performed and the aspect of control we are considering. Regression analyses showed that global control is a good predictor of job satisfaction, some mood disturbances, and visual complaints. The other aspects of control are related in a variety of ways to stress symptoms. The role of a Type A behavior pattern in the relationship between job control and stress symptoms varies depending on which aspect of control is being considered. It was concluded that because of the high functional differences between various aspects of control, it is better to avoid using the concept of global control and, when possible, apply specific indexes of control.     

Influence of sugar cane vinasse on the sorption and degradation of herbicides in soil under controlled conditions

This study reports the influence of sugar cane vinasse on the persistence, sorption and leaching potential of diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea), hexazinone (3-cyclohexyl-6-(dimethylamino)-1-methyl-1,3,5-triazine-2,4-dione) and tebuthiuron (1-(5-tert-butyl-1,3,4-thiadiazol-2-yl)-1,3-dimethylurea) in both a clay and sandy soil from a tropical area of Brazil. The experiments were conducted out under controlled laboratory conditions. The addition of sugarcane vinasse to soil influenced the persistence and sorption of the herbicides in both the studied clay and sandy soils, with a considerable decrease in the diuron DT₅₀ values in clay soil. The Ground Water Ubiquity Score (GUS) Index classifies the herbicides as leachers in both soils and treatments, with the exception of diuron, which is classified as a non-leacher in clay soil-vinasse and as a transient herbicide in sandy soil. These results suggest that special attention should be given to areas such as those where the sandy soil was collected in this study, which is a recharge area of the Guarani Aquifer and is likely to experience groundwater contamination due to the high leaching potential of the applied pesticides.     

The impact of the 12 May 2008 Wenchuan earthquake on industrial facilities

This study describes the results of a field trip to the area affected by the 12 May, 2008, Wenchuan earthquake to analyse its impact on industrial facilities. The damage severity correlates well with the age of the plant, with older facilities having suffered more extensive and severe damage than those built more recently according to the latest design codes. The main cause of worker death and injury was the collapse of warehouses, office and manufacturing buildings. This concerned mostly concrete structures with insufficient confinement or poor reinforcement. The falling debris resulted in equipment damage and loss, as well as pipe severing and crushing. Pipes were also severed or bent when connected tanks were displaced or buildings collapsed. Numerous hazardous-materials releases occurred with spills being the dominant accident scenario. In some sites soil–liquefaction induced damage was evident, highlighting the need to consider potential site effects when selecting the location for a facility. The impact of the Wenchuan earthquake on chemical facilities confirms the findings from other earthquakes in terms of typical Natech damage and failure modes, as well as of hazardous-materials release potential and mechanisms.     

Estimating tree bole volume using artificial neural network models for four species in Turkey

Tree bole volumes of 89 Scots pine (Pinus sylvestris L.), 96 Brutian pine (Pinus brutia Ten.), 107 Cilicica fir (Abies cilicica Carr.) and 67 Cedar of Lebanon (Cedrus libani A. Rich.) trees were estimated using Artificial Neural Network (ANN) models. Neural networks offer a number of advantages including the ability to implicitly detect complex nonlinear relationships between input and output variables, which is very helpful in tree volume modeling. Two different neural network architectures were used and produced the Back propagation (BPANN) and the Cascade Correlation (CCANN) Artificial Neural Network models. In addition, tree bole volume estimates were compared to other established tree bole volume estimation techniques including the centroid method, taper equations, and existing standard volume tables. An overview of the features of ANNs and traditional methods is presented and the advantages and limitations of each one of them are discussed. For validation purposes, actual volumes were determined by aggregating the volumes of measured short sections (average 1 meter) of the tree bole using Smalian's formula. The results reported in this research suggest that the selected cascade correlation artificial neural network (CCANN) models are reliable for estimating the tree bole volume of the four examined tree species since they gave unbiased results and were superior to almost all methods in terms of error (%) expressed as the mean of the percentage errors.