Verification of the geographical origin of modeled air-mass trajectories by means of the isotope composition of rainwater during the SALLJEX experiment

The SALLJEX experiment was held during the summer 2002–2003. It consisted of three-dimensional observation of the atmosphere to study the structure of the low level jet along the eastern slopes of the Andes. Daily precipitation water samples were collected at two stations (Resistencia and Salta) in northern Argentina and isotope content was analyzed. The isotope data were used in conjunction with air parcel trajectories obtained from a 3-D kinematic model (3D-MTC) developed by the University of Sao Paulo, Brazil. Values of deuterium excess were related with air masses of continental origin, whilst low values were associated with air masses with longer oceanic trajectories. Furthermore, although data are scarce, results show that oxygen-18 and deuterium excess in rainwater are related with the occurrence of the low level jet.     

Medical geochemistry research in Spišsko-Gemerské rudohorie Mts., Slovakia

This study presents an assessment of the potential impact of geological contamination of the environment on the health of the population in Spišsko-Gemerské rudohorie Mts. (SGR Mts.). The concentration levels of potentially toxic elements (mainly As, Cd, Cu, Hg, Pb, Sb, and Zn) were determined in soils, groundwater, surface water, and stream sediments as well as in the food chain (locally grown vegetables). A medical study included some 30 health indicators for all 98 municipalities of the study area. The As and Sb contents in human fluids and tissues were analyzed in one municipality identified to be at the highest risk. Based on element content, environmental and health risks were calculated for respective municipalities. Out of 98 municipalities 14 were characterized with extremely high environmental risk and 10 were characterized with very high carcinogenic risk from arsenic (groundwater). Extensive statistical analysis of geochemical data (element contents in soils, groundwater, surface water, and stream sediments) and health indicators was performed. Significant correlations between element contents in the geological environment and health indicators, mainly cancer and cardiovascular diseases, were identified. Biological monitoring has confirmed the transfer of elements from the geological environment to human fluids and tissues as well as to the local food chain.     

A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated.This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products.The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the “boom” in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.     

Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application

The use of organic municipal wastes as soil amendments is an increasing practice that can divert significant amounts of waste from landfill, and provides a potential source of nutrients and organic matter to ameliorate degraded soils. Due to the high heterogeneity of organic municipal waste streams, it is difficult to rapidly and cost-effectively establish their suitability as soil amendments using a single method. Thermal analysis has been proposed as an evolving technique to assess the stability and composition of the organic matter present in these wastes. In this study, three different organic municipal waste streams (i.e., a municipal waste compost (MC), a composted sewage sludge (CS) and a thermally dried sewage sludge (TS)) were characterized using conventional and thermal methods. The conventional methods used to test organic matter stability included laboratory incubation with measurement of respired C, and spectroscopic methods to characterize chemical composition. Carbon mineralization was measured during a 90-day incubation, and samples before and after incubation were analyzed by chemical (elemental analysis) and spectroscopic (infrared and nuclear magnetic resonance) methods. Results were compared with those obtained by thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Total amounts of CO₂ respired indicated that the organic matter in the TS was the least stable, while that in the CS was the most stable. This was confirmed by changes detected with the spectroscopic methods in the composition of the organic wastes due to C mineralization. Differences were especially pronounced for TS, which showed a remarkable loss of aliphatic and proteinaceous compounds during the incubation process. TG, and especially DSC analysis, clearly reflected these differences between the three organic wastes before and after the incubation. Furthermore, the calculated energy density, which represents the energy available per unit of organic matter, showed a strong correlation with cumulative respiration. Results obtained support the hypothesis of a potential link between the thermal and biological stability of the studied organic materials, and consequently the ability of thermal analysis to characterize the maturity of municipal organic wastes and composts.     

Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Estimation of end of life mobile phones generation: the case study of the Czech Republic

The volume of waste electrical and electronic equipment (WEEE) has been rapidly growing in recent years. In the European Union (EU), legislation promoting the collection and recycling of WEEE has been in force since the year 2003. Yet, both current and recently suggested collection targets for WEEE are completely ineffective when it comes to collection and recycling of small WEEE (s-WEEE), with mobile phones as a typical example. Mobile phones are the most sold EEE and at the same time one of appliances with the lowest collection rate. To improve this situation, it is necessary to assess the amount of generated end of life (EoL) mobile phones as precisely as possible. This paper presents a method of assessment of EoL mobile phones generation based on delay model. Within the scope of this paper, the method has been applied on the Czech Republic data. However, this method can be applied also to other EoL appliances in or outside the Czech Republic. Our results show that the average total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. We impute long lifespan particularly to a storage time of EoL mobile phones at households, estimated to be 4.35 years. In the years 1990-2000, only 45 thousands of EoL mobile phones were generated in the Czech Republic, while in the years 2000-2010 the number grew to 6.5 million pieces and it is estimated that in the years 2010-2020 about 26.3 million pieces will be generated. Current European legislation sets targets on collection and recycling of WEEE in general, but no specific collection target for EoL mobile phone exists. In the year 2010 only about 3-6% of Czech EoL mobile phones were collected for recovery and recycling. If we make similar estimation using an estimated average EU value, then within the next 10 years about 1.3 billion of EoL mobile phones would be available for recycling in the EU. This amount contains about 31 tonnes of gold and 325 tonnes of silver. Since Europe is dependent on import of many raw materials, efficient recycling of EoL products could help reduce this dependence. To set a working system of collection, it will be necessary to set new and realistic collection targets.     

A spatial clustering perspective on autocorrelation and regionalization

We revisit one of the classical problems in geography and cartography where multiple observations on a lattice (N) need to be grouped into many fewer regions (G), especially when this number of desired regions is unknown a priori. Since an optimization through all possible aggregations is not feasible, a hierarchical classification scheme is proposed with an objective function sensitive to spatial pattern. The objective function to be minimized during the assignment of observations to regions (classification) consists of two terms: the first characterizes accuracy and the second, model complexity. For the latter, we introduce a spatial measure that characterizes the number of homogeneous patches rather than the usual number of classes. A simulation study shows that such a classification procedure is less sensitive to random and spatially correlated error (noise) than non-spatial classification. We also show that for conditional autoregressive error (noise) fields the optimal partitioning is the one that has the highest within-units generalized Moran coefficient. The classifier is implemented in ArcView to demonstrate both a socio-economic and an environmental application to illustrate some potential applications.

Sexual selection and the function of a melanin-based plumage ornament in polygamous penduline tits <Emphasis Type="Italic">Remiz pendulinus</Emphasis>

Melanin-based ornaments are often involved in signaling aggression and dominance, and their role in sexual selection is increasingly recognized. We investigated the functions of a melanin-based plumage ornament (facial ‘mask’) in male Eurasian penduline tits Remiz pendulinus in the contexts of male–male aggression, mating success, and parental care. The penduline tit is a passerine bird with a unique mating system in which both sexes may mate with several mates in a breeding season, and one (or both) parent deserts the clutch. Our study revealed that mask size of males is more likely an honest signal used by females in their mate choice decisions than a trait involved in male–male competition. First, mask size increased with both age and body condition, indicating that the mask may signal male quality. Second, males with larger masks paired more quickly and had more mates over the breeding season than males with smaller masks. Third, we found no evidence that male mask size signals male–male aggression or dominance during competitive encounters. The increased mating success of large-masked males, however, did not translate into higher reproductive success, as nestling survival decreased with mask size. Therefore, we conclude that there is either no directional selection on male mask size or males with larger masks receive indirect, long-term benefits.     

Global burned-land estimation in Latin America using MODIS composite data.

This paper presents results of the AQL2004 project, which has been develope within the GOFC-GOLD Latin American network of remote sensing and forest fires (RedLatif). The project intended to obtain monthly burned-land maps of the entire region, from Mexico to Patagonia, using MODIS (moderate-resolution imaging spectroradiometer) reflectance data. The project has been organized in three different phases: acquisition and preprocessing of satellite data; discrimination of burned pixels; and validation of results. In the first phase, input data consisting of 32-day composites of MODIS 500-m reflectance data generated by the Global Land Cover Facility (GLCF) of the University of Maryland (College Park, Maryland, U.S.A.) were collected and processed. The discrimination of burned areas was addressed in two steps: searching for "burned core" pixels using postfire spectral indices and multitemporal change detection and mapping of burned scars using contextual techniques. The validation phase was based on visual analysis of Landsat and CBERS (China-Brazil Earth Resources Satellite) images. Validation of the burned-land category showed an agreement ranging from 30% to 60%, depending on the ecosystem and vegetation species present. The total burned area for the entire year was estimated to be 153 215 km2. The most affected countries in relation to their territory were Cuba, Colombia, Bolivia, and Venezuela. Burned areas were found in most land covers; herbaceous vegetation (savannas and grasslands) presented the highest proportions of burned area, while perennial forest had the lowest proportions. The importance of croplands in the total burned area should be taken with reserve, since this cover presented the highest commission errors. The importance of generating systematic products of burned land areas for different ecological processes is emphasized.     

Resource limitation of bacterial production distorts the temperature dependence of oceanic carbon cycling

Our view of the effects of temperature on bacterial carbon fluxes in the ocean has been confounded by the interplay of resource availability. Using an extensive compilation of cell-specific bacterial respiration (BRi) and production (BPi), we show that both physiological rates respond to changing temperature in a similar manner and follow the predictions of the metabolic theory of ecology. Their apparently different temperature dependence under warm, oligotrophic conditions is due to strong resource limitation of BP, but not of BRi. Thus, and despite previous preconception, bacterial growth efficiency (BGE = BPi/[BPi + BRi]) is not directly regulated by temperature, but by the availability of substrates for growth. We develop simple equations that can be used for the estimation of bacterial community metabolism from temperature, chlorophyll concentration, and bacterial abundance. Since bacteria are the greatest living planktonic biomass, our results challenge current understanding of how warming and shifts in ecosystem trophic state will modify oceanic carbon cycle feedbacks to climate change.