Degradation of polycyclic aromatic hydrocarbons by combined chemical pre-oxidation and bioremediation in creosote contaminated soil

The ability of pre-oxidation to overcome polycyclic aromatic hydrocarbons (PAH) recalcitrance to biodegradation was investigated in creosote contaminated soil. Sand and peat artificially spiked with creosote (quality WEI C) were used as model systems. Ozonation and Fenton-like treatment were proved to be feasible technologies for PAH degradation in soil. The efficiency of ozonation was strongly dependent on the water content of treated soil samples. The removal of PAH by Fenton-like treatment depended on the applied H2O2/soil weight ratio and ferrous ions addition. It was determined that the application of chemical oxidation in sand resulted in a higher PAH removal and required lower oxidant (ozone, hydrogen peroxide) doses. The enhancement of PAH biodegradability by different pre-treatment technologies also depended on the soil matrix. It was ascertained that combined chemical and biological treatment was more efficient in PAH elimination in creosote contaminated soil than either one alone. Thus, the combination of Fenton-like and the subsequent biological treatment resulted in the highest removal of PAH in creosote contaminated sand, and biodegradation with pre-ozonation was found to be the most effective technology for PAH elimination in peat.     

Silver impregnated carbon for adsorption and desorption of elemental mercury vapors

The Hg0 vapor adsorption experimental results on a novel sorbent obtained by impregnating a commercially available activated carbon (Darco G60 from BDH) with silver nitrate were reported. The study was performed by using a fundamental approach, in an apparatus at laboratory scale in which a synthetic flue gas, formed by Hg0 vapors in a nitrogen gas stream, at a given temperature and mercury concentration, was flowed through a fixed bed of adsorbent material. Breakthrough curves and adsorption isotherms were obtained for bed temperatures of 90, 120 and 150°C and for Hg0 concentrations in the gas varying in the range of 0.8–5.0 mg/m3. The experimental gas-solid equilibrium data were used to evaluate the Langmuir parameters and the heat of adsorption. The experimental results showed that silver impregnated carbon was very effective to capture elemental mercury and the amount of mercury adsorbed by the carbon decreased as the bed temperature increased. In addition, to evaluate the possibility of adsorbent recovery, desorption was also studied. Desorption runs showed that both the adsorbing material and the mercury could be easily recovered, since at the end of desorption the residue on solid was almost negligible. The material balance on mercury and the constitutive equations of the adsorption phenomenon were integrated, leading to the evaluation of only one kinetic parameter which fits well both the experimentally determined breakthrough and desorption curves.     

Toxicity of tire debris leachates

Data on the indicators of environmental impact of tire debris, originated from the tire abrasion on roads, are extremely scarce, while it is well known that tires may produce deleterious effects. Tire debris contains significant quantities of zinc (Zn) which may be released by tire rubber. We have used tire particles (TD) produced in laboratory from new rubber. Two sets of experiments were set up to obtain eluates. One set used 50 and 100 g/L TD to produce eluates at pH 3-7. The Zn quantity was measured with a Inductively Coupled Plasma-Atomic Emission Spectrometry. The eluates at 1%,10%,50%,100% concentrations in culture media were tested on Raphidocelis subcapitata, Daphnia magna and Xenopus laevis embryos (FETAX test). The other set of experiments was performed putting 250 mg/L TD in a column with glass beads to control particle dispersion during the elution process. We demonstrate that factors such as pH, size and particles aggregation deeply influence the elution process, that the amount of Zn leached from particles is related to their aggregation rather than their quantity. These results, even though do not reflect the real environmental toxicity of the leachates, can be successfully used for comparative purposes allowing an initial assessment of the potential effect of tire derived particles.     

Estimation of Similarity in the Qualitative Composition of Humic Substance in Marine Sediments By Means of an Uv-Spectroscopic Library

In this paper a method for the study of the qualitative similarity of extractable humic substance (EHS) in marine sediments based on the realisation of UV spectral library of EHS is described. the spectral library was built including the digitised spectra of humic substance extracted from several marine sediments (46 samples) and two samples of standard materials (lignin sulphonate and humic substance) in a Statistica data file. the data matrix was elaborated by means of different multivariate statistic techniques such as Cluster Analysis (CA), Principal Components Analysis (PCA) and the univariate technique Spectral Correlation Analysis (SCA). This approach allows us to show the contribution of different organic compounds (aromatic, lipid and acid) to the composition of EHS and moreover it evidences also the structural characteristics of EHS in terms of similarities in the qualitative composition of samples such as presence of terrestrial and/or vegetal contributions. the UV library is an objective tool to study the qualitative composition of EHS and it represents a complementary approach to the most common methods based on the application of spectroscopic (IR, ¹³CNMR), potentiometric and chromatographic techniques.     

Hydrochemical,isotopic and microbiota characterization of telese mineral waters (Southern Italy)

Environmental Geochemistry and Health - The study deals with the analyses of springs and wells at the base of Montepugliano Hill that represents the SE edge of the wide carbonate Matese massif...     

Complex performance of novel CoNiMnB electrodeposits in alkaline borohydride solutions

The complex performance of newly synthesized CoNiMnB electrodeposits in base-stabilized sodium borohydride solutions was examined. The rate of hydrogen generation due to borohydride hydrolysis was determined at different temperatures. Activation energy of approximately 33 kJ/mol was estimated, which is lower than the values reported for other catalysts. At electrochemical conditions, there is a competition between borohydride hydrolysis and electrooxidation reactions. The electrooxidation of borohydride takes place with low overpotentials at relatively high current densities. The long-term discharge at galvanostatic conditions as well as possibilities for partial storage of generated hydrogen indicates potentials for application of studied electrodeposits as anode material in direct borohydride fuel cells (DBFC).     

The passion bug: How and when do leaders inspire work passion?

Drawing from signaling theory, we propose a work passion transfer model where leaders' passion is transmitted to employees through the former's leadership style and is contingent on employees' perceived importance of performance to self-esteem (IPSE). Data from 201 supervisor–employee dyads from the health-care industry show that leaders' harmonious passion led to employees' harmonious passion through charismatic leadership, whereas contingent reward leadership accounted for the transfer of obsessive passion; IPSE did not play a moderating role for either form of passion. Results from a supplementary study further reveal that the link between leadership and employee passion operated through employees' perception of leader passion and that employees' IPSE accentuated for the relationship between perceived leader obsessive passion and employees' obsessive passion. This study advances research in work passion, leadership, and signaling theory and provides important implications for managerial practice.