Evaluation of Direct-Oxidative DNA Damage on Human Lung Epithelial Cells Exposed to Urban Airborne Particulate Matter

Airborne particulate matter (PM) extracts were investigated for their content of organic compounds and for the direct and oxidative DNA damage induced on lung epithelial cells A549. PM₁₀ was seasonally collected at two monitoring sites (Stations 1 and 2), characterized by different traffic loads. The cells were exposed for 30 min to extracts of PM₁₀ diluted at 0.025%, 0.05%, and 0.1% for summer samples, and at 0.05%, 0.1%, and 0.15% for winter samples. Oxidative and direct DNA damage were evaluated by formamidopyrimidine glycosylase (fpg) comet assay analyzing tail moment (TM) values from fpg-enzyme-treated cells (TMenz) and enzyme untreated cells (TM) respectively and by comet percentage analysis. Measurements relating to Station 2 showed higher levels of polycyclic aromatic hydrocarbons (PAHs), and their methyl-(methyl-PAHs) and nitro-(nitro-PAHs) derivatives in both the seasons. Nitro-PAH concentrations were higher in summer than in winter at both the stations. We found a significant increase of comet percentages at the highest dose of extract from both stations in summer and from Station 2 in winter. The TM and TMenz values relative to the summer sampling showed an early oxidative DNA damage induction also followed by direct DNA damage more evident at Station 2, that seems to correlate with the presence of higher nitro-PAH concentrations during the warm season. At both monitoring stations, the results from winter sampling campaign showed a direct DNA damage induction at 0.1% of extract and oxidative-direct DNA damage at the highest dose (0.15%).     

Life cycle assessment of urban waste management: energy performances and environmental impacts. The case of Rome, Italy

Landfilling is nowadays the most common practice of waste management in Italy in spite of enforced regulations aimed at increasing waste pre-sorting as well as energy and material recovery. In this work we analyse selected alternative scenarios aimed at minimizing the unused material fraction to be delivered to the landfill. The methodological framework of the analysis is the life cycle assessment, in a multi-method form developed by our research team. The approach was applied to the case of municipal solid waste (MSW) management in Rome, with a special focus on energy and material balance, including global and local scale airborne emissions. Results, provided in the form of indices and indicators of efficiency, effectiveness and environmental impacts, point out landfill activities as the worst waste management strategy at a global scale. On the other hand, the investigated waste treatments with energy and material recovery allow important benefits of greenhouse gas emission reduction (among others) but are still affected by non-negligible local emissions. Furthermore, waste treatments leading to energy recovery provide an energy output that, in the best case, is able to meet 15% of the Rome electricity consumption.     

Mycelium growth and degradation of creosote-treated wood by basydiomycetes

Tolerance of wood decay fungi of the genera Agrocybe, Armillaria, Auricularia, Daedalea, Pleurotus, Trametes to the presence of various amounts of creosote-treated wood (CTW) in the growth medium was compared. In the case of the most tolerant strain, Pleurotus ostreatus SMR 684, extracellular laccase and peroxidase specific activities were monitored during growth in the presence of CTW. Degradation of various creosote-constituting polycyclic aromatic hydrocarbons by this strain was evaluated by GC-MS and the ecotoxicity of treated and untreated CTW was compared by Microtox test.     

Association between micronuclei frequency in pollen mother cells of Tradescantia and mortality due to cancer and cardiovascular diseases: A preliminary study in Sao José dos Campos, Brazil

The present study was designed to explore the correlation between the frequency of micronuclei in Trad-MN, measured across 28 biomonitoring stations during the period comprised between 11 of May and 2 of October, 2006, and adjusted mortality rates due to cardiovascular, respiratory diseases and cancer in Sao José dos Campos, Brazil, an area with different sources of air pollution. For controlling purposes, mortality rate due to gastrointestinal diseases (an event less prone to be affected by air pollution) was also considered in the analysis. Spatial distribution of micronuclei frequency was determined using average interpolation. The association between health estimators and micronuclei frequency was determined by measures of Pearson's correlation. Higher frequencies of micronuclei were detected in areas with high traffic and close to a petrochemical pole. Significant associations were detected between micronuclei frequency and adjusted mortality rate due to cardiovascular diseases (r = 0.841, p = 0.036) and cancer (r = 0.890, p = 0.018). The association between mortality due to chronic obstructive pulmonary diseases was positive but did not reach statistical significance (r = 0.640, p = 0.172), probably because of the small number of events. Gastrointestinal mortality did not exhibit significant association with micronuclei frequency. Because the small number of observations and the nature of an ecological study, the present findings must be considered with caution and considered as preliminary. Further studies, performed in different conditions of contamination and climate should be done before considering Trad-MN in the evaluation of human health risk imposed by air pollutants.     

Air pollutants and the characterization of the organic content of aerosol particles in a mixed industrial/semi-rural area in central Italy

Both regulated and unregulated air pollutants were detected during an intensive seasonal sampling campaign in a mixed industrial/semi-rural area on the outskirts of Rome, Italy, at two sites located opposite a hospital waste incinerator, downwind according to the direction of the prevailing local winds. Concentrations of pollutants were significantly lower than in urban atmospheres. The composition of particulate organic material indicated a heavy biogenic impact, accompanied by a lower contribution from petroleum-related processes. Both PAH and nitro-PAH group compositions of particulates were used to assess the nature and relative importance of sources. Both sites showed that different and diffuse sources contributed to local pollution with a significant contribution from traffic, proving that the hospital waste incinerator was not the main pollution source in this area. Among unregulated compounds, a series of positional isomers of nitro-PAHs and other organic compounds associated with particulate matter were investigated. In particular, 1- and 3-nitrophenanthrene identification was carried out, and they proved to be the most abundant nitro-PAHs.     

Application of nano-FIA-Direct-EI-MS to determine diethylene glycol in produced formation water discharges and seawater samples

Diethylene glycol (DEG) is extensively used on offshore gas platforms to prevent the hydrate formation during the gas-water separation process and to inhibit corrosion events. This chemical might enter in the marine environment via the produced formation water (PFW) discharge. In this study, a new approach was applied to the investigation of the DEG content in PFW discharges and seawater samples from four gas installation platforms in the Adriatic Sea (Italy). The method includes an off-line solid-phase extraction/pre-concentration technique, followed by a nanoscale flow injection/direct-electron ionization (EI) mass spectrometric analysis. Direct-EI is a novel and miniaturized interface for directly coupling a liquid chromatograph with an electron ionization mass spectrometer. The capability to acquire EI spectra, and to operate in selected ion monitoring mode during actual sample analyses, allowed a precise quantification of DEG with a method limit of detection of 31microg/l. In addition, a careful evaluation of the matrix effect showed that, as opposed to electrospray ionization, the response of the Direct-EI interface was not affected by sample interferences.     

A study on PCB, PCDD/PCDF industrial contamination in a mixed urban-agricultural area significantly affecting the food chain and the human exposure. Part I: soil and feed

This study deals with a PCB, PCDD and PCDF contamination in Brescia, a city in the North-West of Italy, affecting an area with about 11000 inhabitants. The area is close to an industrial plant that produced, in total, some 31,000 ton of PCB. A relevant part of the polluted area is agricultural soil, where cattle were fed with polluted forage and farmers were consuming their own products, so that contamination led eventually to human exposure. Total levels of PCDD/Fs varied from 8 to 592 pgTE(WHO)/g for soil samples and when the dioxin-like PCBs (dl-PCBs) are included, the levels varied from 14.6 to 1033.7 pgTE(WHO)/g. In several cases, the legal limit was exceeded by more than one order of magnitude, with the highest contamination in some agricultural areas and in the surrounding zones. For the forage samples, total levels of PCDD/Fs varied from 0.29 to 2.04 pgTE(WHO)/g and, when dl-PCBs are included, this range increased from 2.04 to 4.75 pgTE(WHO)/g. PCB contamination of the forage through vapor condensation seemed to be relevant. The toxic contribution of dl-PCBs is always relevant and must be considered for risk management. The main component of the contamination source is probably a heavy PCB mixture, such as Aroclor 1262. The study dealt generally with the contamination transfer of PCBs, PCDDs and PCDFs from soil up to humans across the food chain. Results on soils and forages are shown, while measurements concerning the contamination of the animals fed with contaminated forage, and the exposure of the farmers (through human serum analyses), as compared to general population, will be reported in a dedicated paper.     

Environmental release and mass flux partitioning of PCDD/Fs during normal and transient operation of full scale waste to energy plants

The paper reports on global release and mass partitioning in the flux of residues of PCDD/Fs, evaluated with dedicated field campaigns at a municipal solid waste incineration plant during normal and transient operation. Results are compared with those obtained in other installations equipped with furnaces, energy recovery options and flue gas treatment technologies representative of most of the European incineration plants currently in operation. Levels of the pollutants of interest were determined in all the solid, liquid and gaseous residues produced by every single facility, and the results analysed in terms of the effects arising from the fed waste and the configuration of the plant. PCDD/Fs total release between 1.5 and 45 microg I-TEQ per ton of burned waste was evaluated, with lower values resulting from the adoption of catalytic conversion process for flue gas treatment. Most of the mass flux emitted is associated with solid residues deriving from activated carbon PCCD/F dry removal options, with significant contributions also from fly ash produced by particulate removal devices located immediately downstream the boiler and from scrubber blowdowns treatment sludge. During transient operating conditions the dioxin total release may increase by 50% with comparison to steady-state functioning.     

Geochemical characterization and health risk assessment in two diversified environmental settings (Southern Italy)

Environmental Geochemistry and Health - An integrated approach using chemical and microbial indicators has been tested in two different sites of the Campania Plain (Southern Italy) with different...