Energy efficiency during conventional and novel sintering processes: the case of Ti–Al2O3–TiC composites

The conventional (hot pressing or HP) and the novel (spark plasma sintering or SPS) consolidation techniques were compared when processing Ti–Al₂O₃–TiC powders obtained by self-propagating high-temperature synthesis (SHS). It was found that the two different methods are able to produce similar materials, in some cases (Vickers hardness and wear rate) slightly better for SPSed samples. However, SPS does not need sintering temperatures as high as HP to obtain fully dense products. Most significantly, processing times were strongly reduced when adopting the SPS technique instead of HP, i.e. 4–7 min and about 5 h, respectively. Finally, when the total energies required during each SPS or HP experiment were compared, it was found that the use of the SPS technology allowed for an energy saving in the order of 90–95%. This fact makes SPS significantly advantageous from environmental and economical points of view compared to HP.     

Size,spatial, and bathymetrical distribution of the ascidian Halocynthia papillosa in Mediterranean coastal bottoms: benthic–pelagic coupling implications

Benthic suspension feeders are abundant in Mediterranean coastal environments, though most of them are threatened due to overexploitation, climate change impacts, and unregulated diving or fishing practices. Little is known about most of the coastal communities in terms of large-scale distribution and realistic benthic–pelagic coupling implications, which are keys to understand and manage those threatened ecosystems. The active suspension feeder Halocynthia papillosa (one of the most common ascidian species of the Mediterranean Sea) was selected as a model organism to help to understand the ecological role in benthic–pelagic coupling processes and its importance as a carbon sink (an essential ecosystem service). The spatial and bathymetrical distribution of this organism has been studied using remotely operated vehicle video transects. The species was distributed throughout the study area, with a maximum density of 4 specimens m^?2. The highest abundances and the biggest sizes were observed on the range of 20–50 m depth. The role as carbon and nitrogen sink of this suspension feeder has been quantified coupling distribution data with existing in situ studies of feeding and respiration. Along the 1.24 ha of the study area, H. papillosa yearly ingested 519.4 g C and 31.4 g N and retained 20.2 g C. As long as the physiological data are known, this new methodology could be very useful in assessing bentho–pelagic links and the capacity of being C and N sinks of a wide range of species. This new approach may be essential for the future management of benthic communities.     

Robotic testing of radio frequency devices designed for industrial safety

An experimental setup is proposed to test the performance of safety devices based on radio frequency technology. The setup specifically tests devices designed for improving safety in dangerous areas of small size, such as those surrounding power press brakes. Tested here is a radio frequency identification (RFID) prototype, whose main objective is to prevent accidents by sending a stop signal to a machine when a worker’s wrist, bearing an RFID tag, gets too close to the dangerous area. An ABB IRB 2400L robot is used as a reference system; this system is capable of providing millimeter accuracy. A plastic hand and a wristband with at least one passive RFID tag are attached to the end of the robot arm, which emulates the behavior of a human arm. With this robotic approach, it is possible to test trajectories with different velocities and orientations and to simulate several risky situations associated with machine use. Several experiments are presented that were conducted with the RFID prototype, and statistics are reported on the distance detection capability of this safety system with respect to the plane that defines the dangerous area. A matrix approach is proposed for analyzing the robustness of safety devices that are designed to automatically prevent a worker entering in dangerous areas. The results show the benefits that development of a radio frequency device of this class could confer towards increasing worker safety.     

Where is the best site for wave energy exploitation? Case study along the coast of northern Latium (ITALY)

The present work proposes a siting process for the detection of a suitable site for wave energy exploitation. The choice of a suitable site is based on the good agreement between energy availability, environmental sustainability, and equipped facilities to exploit wave energy. The case study in the northern Latium coast is explicative because in this area there are several activities that affect marine ecosystems, and the introduction of renewable energies promote the reduction of anthropic pressures. The nearshore wave power is studied through the numerical wave model (CMS-Wave), and available wave buoys along the coast were used to compare numerical results. In correspondence with Civitavecchia harbour, the largest nearshore wave energy was found; the large depth in front of the breakwater allows to conserve a great part of offshore wave power, with an average dissipation rate of 10 % less than offshore, with mean annual available wave energy of 25.4 MWh/m and seasonal fluctuation of 5.4 MWh/m. This area appears to be an optimal site for nearshore and shoreline wave energy device tests and installations, for energy availability (intermediate level respect Mediterreanean Sea), low potential environmental impact, easier accessibility, and policy oriented towards a larger sustainability of harbour activities.     

墨西哥在一个区域合作的框架之内成功消除氯丹

一组众所周知的化学药品已被划分为持久性有机污染物(POPs)1.它们的性质包括高毒性、在环境中保留时间长、在大气中可长距离传播和能在脂肪组织中累积.与持久性有机污染物直接接触可以导致急性效应、持久性有机污染物用作农药的事故,例如,已经有使农业劳动者致死或重病的例子.     

Identification of Sudan III-(deoxy)-guanosine adducts formed in situ in a reaction with no catalyst

Incubation of guanosine and Sudan III induces the formation of a stable adduct, which may be identified using a spectrophotometric technique and mass spectroscopy. The high nucleophilicity of the C⁸ position and its proximity to N⁷ makes the site susceptible to a nucleophilic attack, which explains the S_N2 reaction detected between guanosine and Sudan III dye. In addition, direct interaction of Sudan III with calf thymus DNA was monitored using a simple spectrophotometric technique. The results presented indicate that a simple modification of the chemical structure of Sudan I (monoazo dye) to Sudan III (diazo dye) markedly alters reactivity towards nitrogenous DNA bases.     

Assessment of the Water Quality of the River Arno in the Area of Florence,Italy

The quality of the waters collected from R. Arno was examined in the period September 1988 to December 1989. A first campaign in September/October 1988, during a period of low water, gives a general picture of pollution conditions along the river from the source to the mouth. the river appears to be heavily polluted immediately downstream of Florence and in the area of the textile industry.

In the second campaign, through the whole year 1989, particular attention has been given to the Florence area; the most significant results, compared with those from a previous investigation carried out in 1971, show only a small reduction of the pollution load, due to the shortage and inadequacy of wastewater depuration. Some considerations are reported on pollution drop with full spate.     

Nutrient distribution in locations of the Gulf of Trieste (northern Adriatic sea) suspected of pollution

Nutrients (ammonium‐nitrogen, nitrite, nitrate, orthophosphate and dissolved silica) as well as some chemical‐physical parameters (temperature, pH, salinity, dissolved oxygen and total suspended matter) were determined in filtered seawater samples taken at the surface, at middle depth and at the bottom, in 6 open‐sea locations of the Gulf of Trieste (northern Adriatic Sea) close to pipeline exits that discharge wastewaters from treatment plants. The collected data allow a comparison of the quality of these open‐sea waters with coastal waters and constitute a reference for successive monitoring in these locations suspected of pollution. A multivariate statistical analysis by the principal component method shows that the considered ecosystem can be modeled with two factors: the first one is referenced to the marine environment, in particular to the decomposition of the organic debris in deep water; whereas the second factor is referenced to the input of freshwaters in the Gulf, driving nitrates from agricultural lands.     

Sequestration of prenylated benzoic acid and chromenes by Naupactus bipes (Coleoptera: Curculionidae) feeding on Piper gaudichaudianum (Piperaceae)

The curculionid beetle Naupactus bipes (Germar, 1824) (Coleoptera: Curculionidae: Brachycerinae) has shown feeding preference for leaves of Piper gaudichaudianum, demonstrating an unexpected specificity for an insect considered to be a generalist. The leaves of P. gaudichaudianum contain the prenylated chromenes gaudichaudianic acid (4, major compound) and its methyl ester (5) in addition to a chromene (3) lacking one prenyl residue. In addition to 4, roots contain the chromone methyl ester (1) and methyl taboganate (2, major compound). Feeding on roots, larvae of N. bipes sequester exclusively the root-specific compounds 1 and 2. Adult beetles sequester the leaf-specific chromenes 3 and 4, but were found to also contain compounds 1 and 2 that are absent in leaves. Therefore, it is suggested that 1 and 2 are sequestered by larvae and can be found in the body of adult insects after long-term storage. In addition, 3 and 4, the major compounds in leaves were found to be associated with the eggs.